SGL-103A series ink is a two-component reactive ink. SGL-103B is a one-component ink. It is over-baked at 180°C-230°C without yellowing. It is specially developed for mobile phone glass lenses that require high-temperature repeated processing and printing. Excellent, good printing adaptability, silk screen printing fine edge, strong adhesion, alcohol resistance, wear resistance, in line with EU ROSH standards, halogen-free standards. The cured film has good physical and chemical resistance, high surfaSensor ce hardness and wear resistance, and good printability.
Application field:
Glass panel lens printing for electronic producChemical Equipment & Machinery ts such as mobile phones and tabletsDrying conditions: 103A with 10% curing agent, baking (150 ° C) 30min, 103B baking (230 ° C) 20minPrinting screen: polyester screen / 165T (380 mesh) or lessDilution solvent: special open oilCleaning screen: 718 washing net waterPrinting area: 25-30m2/KG (120T polyester monofilament, photosensitive adhesive screen)Printing equipment: manual operation, semi-automatic printing machine, pad printing machineTechnical Parameters:Test itemsTest condition methodTesLCD Module t ResultsFiltration Equipment & Parts Adhesion1mm10*10 3M tape stripping100%Pencil hardness45*200g pressure3HAlcohol resistance500g pressure 500 timesqualifiedSolvent resistanceSoaked in toluene 24HrNo changeAcid resistanceSoaked in 5% HCLx24HrSpraying Machinery & Spreading Equipment No changeAlkali resistanceSoaked in 5% NaOH x 24HrNo changeSalt toleranceSoaked in 5% NaCLx24HrNo changeWater resistanceSoaked in tap water x 96HrNo change
* Test substrate: transparent tempered glass* After baking at 150 ° C for 30 min, place it for 24 hours and test again.* The above results are only laboratory test results, only reference data