China Light Weight SGS TUV Certificate Panama EPS Panel Wall for Building Mansion Apartment

Light Weight SGS/TUV Certificate Panama EPS Panel Wall for Building/Mansion/Apartment
Information of EPS Panel Wall
The eps sandwich panel uses ordinary portland cement, sand and fly ash or other industrial waste such as water slag, slag, etc. as fine aggregate, and then adds polystyrene particles and a small amount of inorganic chemical additives to cooperate with full automatic high efficiency A special mixing system for forced light aggregates, which introduces air during the mixing process to form a honeycomb-like stable pore in the core layer to further reduce the product bulk density, which not only reduces the material cost, but also achieves the ideal thermal insulation and sound insulation effects. Polystyrene particles and pores are evenly distributed inside the product, so that the concrete forms a circular honeycomb skeleton, which supports each other and increases the pressure resistance. The addition of fly ash not only improves the workability of the concrete slurry, but most importantly, it enhances the strength of the cement in the late stage, thereby enhancing the strength after the product is cured, the flexural strength is increased by 80%, and the modulus of rupture is increased by more than 50%.
Specification of EPS Panel Wall

1).Surface:Fiber reforced calciumsilicon or cement calcium boardSturcture2).Core:Cement, EPS, sand, fly ash 1).Length/;2270/2440mmSize2).Thickness:60/75/90/100/120/150/mm 3).Width:610mmColorgreyApplicationFloor, Roofing, wall,Villa,prefab, building EtcCharacterLightweight, insulation, fireproof, waterproof, fast installation, and environmental etcDelivery time20 days after order /confirm/iedPackagePut a layler of foam cloth between each panel, use hard paper to protect angles, use roll whole pallet with thin film, OEM is welcome.

Feature of EPS Panel Wall

FeaturesMore detail 1Green100% free of harmful substances and are of A non-radioactive products, standard GB6566-2001.2Ightweight economicThe volume-weight only 750-800kg/m3 , the weight of 75mm thickness ZJT board is 60kg/m2, equal to 1/6 of brick weight, 1/7 of 120mm thickness masonry.3Increase valid spaceThe thickness of ZJT wall decreases 85mm by using 75mm thickness ZJT boards.Thus, valid space increases 1/m2 per 11.8mm.In other words, it can increase 6/m2 per 100/m2 .4Moistureproof waterproofWill keep dry and leave no stains.During humid days, the boards will not condense water either.Suitable to be installed in such wet areas as kitchens, bath rooms, basements because of its moistureproof and waterproof.5FireproofFireproof limit of ZJT boards is more than 4 hours and does not emit toxic gases under 1000 degree.The nonflammable performance reaches national A-class standard.6Heat insulationZJT board is composed of special material to keep heat and thermal within a favorable condition.At same time, the ZJT boards are able to adjust moisture automatically and keep moisture at a balance level.7Sound insulationThe raw materials of ZJT boards have good performance in sound insulation.ZJT board with 90mm thickness gains sound insulation of 42dB.8Walls can be nailed and groovedZJT board can be grooved to have conductor arrangement or nailed to hang heavy object.The surface of ZJT board is smooth enough to make finisher processing directly with tile, wall trim and so on.9Good integrationBy using steels at the joints, the strength of walls is high enough to do partition in large story height and long span structures and it anti-seismic performance is several times higher than masonry.10Easy and fast constructionIt can be cut to adjust length and width at will.The process of installation is easy and fast, without the need of plastering.

Contact: