China Light Steel Structure Poultry Farm Construction for Chicken

Light Steel Poultry Farm Construction for Chicken
I.General Description for chicken house design
1) Generally the height of poultry houses is between 2.5m-3.5m (at eaves). The width of the poultry houses is decided according to then layout of equipment inside and cannot be too large considering ventilation. Steel structure poultry houses are usually designed with the width of 8-15m. Length is better no larger than 150m.
2) In modern chicken farms, chicken feeding is operated in large scale in an automatic way. A complete set of equipment in a poultry house consists of the following items: automatic feeding system, automatic nipple drinking system, exhaust fan, evaporative cooling pad, floor for dung leakage, etc..
II.Main components of steel structure chicken hosue

1. base:Concrete and steel foundation bolts2. Column and beam:material Q345(S355JR)or Q235(S235JR) steel, all bolts connection ,straight cross-section or Variable cross-section3. Bracing:X or V or other type bracing made from angle , round pipe etc.4. Galvanized C or Z purlin:size from C100~C320,Z160~Z3005. Roof and Wall Panel: 1.Single colorful corrugated steel sheet --Thickness:0.12-1.2mm; Width: 310-1150mm, etc.
2.Sandwich panel with EPS, rock wool, glass wool , PU etc.
insulation -- Thickness around 50mm~150mm; Width : 970mm or 950mm6. Vertical and transversal support:Q235 angle steel, round bar or steel pipe.7. wall Wire meshes with curtain system or sandwich panel8. equipment 1.Main feed line system
2.Pan feeding system
3.Nipple drinking system
4.Ventilation system
5.Cooling pad system
6.Spraying system
7.Heating system
8.Environment control system9. life span 50 years 10 packing Standard container package 40 GP or 40 HQ container 11. size Customized 13. Installation on siteAvailable

III.Environment control of poultry house

1. Cooling pad system

Evaporative cooling pad system works in the condition of negative pressure, the cooling pad is installed on one side of the wall, fan installed other side. When air flow through cooling pads, the water evaporation absorbs a lot amount of heat.
The height of cooling pad is 1.5-2.2m, the area of cooling pad in chicken house is about 6-8 times than the fans.


2. ventilating system

The main parts of ventilation system is the big fan and small fan. They are controlled by the control system. The NO. of the fans to run was decided by the temperature of the poultry house.
about 200m2 need 1 big fan and 15-20m need a small fan, this is the standard to design the quantity of fans in chicken house.

3.Chicken breeding equipment on the ground
Performance parameters of feeding and drinking system

(1) High-quality special driving reduction motor. Power: 0.75kw 380voltage

(2) Hopper capacity :100l
Material: Hot-DIP galvanized sheet. Coat120g/m2

(3) Feeding system: Diameter of conveying pipe: Diameter: 45mm
Material: Hot-DIP galvanized sheet pipe r.
Spring auger from South Africa feeding capacity: 450kg/h.
(4) Nipple drinking system consist of water front parts , drinking system ,hanging system ,regulator ,water end parts.
Capacity /nipple :8-12 birds/nipple birds in cage : 12 birds/nipple breeder : 10birds/nipple
4.Chicken layer battery cage euqipment
Feeding systemDiameter of tube is 45 mm ,feed conveying capacity is 450kg/hour . There are 2 feed pans in one unit .Diameter of feed pan is polypropylene diameter of pan is 330mm , with 14 seperations . Each pan can be used for 45~55 birds .
Manure Cleaning system and birds conveying system
Automatic birds conveying system can save labor cost and increase working efficiency . it can also reduce the damage to the birds and improve economic benefits .
Belt manure removal system makes manure drier and easier to to remove and recycle,and heighten the efficiency of reusing manure

Poultry slat :
Slat size : length 900mm , width 700mm, thickness 45mm .hole size :14*11mm
Material: polypropylene . High tensile strength and anti corrosion .

Lighting system
Voltage of Led lighting system 24v ,IP 65 .Strength of illumination 10-35lux . blue or green light can used which are most favorable to broilers .strength of illumination can be adjusted .


IV .Advantages for steel structure house

1) Easy to assemble and disassemble with simple and common tools.
2) Heat and sound insulation, water and fire proofing.
3) Attractive appearance
4) Environmentally friendly and economical . Reasonable design makes it reusable. The reusable character makes it environmentally friendly and economical.
5) Cost efficient -- A grade materials, reasonable price, all investment low requirements for base and short completion time make it cost efficient.
6) Light weight, convenient for shipment and transportation of the steel structure warehouse construction.
7) the components of the house can be used repeatedly



V.Certification :


VI. about us
1.Professional steel structure manufacturer since 2003.
2.Professional poultry equipment manufacturer since 2009
3.2, 0000 sqare meters workshop for steel structure

Common FAQ for our poultry equipment quotation

1. What information you are supposed to provide to get a good price?
a. Chicken farm size (Length*width*height);
b. Quantity of chickens in one farm;
c. Weight of chickens when they're for sale in market;
d. Chicken farm location and local climate condition (temperature, humidity...);

2. payment details:
we can accept T.T ,30% Down payment and the balance Paid by T/T OR L/C before Shipment

3. Delivery time :
20days after deposite

4. what service we can offer :
a.Poultry house design and construction
b.Equipemnt production and installation on site
c.Offer Turn-key farm project construction