China Large Horizontal Heavy-duty CNC Lathe CK61180 1800mm Dia CNC Torno

CK61180x6000
Features:Flat bed structure;high rigidity;heavy load capacity and good reliability; The rotary built-in center in the tailstock features with heavy load and is easy to operate;Rapid movement function; The model of lathe is specially suitable for the following industries: paper making, textile, rubber and shipbuilding etc..The lathe is suitable to machine large sized parts, such as disc type, rubber roller; it can also cut tread, drill hole and bore hole.

ITEMSPECIFICATIONSSWING OVER BED1,800 mmSWING OVER CARRIAGE1,400 mmDISTANCE BETWEEN CENTERS6,000 mmSUPPORT WEIGHTS BEWTEEN CENTERS32 TONWIDTH OF BED1,600 mm WITH FLAT 3 GUIDEWAYS SPINDLE SPEED3 STEPS, 0.8 TO 160 RPMTORQUE OF FACEPLATE80 kNmDIAMETER OF SPINDLE ON THE FRONT SUPPORTING320mmSPINDLE TAPER HOLE140 mm; 1:7BEARINGS IN SPINDLENSK OF JAPANDIAMETER OF CHUCK1,600 mmTRAVEL OF X-AXIS800 mmTRAVEL OF Z-AXIS6000 mmFEEDING SPEED IN X-AXIS1 TO 1000 mm/minFEEDING SPEED IN Z-AXIS1 TO 1000 mm/minRAPIDN TRAVESE IN X-AXIS4,000 mm/minRAPIDN TRAVESE IN Z-AXIS4,000 mm/minMAX. CUTTING FORCE OF TOOL POST70 KNTRAVEL OF TOOL ROW320 mmSIZE OF TOOL HOLDER70x70 mmRANGE OF THREADING1 TO 200 mmMOVEMENT OF TAILSTOCK QUILL250 mmTAPER HOLE OF TAILSTOCK QUILL100 mm; 1:7TRAVERSE SPEED OF MOTORIZED TAILSTOCK2,500 mm/minTRAVERSE SPEED OF QUILL IN TAILSTOCK10-200 mm/minPOWER OF MAIN MOTOR WITH ADJUSTING SPEED DEVICEDC 75 KWADJUSTING SPEED DEVICE FOR MAIN MOTOR6RA70 OF SIEMENSConTROL SYSTEMSIEMENS 828DSERVO MOTOR FOR X-axis & Z-axis41 NmBALLSCREW OF X-AXISMADE BY GERMANYREDUCER OF of Z-AXISMADE BY Europe

ACCESSORIES
FOUR JAWS CHUCK, DIA. OF 1,600 mm
STEADY REST (STEADY IN CLOSE TYPE), 500 to 750 mm
MEASURING DISPLAY FOR CENTERING FORCE IN TAILSTOCK
WORK LIGHT
Foundation boLTS and LEVELING PADS
DEAD CENTER
ConSTANT TEMPERATURE DEVICE OF LUBRICATION
ELECTRICAL CABINET WITH AIR-CONDITIONER
OPTIonAL ATTACHMENT
ROLLER SUPPORT
LINEAR ENCODER
CONVEYOR, LENGTH 6 METERS



Quality Control & Inspection before Packing
We control the assembly quality as well as control the quality of casting and parts/units to ensure the machines will be good enough from appearance to performance and stability keeping.
After testing and painting before packing, we will check all the accessories item by item:
Packing & Local Transportation & Fixing
Normally we will pack the machines with fumigated wooden cases or poly wooden case and steel pallets. When the machines are loaded into the container, fixing job will be done to ensure the sea shipment safety.
Exhibitions & Customers' Visiting
1. How can I choose the most suitable machines?
A: You can choose the exact model by yourself. Or you can tell us your specifications, to let us choose the best model for you, too.
You can also send us the product drawing, and we will choose the most suitable machines for you.
.
2. When do you deliver?
A: It depends on the machine and model you choose. Mostly 1.5 months - 3 months. All machines are 100% new and not used, only made according to your order. Occasionally there will be a few machines available from stock. You can send us a message or mail to check exact delivery time.

3. Is machine tested?
A: The accuracy, noisy will be tested according to China GB standard. Some machines will

4. What is your trade terms?
A : FOB, CFR and CIF all acceptable.

5. What's the Payment Terms?
A : T/T 30% down payment when order ,70% balance payment before shipment ;
Irrevocable L/C at sight also acceptable.

6. Do you accept cash or L/C?
A: We accept T/T or L/C, all through banking system. We do not accept cash, 'cause we are an official registered company that all payment must go through official bank account.
7. What's the MOQ?
A: 1 set (only some low cost machines will be more than 1 set)
8. How is the warranty?
A: 12 months after shipment date
9. If I have a problem setting up/ getting it running problem, will you be available by email to assist in solving the problem.
A: Video technical support, online service, we can answer you in 24 hours.