China Large CNC Heavy-duty Horizontal CNC Lathe CK61200x8000 32T Torno

CK61200x8000
Features:Flat bed structure;high rigidity;heavy load capacity and good reliability; The rotary built-in center in the tailstock features with heavy load and is easy to operate;Rapid movement function; The model of lathe is specially suitable for the following industries: paper making, textile, rubber and shipbuilding etc..The lathe is suitable to machine large sized parts, such as disc type, rubber roller; it can also cut tread, drill hole and bore hole.
ITEM SPECIFICATIONSSWING OVER BED 2,000 mmSWING OVER CARRIAGE1,600 mmDISTANCE BETWEEN CENTERS8,000 mmSUPPORT WEIGHTS BEWTEEN CENTERS63 TONSWIDTH OF BED2,050 mm WITH FLAT 4 GUIDEWAYSSPINDLE TAPER HOLE160 mm; 1:4SPINDLE SPEED2 STEPS, 0.63 TO 125 RPMBEARINGS IN SPINDLE & TAILSTOCKnsk of japanANGLE OF CENTER750DIAMETER OF CHUCK 1600 mmTORQUE OF FACEPLATE120 KN.mTYPE OF TURRETframe SUPPORT WITH TOOL ROW SIZE OF TOOL HOLDER70x70 mmTRAVEL OF X-AXIS800 mmTRAVEL OF Z-AXIS8000 mmTRAVEL OF TOOL SUPPORT300 mmMAX. CUTTING FORCE OF TOOL POST100 KNFEEDING SPEED IN X-AXIS1 TO 2000 mm/minFEEDING SPEED IN Z-AXIS1 TO 2000 mm/minRAPID TRAVEL OF X-AXIS4,000 mm/minRAPID TRAVEL OF Z-AXIS6,000 mm/minSERVO MOTOR FOR X-AXIS & Z-AXIS41 NmTAPER HOLE OF TAILSTOCK QUILL160 mm; 1:4TRAVERSE SPEED OF MOTORIZED TAILSTOCK2,500 mm/minTRAVERSE SPEED OF QUILL IN TAILSTOCKslow 10 mm/min; fast 250 mm/minPOWER OF MAIN MOTOR MADE BY CHINADC 110 KWADJUSTING SPEED DEVICE FOR MAIN MOTOR6RA70 OF SIEMENSConTROL SYSTEM SIEMENS 828DBALLSCREW OF X-AXISMADE BY GERMANYRACK AND GEARBOX OF Z-AXISMADE BY GERMANY
ACCESSORIES
FOUR JAWS CHUCK, DIA. OF 1,600 mm
STEADY REST (STEADY IN CLOSE TYPE), 500 to 750 mm
MEASURING DISPLAY FOR CENTERING FORCE IN TAILSTOCK
WORK LIGHT
Foundation boLTS and LEVELING PADS
DEAD CENTER
ConSTANT TEMPERATURE DEVICE OF LUBRICATION
ELECTRICAL CABINET WITH AIR-CONDITIONER
OPTIonAL ATTACHMENT
ROLLER SUPPORT
LINEAR ENCODER
CONVEYOR, LENGTH 6 METERS

Packing & Local Transportation & Fixing
Normally we will pack the machines with fumigated wooden cases or poly wooden case and steel pallets. When the machines are loaded into the container, fixing job will be done to ensure the sea shipment safety.
Exhibitions & Customers' Visiting
Quality Control & Inspection before Packing
We control the assembly quality as well as control the quality of casting and parts/units to ensure the machines will be good enough from appearance to performance and stability keeping.
After testing and painting before packing, we will check all the accessories item by item:
1. How can I choose the most suitable machines?
A: You can choose the exact model by yourself. Or you can tell us your specifications, to let us choose the best model for you, too.
You can also send us the product drawing, and we will choose the most suitable machines for you.
.
2. When do you deliver?
A: It depends on the machine and model you choose. Mostly 1.5 months - 3 months. All machines are 100% new and not used, only made according to your order. Occasionally there will be a few machines available from stock. You can send us a message or mail to check exact delivery time.

3. Is machine tested?
A: The accuracy, noisy will be tested according to China GB standard. Some machines will

4. What is your trade terms?
A : FOB, CFR and CIF all acceptable.

5. What's the Payment Terms?
A : T/T 30% down payment when order ,70% balance payment before shipment ;
Irrevocable L/C at sight also acceptable.

6. Do you accept cash or L/C?
A: We accept T/T or L/C, all through banking system. We do not accept cash, 'cause we are an official registered company that all payment must go through official bank account.
7. What's the MOQ?
A: 1 set (only some low cost machines will be more than 1 set)
8. How is the warranty?
A: 12 months after shipment date
9. If I have a problem setting up/ getting it running problem, will you be available by email to assist in solving the problem.
A: Video technical support, online service, we can answer you in 24 hours.