China Lightweight Fire Rated Quakeproof Partition Wall Panel Concrete Wall Board AAC Alc Wall Board

Lightweight Fire Rated Quakeproof Partition Wall Panel Concrete Wall Board/AAC/ALC Wall Board for Apartment Building/Block/Mansion/Office Building
1.ZJT EPS Cement Sandwich Panel

1).ZJT EPS Sandwich Panel

EPS sandwich panel is a new generation of high-performance wall panels produced by industrialization. It is composed of a variety of raw materials such as portland cement, sand and fly ash and replaces traditional bricks and hollow blocks. It has the advantages of environmental protection, energy saving and pollution-free, lightweight earthquake resistance, fire prevention, heat insulation, sound insulation and fast construction.
EPS sandwich panel has its own three-in-one structure, which has light weight and high strength. It adopts assembly construction. The wall panel is interlocked with the wall panel to form a whole, and its impact resistance is better than ordinary masonry. It is anchored by the steel member method. Riveted to structural columns and beams, the overall performance is stable, the net load of the building can be reduced, and it can be fixed on the structure to improve the structural safety factor of the building, which can effectively prevent earthquakes and never collapse.
According to statistics, the use of lightweight sandwich panel materials can save about 30% of the total cost of construction, and the plate wall can at least increase construction efficiency by more than 3 times than the wall of blocks and bricks.

2).Product Composition

Surface :fiber cement board/calcium silicate board
Interior filling materials: EPS / cement / fly ash / sand / additive

3).Parameter and Index

ItemParameter and Index 60mm75mm90mm100mm120mm150mm1Anti-impact capacity/times≥5≥5≥5≥5≥5≥52Anti-bending damage load/times over deadweight≥3.0≥3.0≥3.0≥3.0≥5.0≥5.03Compressive strength/Mpa≥3.5≥3.5≥3.5≥3.5≥3.5≥3.54Softening coefficient≥0.8≥0.8≥0.8≥0.8≥0.8≥0.85Surface density(kg/m2)≤70≤70≤90≤90≤110≤1106Moisture rate(%)≤10≤10≤10≤10≤8≤87Dring shrinkage value(mm/m)≤0.5≤0.5≤0.5≤0.5≤0.5≤0.58Hang force(N)≥1000≥1000≥1000≥1000≥1000≥10009Sound insulation capacity in the air(dB)≥35≥35≥40≥40≥45≥5010Fire endurance(h)≥1.5≥1.5≥2.5≥2.5≥3.0≥4.511Heat transfer coefficient(w/m2.k)≤2.0≤2.0≤2.0≤2.0≤2.0≤2.012Inner radiation index≤1 ≤1 ≤1 ≤1 ≤1 ≤1 13Outer radiation index≤1 ≤1 ≤1 ≤1 ≤1 ≤1 14Frost resistance(shall show no visible cracks and surface without change)__shall show no visible cracks and surface without change15The combustion properties(A1 or A2)__A1 or A2

4).Advantages

1. Safety and environmental protection.
Unlike those natural stones that emit harmful gases such as radon, which are not good for human health, the raw materials used for the lightweight energy-saving wall materials of polystyrene particle sandwich panels are 100% free of harmful substances and not radioactive. So it is very safe and environmentally friendly.
2. Superior fire performance.
The outer material calcium silicate board itself is a cement-based board. Its fire and moisture resistance performance is superior, and the lightweight core material can also have a fire resistance limit of more than 4 hours at a high temperature of 1000 degrees Celsius, while not emitting toxic. Gas, the overall non-combustibility is above the national level A standard.
3. The thickness is small, which increases the indoor use area.
Polystyrene particle sandwich panel energy-saving wall materials generally use 75mm wall material compared with 120 brick wall thickness is 45mm less, that is to say, the use of energy-saving lightweight wallboard, every 22m, can increase the area of 1 square meters. For a 2-storey 200m2 villa, it can increase the use area by at least 6m2 compared to the brick wall, which is equivalent to a large bathroom!
4. Assembly construction, good integrity.
Because it is assembled construction, it has a three-in-one structure. The board is connected to the board as a whole, and the impact resistance is 1.5 times that of ordinary masonry. The structure of the polystyrene particle sandwich panel is compact and does not deform. High strength, the overall seismic performance is many times higher than ordinary masonry walls!
5. Moisture proof, waterproof and soundproof.
Experiments have proved that the polystyrene particle sandwich panel can be cemented into a pool filled with water without any waterproof finish, and the back of the wall can be kept dry without leaving traces or in wet weather Condensation drops appear. Can be used in wet areas such as kitchens, bathrooms, and basements. In addition, the cement fibers on the surface of the polystyrene particle sandwich panel and its internal materials have good sound insulation effects.
6. Thermal insulation
The composition material of the polystyrene particle sandwich panel has good heat insulation function, and the composite plate with the same thickness is more than 10 times the heat insulation capacity of the brick wall! Can make indoor ambient temperature more comfortable.
7. Can be nailed.
The polystyrene particle sandwich panel can be directly nailed or expanded with bolts to hang heavy objects, such as air conditioners, with a single-point hanging force of more than 45kg; and the panel surface of the wall panel is flat and smooth without dust, and can be directly pasted Tiles, wallpaper, wood veneer and other materials for finishing.
8. Light weight and fast construction speed.
The density of the 75mm thick polystyrene particle sandwich panel is only 45kg / m2, which is equivalent to 1/7 of the weight of a 120mm thick masonry. Two workers can easily move a board, the construction is simple and convenient, and three workers can complete it in 4 days The wall installation of a 200m2 house has saved a lot of labor costs. Overall, the cost of housing has been greatly reduced.

2.Specification and Application

Length2270mm, 2440mmWidth610mmThickness60mm75mm90mm100mm120mm150mmWeight40KG/m254KG/m260KG/m267KG/m274KG/m2107KG/m2Partitionroofroofinterior wallinterior wallexterior wall floorexterior wall

3.Installation
Please refer to video below:
https://www.youtube.com/watch?v=4GxKBcxGFXY&feature=youtu.be
4.Packaging and Loading

1).Packing
Held by wooden Pallet or without Pallet;
Bonded with plastic belts;
Fasten around the corners;
2).Loading

Specification(mm)Load by 20'GP(m2)Load in 40'GP(m2)Specification(mm)Load in 20'GP(m2)Load in 40'GP(m2)2270*610*604336072440*610*603576352270*610*753495002440*610*753045232270*610*902873932440*610*902504112270*610*1002623572440*610*1002143732270*610*1202243212440*610*1201613362270*610*1501742502440*610*150116261

5.about Us

XIAMEN ZHonGJIGNTAI BUILDING MATERIALS CO.,LTD
Adress:Unit 2A, Lianchang Building, NO.6-8 Huli Avenue, Huli District, Xiamen, China
Website: http:// www.sandwich-wall-panel.com

ZJT Factory

6.Contact Us
Freda
Xiamen ZhongJingTai Building Materials Co,. Ltd
Website: http:// www.zhongjingtai.com