China Lightweight Flame Retardant Fire Protection Suit Also Call Heat Isolation Clothing

The main parameters

Main temperature resistance: It can reflect up to 90% of the radiant heat.
(1) Close to 300 ºC high temperature can be up to 1 hour;
(2) 500 ºC high temperature can be up to 30 minutes;
(3) When the temperature of 800 ºC is apart from the fire source 1.75 m garment within 2 minutes the inner surface temperature is not more than 25 ºC;
(4) Instantly close to 1000 ºC high temperature environment.
Flame retardant performance: the damage length is less than 10cm, the reburning time is less than 2s, and there is no melting and dropping phenomenon.
Peel strength: greater than or equal to 90N/30mm.
Breaking strength: greater than or equal to 650N
Static water pressure resistance: static water pressure is greater than 17KPa
Rigid attachments high-temperature performance: under the condition of the temperature of 260 ºC, keep the original function after 5 min.

SizeWeight(cm)Chest(cm)S165--17084--92M170--17592--100L175--180 100--108XL180--185108--116XXL185--190 116--124XXXL190--195 124--132

Preparation and inspection before use:

The inspection includes: Whether there is any breakage, dissociation, aluminum foil shedding, wire opening and other phenomena on the garment surface; Whether the fitting of all parts of clothing is in place, firm and reliable; Whether the zipper and buttons are smooth and flexible, whether the suspenders are elastic, and whether the fasteners are intact and reliable; Whether the view of heat insulation hood is clear.

Maintenance

Heat insulation suit after use if dirty to scrub, should dip in with soft brush neutral detergents, scrub the surface residual dirt, and then rinse off with clear water, suspension natural dry in ventilated place, it is strictly prohibited soaked with water and hammer. When drying, baking are forbidden.

Storage

1. The packaging of the heat insulation suit is package-style, with one package for each set of clothes. When opened, the whole box can be stored on the shelf 20cm above the ground according to the original state of the factory to prevent damp and dirty.
2. The heat insulation suit shall be stored in the warehouse, and shall be ventilated and stacked regularly according to the situation of the warehouse, if necessary, airing and drying to prevent the occurrence of aluminum foil falling off, layer separation, mildew and moth.
3. Open the bag once every three months to check whether the clothes are damaged due to storage reasons;
4. During storage and movement, clothing should avoid non-hard and sharp material contact and avoid scratches and damages.
5. Storage period: two years.