China Lightweight Foam Concrete Bricks

fireproof lightweight foam concrete bricks
EPS (Expanded polystyrene board) wall Panel is composed of exterior panels and interior core filling, to form a non-load-bearing light-weight composite wall panel. The exterior panels on both sides are 5mm calcium silicate board, and the middle core is filled with polystyrene beads & cement or ceramsite, polystyrene beads & cement. Lightweight with volume weight of 600-800kg/m3. The 90mm weight 63kg/m2, the weight's only 1/3-1/5 of "120mm bricks and walls plastered on double sides:
If constructions applies light-weight wall panel at the beginning, it can reduce structure and basic cost greatly, it can also optimize the structure beams, rationalize the overakk layout and improve application function. Moreover with the advantages of increasing the usable area and quick construction, the economica effectiveness will be better.
Surface: Fiber cement board
Interior filling materials: EPS / cement / fly ash / sand / additive
Length: 2270/2440mm
Thickness: 60/75/90/100/120/150/180mm
Width: 610mm
ZJT EPS concrete panels combines the construction ease of concrete with thermal and hydro insulation properties of EPS and can be used for a various range of application where lighther loads or thermal insulation or both are desired.
The EPS panel is composed of a 5mm calcium silicate board facing with a core of concrete and EPS (Expanded polystrene).
Some other advantages of building system using our panelDurable- Fire resistant, the panel can resist fire for about 4 hours under 1000ºCEnergy Efficient-Greatly reduced cooling/heating costsEasily constructied-lightweight buillding materials means reduced foundation depth and reinforcement as well as labour hours cost.Pest/termite/rodent resistant-Resistant to rot and moudleLocal manufacturing, mass produced to exacting tolerancesAesthetically pleasing-very flexible design, it can be used for anything from simple to complex structures.

ItemParameter Index Specifications60mm75mm90mm100mm120mm150mm1Anti-impact capacity/times≥5≥5≥5≥5≥5≥52Anti-bending damage load/times over deadweight≥3.0≥3.0≥3.0≥3.0≥5.0≥5.03Compressive strength/Mpa≥3.5≥3.5≥3.5≥3.5≥3.5≥3.54Softening coefficient≥0.8≥0.8≥0.8≥0.8≥0.8≥0.85Surface density(kg/m²)≤70≤70≤90≤90≤110≤1106Moisture rate(%)≤10≤10≤10≤10≤8≤87Dring shrinkage value(mm/m)≤0.5≤0.5≤0.5≤0.5≤0.5≤0.58Hang force(N)≥1000≥1000≥1000≥1000≥1000≥10009Sound insulation capacity in the air(dB)≥35≥35≥40≥40≥45≥5010Fire endurance(h)≥1.5≥1.5≥2.5≥2.5≥3.0≥4.511Heat transfer coefficient(w/m².k)≤2.0≤2.0≤2.0≤2.0≤2.0≤2.012Inner radiation index≤1 ≤1 ≤1 ≤1 ≤1 ≤1 13Outer radiation index≤1 ≤1 ≤1 ≤1 ≤1 ≤1 14Frost resistance(shall show no visible cracks and surface without change)__shall show no visible cracks and surface without change15The combustion properties(A1 or A2)__A1 or A2

Thickness(mm)Fire endurance(H)60≥275≥390≥3.5100≥4120≥4.5150≥5

The surface is calcium silicate board,waterproof and moistureproof

Materials and the interlocking concave-convex groove make it soundproof

ItemUnit60mm75mm90mm100mm120mm150mmSound insulation capacityDB≥35≥40≥40≥45≥50≥55

ItemUnit60mm75mm90mm100mm120mm150mmAnti-bending damage loadTimes of self-weight≥5≥5≥5≥7≥8≥9Compression strengthMpa≥4.2≥4.2≥4.8≥4.8≥5.14≥5.14Anti-impact strengthTimes of self-weight≥5.0≥5.0≥5.0≥5.0≥5.0≥5.0Load capacityN≥1000≥1000≥1000≥1000≥1000≥1000

In todat's market, time plays a major role and may be a deal breaker for construction companies and the developers. A lot of project failed to sustain the expected return of investments due to failure in finishing the project on time. However, our product, compared to the traditional block work building system, can be delivered to the site, installed and painted 5 times faster.
On a big project scale, 40%-60% of time spent on assembing, fixing, plastering and painting the blocks will be reduced. In other words, it will not exist which take us directy to the second advantage which is cost saving.

Rapid construction

Tongue and groove jointing system allows faster construction.

2 factory cured panels eliminates need for on-site curing.

3. lightweight panels allow easy handling and erection. 4

easy workability no special tools required

Benefits for builders

1 Substantial discounts on builders risk insurance.

2. noncombustible

3. easy material selection-no need to cull or sort the pile and small punch list.

4. Saves job -site time with ease of panelization off-site

5.straight walls and square corners

6. Windows abd diirs ioeb abd close as they should

7. price stability-price spikers are extremely rare

Benefits for customers

1. High strength results in safer structures less maintenance and slower aging of structure.

2. fire safety

3. not Vulnerable to termites

4. Not Vulnerable to any type of fungi or organism including mold

5. Less probability of foundation problems-less weight

6. less probablity of damage in an earthquake

7. lighter structure with stronger connections results in less seismic force

8. less probaility of damage in high winds

(1) Can replace construction materials such as red brick, concrete block, wire spatial grid structure

perlite board, perlite porous board and etc.

(2)For interior and exterior wall on steel or concrete structure building

(3)It can widely be applied to wall materials of various high and low buildings such as hotel,

apartment, tower, mall, bank, office building, hospital,school, villa, old house

reconstruction, residence and workshop, etc.

.Private housing
.Skyscrapers
.Buildings
.Commercial units
.Building externsions
.Boundary walls
.Interior decorative walls
.Skyscrapers
.Labour accommdations
.Warehouse
.House externsions
,Partitioning
.Exterior Landscape walls

ZJT Sandwich Panel Applications1).Floor Application ZJT light weight compound sandwich panel can be innovatively used as floor board. This system has the outstanding advantages such as hight load-bearing capacity, anti-static electricity, friction resistance, high strength, convenient for wire groove and water pipe inbuilt, corrosion resistance, no deformation, no split, etc., which is much suitable for the fields including the floor plate of additional top floor, factory, workshop, warehouse, etc.
2).Villa&Exterior Wall Application Light weight compound sandwich panel can automatically adjust indoor air and water content with the season and climate changes, and such ecology effect just goes with the tide of modern residential building.
3).Interior Partition Application Light weight compound sandwich board have been widely applying to the special positions like partition panel of high-rise and mega-high-rise buildings.
4).Roof Application Light weight compound sandwich panel roof system brings brand-new added value and application idea to the traditional roof construction. Its easy construction time brings out its hight integrated performance.
5).Pipe/Fire Well/Equipment Partition Application ZJT light weight energy-saving sandwich wall panel has features of lightweight , easy cutting,dry used,and easy installation.It is the most suitable wall panel for pipe well, air sharft, fire well ,equipment partition and room partition wall.

1). Free packing, normal pallet + packing belt
2). Standard exporting packing, good pallet+pearl wool+corner protective paper+packing belt+plastic thin film
3). Loading: Normally 18 pallets per 20' container or according to clients' requirements

Items(mm) Length*Width*Thickness

single(Pc)

Load by 20'GP

m3

Kg/pc

kg/2

Qty(pc)

m2

Tons

2270*610*75

0.10

65

52

252

349

17

2270*610*90

0.12

73

60

216

299

17

2270*610*100

0.14

79

65

198

274

17

2270*610*120

0.17

90

74

162

224

16

2270*610*150

0.21

106

88

126

174

15

2270*610*180

0.25

123

102

108

150

14

2440*610*120

0.18

95

69

132

196

14

2440*610*150

0.22

112

76

102

152

12

2440*610*180

0.27

130

88

90

134

13

Xiamen Zhongjingtai Building Materials Co., Ltd, a professional high-tech research and development company, specializes in producing new energy-saving wall materials, machinery and equipment development, technology production and promotion of product applications. The company is situated in the charming city--Xiamen, with the convenience of water and land transportation and only ten minutes from the airport. We respond positively to the national policy on wall reforming. We have successfully developed wall panels that meet the energy saving needs of modern architecture. And we can produce more than 2 million square meters of various wall materials annually.

Sales: zoe zeng
Website: Http://www.sandwich-wall-panel.com
RFQ
Q: How long can you delivery the goods?
A: Usual order can delivery in 5-15 days upon receiving deposit payment
Urgent order can be speed production to meet client requirement
Large order can further discuss

Q: Can you offer a sample for testing?
A: Of course, we can offer a free small sample depend on your request

Q: Do you have any certificates or qualifications?
A: Yes. We have passed SGS&TUV& CE & ISO, and a full set of wall panel performance testing report, including Thermal Insulation, Soundproof, Strength testing, Fireproof (performance of our sandwich panel is more than 4 hours in the heat of 1000ºC.)

Q: What are the disadvantages of your sandwich panel?
A: Our panel is non-load bearing wall panel, so when building several floors of high-rise buildings, must combine with steel structure or concrete structure.

Q: When the time goes by. whether the panel might damage due to climate change and whether it can be harmed by insects?
A: Our panel will not be damaged due to the climate change, and also will not be harmed by insects. But for more than 2 stories or high-rise building, this panel needs to combine with steel structures or concrete structures. And lifespan is about 50~70 years.

Q: How would you guaranty the quality of your products and would like to know whether a warranty is available for the products we are to order?
A: The physical property of this panel will not be changed with the time goes by, generally speaking, it may be damaged during transport or improper use or man-made damage.

Q: What is your recommendation on usage (for what kind of construction each panel can be used in accordance with the thickness)?
A: Roof: 60mm panel
Interior Wall: 60mm 75mm, 90mm, 100mm
Exterior Wall: 100mm, 120mm,150mm etc
(Remarks: Just for your reference. Upon different client requirement, different practice.)

Q: What is the thickness of calcium silicate board independently?
A: Thickness of face board ( calcium silicon board or fiber cement board) is about 5mm.