China Leather Glue Machine Yellow Glue Machine Even Glue Saving

Features:
Uniform gluing, high precision and no leakage.
90W+1:10 gearbox, high strength. Indexable head, easy to use
Specification: 1.5″/4″ /6″ /9″ /12″ (inch)
Description:
It is suitable for belt gluing. It can be freely adjusted to the required width. The sealed type can swing for a long time, will not evaporate, will never solidify, and it is always new as long as there is no need to clean the machine. Fully automatic stepless speed control, the speed can be adjusted freely. Generally, super glue and gasoline glue can be equipped with a rotary device. When stopped, the recyclable glue liquid will never leak, and the amount of glue can be adjusted at will. This machine is used in shoemaking, leather products industry (luggage, wallets, briefcases), stationery industry (notebook, file folders, paper clips), belt factory equipment, and the use of the opposite side, photo frames, sports equipment.
Instructions:
1. Confirm the power supply is 220V and plug it in again
2. Turn the left motor knob to see if the shaft can rotate and confirm if there is dry glue in the roller.
3. only turn the speed adjustment knob to zero before turning on the power switch,
4. Turn on the motor switch, adjust the speed slowly, adjust the thickness knob (not too tight), the speed knob must be reset to zero before turning off the power switch to ensure the safe operation of electrical appliances.
5. Rotate the glue bottle upward and lock it firmly to pour in the right amount of glue.
6. Depending on the thickness of the work piece, adjust the following two flower wheels (rotate in the same direction) to observe the height of the bottom wheel by eye, apply the work piece to the glue and check it once, then adjust the amount of glue according to the need After adjustment, you can work normally. Pay attention to the instructions of the ammeter during use. If the current exceeds 1.5A, it means that the overloaded rubber wheel has a problem and needs to be dealt with.
Tips for leaving get off work:
1. When leaving get off work, please put the glue bottle upside down to make the glue flow back into the bottle, and then let the motor run at a low speed.
2. Put the glue on the rubber wheel to clean it with the glue adjusting knob first, and then clean it while turning with the water and brush. After cleaning, turn the speed regulating knob back.
3. Turn off the motor and then rotate the motor handle by hand while cleaning, so that there is absolutely no glue on the rubber wheel, and the feel is easy.
4. The next time you turn on the machine, first turn the motor handle by hand to see if it is easy. If it is tight, please add the sky water to the rubber wheel. After a few minutes, then turn the motor handle by hand to see if it is feasible.
5. If it is easier to turn on the power at this time, otherwise it is necessary to add more water to make the dilution time longer and try again.

FAQ:
1. Do you have it in stock?
We only have common products in stock but not for the nonstandard products.Because all the products need make based on customers' different requirements.
2. Could you advise to us the design based on our special requirements or based on our object samples?
Of course, we can do. Please tell us your idea or your application.
If you have sample object, send it to us or send detail pictures.
3.How long do you make the order product?
Common products for 7days, big qty and none standard products for 20days.
4. Do you have operating manual?
Of course, we will put it with the goods together.
5. How about the quality?
We have export to many other customers from all over the world, the feed back is good,quality is the first of our company.
6. Could you do OEM?
Yes, of course. We can produce according customers' requirement, just send us your requirements and design of drawing and sample.
7. Could we as your agent?
Of course. We are looking for sole agent in Country who have the willing to cooperate with us for long business term.
8. Payment:100%T/T in advance for small order. 30%T/T in advance as deposit, 70%T/T paid before shipment
9. Delivery?
1-2 units we could send by EXPRESS(DHL, UPS, FEDEX, TNT, EMS), heavy weight more than 50kg,we suggest to use sea freight LCL or by air.
10. Warranty:
One years Warranty with none human damage. After warranty time, factory will repair fix it or send the new parts on cost price. We can produce according customers'requirements, OEM is available, pls send me inquiry for quotations.
Why should you choose us?
GOOD SERVICE:
We will respond to you within 24 hours. We can manufacture nonstandard parts according to your drawings. And we offer best after sale service.
LOW PRICE:
The price of our products is reasonable and competitive than other company.
PERFECT QUALITY:
We have strict quality control from producing to delivery.Our company had strong technology support and online support available. We have cultivated a group of managers who are familiar with product quality , good at modern concept of managemen