China Large Ne Plate Chain Efficient Bucket Elevator for Cement Powder

Introduction:
Bucket elevators are designed to move flowing powders or bulk solids vertically. Bucket elevators use an endless belt or chain and have a series of buckets attached to it. Bulk material is spread into an inlet hopper. Buckets (or cups) dig into the material and convey it up and over the head sprocket/pulley, and then throw the material out a discharge throat.
Bucket elevators are not self-feeding, and are fed at a controlled rate. The buckets are usually where the chain or belt path is vertical or steeply inclined in a single plane. The buckets are returned back down to a tail pulley or sprocket at the bottom.
There are four broad classifications of bucket elevators: centrifugal, continuous, positive, and internal discharge. The most commonly used are the centrifugal and continuous discharge elevators.
Feature:
(1) Wide range of ascension. This kind of elevator has fewer requirements for material's kind, specialty and shape size. Not only can lift the general powder, small granule materials, but also can promote the larger grinding cut materials. Material temperature should lower than 250 °C.
(2) Big carrying ability. Lifting capacity is 15m³/h-800 m³/h.
(3) Low energy consumption. The energy it consumes is 25%-45% of chain elevator.
(4) Long service life. The transmission chain service life is more than 5 years.
(5) High hoisting height. It has low operation speed, stable in operating. Also it applies high plate chain with strength wear-resisting, so it can achieve high hoisting height.
(6) Good sealing, little environmental pollution.
(7) Good operating reliability. Advanced design principle and processing method, ensure the reliability of the machine running.
Overall Dimension Drawing:
Technical Parameters
ModeCapacity(m³/h)Max Paticle size(mm) percentage%50255075100NE15156550403025NE30326075584740NE50609075584740NE100110130105806555NE150170130105806555NE200210170135108570NE300320170135108570NE40038020516512510590NE500470240190145120100NE600600240190145120100NE800800275220165135110
FAQ
Q: Are you a factory ?
A:Yes,we are factory, which was established in 2006.
We focus on providing expert service including design, manufacture, installation & maintenance for the logistic industries & warehouse equipment.
Q: Terms of Payment:
A:30% of the total amount by TT as deposit, the balance to be paid by TT or L/C at sight before the machines leaving seller' factory.
100% irrevocable L/C at sight.
Q:Time for preparation of goods:
A:The above machines shall be ready for delivery during 45 days from the date of receiving the deposit/LC, excluding the time of waiting for shipment. If there is any delay of delivery caused by seller, 3‰ of the total amount shall be paid to buyer each day, but this amount shall not exceed the amount of deposit; if the delay is caused by buyer, 3‰ of the total amount shall be paid to seller each day, but this amount shall not exceed 10% of total value of machines.
Q:Guarantee period:
A:The guarantee period for the above machines is twelve months from the date of putting into use, but not exceeds twenty-four months after the machines leaving seller's factory. It is not applicable for quick wear parts.
Q: May I know the status of my order?
A: Yes. We will send you information and photos at different production stage of your order. Every step will be send to you in time.
Q: Can I customize shelving or racking at my own size?
A: Sure.
Q: If i need the complete mineral processing line. is Baite able to help us build it? A: Yes, we can help you combine a complete mineral processing line. and give you related professional advice as long as you need.
There is a rich experience engineer team of us. we had already build many mining projects in China & Overseas. You can believe our quality and service.
Why Choose us?
1.Pre-sale services: enthusiasm
We provide you with the prophase plan, process flow design and manufacturer equipment according to your special demand.
2.one-year warranty to make sure your machine runs consistently.
We always offering lifelong services and provide spare parts for a long term,and repair main parts under right using for free in two years.
3.Technical services
3.1 Design of production line and solutions according to buyer's requirement.
3.2 In 7 days after the receipt of deposit, the seller shall provide related technical documents for equipment installation, in addition to those with special requirements.
3.3 Before delivery, the seller can modify the previous solutions according to buyer's requirement.
4.After-sales service
4.1 During the installation and commissioning, the seller shall send technician to the site for instruction of installation and commissioning, and for training of workers.
4.2 If there is any equipment failure caused by the buyer, the seller shall assist the maintenance of machines and replacement of fittings, and charges appropriate fees.
4.3 Beyond the guarantee period, the seller can provide services and fittings at a most preferential price.
4.4The seller can provide consultation and inspection services freely for other products, especially for the up-stream and down-stream products of our equipment.
Work Shop View: