China Light Weight Network Audio Cable Tester Hv Cable Test Equipment

PRODUCT: Grewin 640Hz 1280Hz intelligent Cable identifier for cable fault tester

RCI-602R INTELLIGENT CABLE IDENTIFIER RECIEVER:
Large flexible clamp coil :
Along with the low-voltage pulse reflectometry, our systems implement advanced high-voltage pre-location technologies that allow to determine the distance to faults of various types with a minimal harmful effect on the cable lines.High level of safety during the testing with our cable test vans and mobile systems is ensured by built-in protection against overcurrent, overvoltage and overheating, as well as by the use of a continuous grounding monitoring, vehicle door closure sensors and self-health check monitoring.
High speed sample system and high bandwidth input circuit are integrated in the tester to get the exact reflection curve of signal so that the distance of fault point to signal sample point can be calculated in high accuracy and high resolution Special sound location tester configuration can be applied to locate the fault point more exactly.
The cable fault tester is suitable for measuring power cables, high-frequency coaxial cables, local telephone cables, street lamp cables, low-resistance of short-circuit, open-circuit disconnection faults, and various materials of various materials with different cross-sections and different media. Leakage and high resistance flashover faults. A powerful cable management system that automatically generates test reports.
It can test a variety of 35KV under different voltage grade, different sections, different media and all kinds of material of power cable faults, including: open circuit, short circuit, low resistance, high resistance, high resistance leak flashover fault.
It can be any cable length measurement of radio wave propagation in the known speed.It can test the power cables buried path and buried depth.route tracing evaluation of electric lines and cables.
BEFORE USING:
For different countries and zones, we try to offer different user settings for choice.Now the power system frequency and depth measurement unit is optional.
1. Factory setting: default power frequency 50Hz
2. Optional setting as below:
1. GENERAL DEscriptION
1.1 GENERAL :
RCI-602 is a high performance cable identification system.It consists a transmitter and a receiver, can be used to for both running cable and dead cable.
Running cable should be three-core sheath cable and it is high accuracy and easy to use.
1.2 FUNCTION FEATHER:
l Used to for both running cable and dead cable.Running cable should be three-core sheath cable
l 50Hz/60 Hz cable load current measurement function.
l Multiple signal output method: direction connection and clamp coupling
l High power output and adjustable with auto impedance matching and auto protection
l Identification function: to display the identification result directly
l All-digital high accuracy sampling process with narrow receiving transmission bands,high anti-jamming capability to fully inhibit the inference from the nearby running cable and pipe power frequency and harmonic wave.
l Big capacity Li-on batteries series,support auto power off when low battery or long time no operation
l Solid case and light weight easy to carry
1.3 SPECIFICATION:
1.3.1 Transmitter:
l Output: Direct Connection output, Clamp Coupling Output
l Output Frequency:640Hz (complex frequency), 1280Hz (complex frequency).
l Output power: max. 10W, 10 levels adjustable, auto impedance matching.
l Direct connection voltage: max. 150Vpp.
l Overload and short circuit protection.
l HMI: 320x240 LCD.
l Power supply: 4 X built-in 18650 Li-on batteries, standard 7.4V, 6.8Ah.
1.3.2 Receiver:
l Input: soft flexible clamp
l Receiving frequency:
- Active frequency: 640Hz,1280Hz
- Power frequency: 50Hz/60Hz
l Cable identification mode: soft flexible clamp
l Power frequencies measurement: range AC 1-1000A,accuracy +/-3%
l HMI: 800x480 LCD,size 121x76mm
l Built-in battery: 2 X 18650 Li-on batteries, standard 3.7 V,6.8 Ah
1.3.3 Other:
l Volume: transmitter 280x220x90mm,receiver 220x125x55mm
l Weight: transmitter 2.3kgs, receiver 0.9kgs
l Charger:transmitter input AC 100~240V,50/60Hz,output DC8.4V,2A
receiver input AC 100~240V,50/60Hz,output DC 5V,2A
l Temperature: -10-40ºC,humidity 5-90%,elevation <4500m
PRODUCTION AND EXHIBITION :
Company introduction
1.certification
We have passed ISO9001:2015,CE,SGS approval and IEC report

2.Company profile
Tianjin Grewin is concentrating on transformers for 20 Years and complianted by ISO9001:2015,CB,IEC CB,CE etc.We're always pay great attention to its business philosophy "Quality and Honesty First".Grewin is specialized in the design and manufacture of wound components such as transformer,current sensors, chokes etc .windely used in communications,electronics,meters,industrial control,medical equipments and other fields.We are also a provider of power meters and instruments locators. 85% of its products exported to America, Europe, and Asia etc.We sincerely invite you to join us to create a bright future.
3.Terms of Shipment:
Within 10 working days after received related prepayment or L/C.
4.Payment terms:
(1)T/T 100% or 50% deposit by T/T in advance, balance amount to be paid 7 days before
delivery.
(2) By irrevocable L/C at sight, to be issued immediately against confirmed order.
(3)Payment by T/T, if order amount is less than USD 20,000.
5.Warranty:
(1)We provide 1 year warranty.
(2)If the product is defective, please notify us within 3 days of delivery.
(3)All products must be returned on their original condition, in order to qualify for a refund or exchange of goods
6.Why choose us?
Quality and honest first!
A. Flexible service for diffierent transformers with high efficiency performance.
B. Over 40 years experience of transformer designing and producing.
C.100% test of every single product we produce from incoming material checking.
D. UL, CE, ISO9001:2008
E. We offer custom-made transformers, OEM and ODM are welcome
F. We deliver the quality you expect at consistently competitive prices
G.Transformer quality lifetime:10 Years.
H.Specialty Sales service:5 -10 Years
7.Flow chart of trading activities:
NO
Step
Days need
1
Request for quotation
1 day
2
Making quotations
1 day
3
Offer and counter offer
3 days
4
Sending and receiving samples
3-10 days
5
Sample /confirm/iation
3 days
6
Placing a firm order
1 day
7
Paying and receiving the down payment
1-4 day
8
Factory production & Quality inspection
15-20 days
9
Paying and receiving the balance
4 days
10
Delivery of goods
1 days
8.contact
Tianjin Grewin Technology Co.,Ltd.
Web:transformer.en.made-in-china.com
Address: 2# MeiNian Plaza No.16 DongTing Road,Hexi Distr,300222,Tianjin China.