China Lamp Pole 3m-15m Height for Choosing

Hot-dip-galvanized Steel Pole, Spray Coated Street Light Pole
Pole Height: 3M to 15M,
All Pole designs will withstand a gusted wind velocity of 150 KM/H
5.0KWH Design, Lighting Time: 11-12 Hours/Nights*3-5 Overcast Weather

Pole height6M6M8M8MLED Lamps20W30W45W60WSolar Panel90W*1PC65W*2PC90W*2PC120W*2PCSolar Battery100Ah/12V*1PC150Ah/12V*1PC120Ah/12V*2PC150Ah/12V*2PCBattery Box(Optional)Engineering SteelEngineering SteelEngineering SteelEngineering SteelBattery Box(Optional)Engineering PlasticEngineering PlasticEngineering PlasticEngineering PlasticSolar Controller10A/12V15A/12V10A/24V10A/24VPacking:40'HQ150 Units130 Units100 Units90 Units

Pole Materials
1. All materials utilized by Pole meet or exceed international. Standards or on Customize Request.
2. Poles are produced using steel, "self-weathering" steel Q235B SS400, Q235, (yield strength: 235Pa 24kg/mm2 Tensile Strength: 375-460Pa 38-47kg/mm2
Welding
The main body pole adopts the technology of the disposable shaping, The welding seam is level and smooth, The welding of the light post is the automatic Asian arc welding, All welding done by Pole conforms to GB/T3323-1989111. Any circumferential welds are 100% penetration with some shaft to baseplates jointed with inside and outside fillet welds, and longitudinal welds have a minimum penetration of of 60%.
Finishes
There are Four finishes Available for the Tubular Poles:
1) Rugh Cast
2) Prime Paint
3) The antiseptic disposing of the lamp pole is the hot galvanizing and the surface is smooth and beautiful, Hot Dip Galvanizing according GB2694- 88
4) Powder Coat according GBP286- 880
5) Powder Coat over Hot Dip Galvanizing
Accessories
Anchor Bolts, Nut & Bolt Cover
Available in M10- M32 "J" Type and "I" Type Anchor Bolts
Hot Dip Galvanized
Supplied with Hexagon Nut and Washer
High Strength Polyurethane
Handhole
Pole is supplied with customize handhole, grounding stud, handhole cover and theft-proof lock
The standard tenon size is 60mm/76mm O. D.
Any designs not shown in this catalogue can be produced by customer's requirements,
And inquiries should be communicated to company representatives.
Approval drawings are available on request.
All measurements shown here are imperial measure (mm. M, kg )