China Lead Free N2 Reflow Oven T200N+

T200N+ is not only with lead free welding function, but also with temperature measurement function.
Adjusting temperature curve constantly in order to get better welding in SMT field. Adjusted temperature is very important which is testing temperature by temperature tester. Temperature tester is used to measure temperature, process improvement and data analysis. In addition it can save data. This machine can meet requirements of ISO9001 system greater.
High reliability; Measure actual temperature in real time for pad; Draw temperature chart randomly; The format of temperature report is nice; High cost performance.
T200N+ unique features
1. With all advance of T200N
2. With single channel temperature measurement (multi channels is optical), T200N+ has been the first-class reflow oven. It make up market blank.
3. With heater installation technology which is patent in desk reflow oven, the temperature is more uniformity which is less than 10 degree, it is the highest standard.
4. With air cycle and vent technology which is patent in desk reflow oven, it improve temperature uniformity and air cycle effect.
5. With door drive device which is patent in desk reflow oven to make sure worktable stable when PCB is out, and at the same time it can make chips don't move.
6. With save nitrogen technology. When door is open, nitrogen will close automatically, when door is close, nitrogen will open automatically. It can save nitrogen and reduce cost effectively.
7. With vent smoke function. It is convenient to emitting exhaust gas.
8. With purifying and filtering exhaust gas function
9. With automatic door device. When finishing welding, door will open. With airproof technology, it can improve heat preservation effect and save nitrogen.
T200N+ technology parameters
A: Temperature control segment: 40 segments
The segment can be set in computer according to the actual requirement.
B: Temperature-zone numbers: Single-zone and multi-segment
C: Temperature control system: PC control system, SSR non-contact output
D: Temperature accuracy: ± 2 degree
E: Warm-up time: 3min
F: Temperature range: Room-temperature -360 degree
G: Heating supply: Infrared ray + Hot air convection
H: Effective working table area: 270mm * 220mm
I: Welding time: 3min ± 1min
J Temperature curve: It can be set, adjusted and tested according to the actual requirement.
K: Cooling system: Transverse flow equal cooling
N: Rated voltage: AC single-phase, 220V; 50Hz
O: Rated power: 3.8 KW Mean power: 1.6kw
P: Weight: 65 kg
Q: Dimension: Length*width*height 700* 500*400mm