Product overview
PCM401 flameproof pressure transmitter adopts high-performance piezoresistive silicon oil-filled pressure sensor as pressure sensitive core. Through internal ASIC, the millivolt signal of sensor is transmitted into standard long-distance transmission current signal. PCM401 can be directly connected with computer interface card, control instruments, intelligent meters or PLC conveniently. The series of products are widely used in industrial process control, petroleum, chemical, metallurgical and other industries.
The product complies with the regulations of GB3836.1-2010 "Explosive Environment Part 1: General Requirements for Equipments" and GB3836.2-2010 "Explosive Environment Part 2: Equipments Protected by Flameproof Enclosure 'd'". Explosion-proof mark Exd II B T6 applies to factories with flammable gas of II A, II B grade, T1-T6 group or environment with explosive mixture of steam and air.
Flameproof pressure transmitters operate normally at the following altitude, ambient air temperature and ambient relative humidity: altitude not exceeding 2000m; ambient air temperature -10ºC~+60ºC; relative humidity of 90% (+25ºC).
Features
Diffused piezoresistive silicon pressure sensor
Strong and well-sealed aluminum alloy junction box, convenient for outdoor installation and use
For gas, liquid and steam pressure measurement
Provide low, medium and high pressure ranges
LCD option
Isolation and explosion-proof
Applications
Industrial site control
Coal mine
Oilfield
Heavy Industry
Chemicals
Gas network
Water supply network
Performance parameters
Pressure range-0.1MPa…0~0.01MPa…100MPaPressure referenceGauge pressure, Absolute pressure, Sealed gauge pressureSupply & output4~20mA (18~36V)4~20mA with display (12~36V)1~5V, 0~5V, 0.5~4.5V, 0~10V (12~32V)Operating temp.-20ºC~85ºCMedium temp.-20ºC~85ºCStorage temp.-40ºC~125ºCZero temp. coefficient±1.5%FS (@-20ºC~85ºC)Span temp. coefficient±1.5%FS (@-20ºC~85ºC)Overpressure150%FS~300%FSMechanical vibration20g (20~5000HZ)Shock100g (11ms)Accuracy0.5Insulation100MΩ/250VDCResponse time≤1ms (Up to 90%FS)Long term stability±0.2%FS/Year ProtectionIP65Ex-proofExd II BT6MaterialLow copper aluminum alloy for housing; 316L for isolation diaphragmMedium compatibilityAll media compatible with stainless steel 316L
Structure
Wiring method
Pressure port
Flameproof parameters
Safety barrier parameters should meet: CO≤35V, IO≤35mA
Transmitter internal parameters: C1=0.01uF, L1=0
The distribution parameters of the connecting cable between safety barrier and the transmitter should meet: Cp≤Co-Ci, Lp≤Lo-Li
Note:
Uo: Maximum open circuit voltage of safety barrier
Io: Maximum short circuit current of safety barrier
Co: Maximum allowable capacitance outside the safety barrier
Lo: Maximum allowable inductance outside the safety barrier
Cp: Maximum allowable distributed capacitance of connecting cable
Lp: Maximum allowable distributed inductance of connecting cable
Ci: Maximum capacitance inside the transmitter
Li: Maximum inductance inside the transmitter
Pressure range selection
Pressure range codePressure referencePressure rangeOverpressureBurst pressureRemark10kGG0~10kPa300%FS600%FS 20kGG0~20kPa300%FS600%FS 35kGG0~35kPa300%FS600%FS 70kGG0~70kPa300%FS600%FS 100kGG0~100kPa200%FS500%FS 160kGG0~160kPa200%FS500%FS 250kGG0~250kPa200%FS500%FS 400kGG0~400kPa200%FS500%FS 600kGG0~600kPa200%FS500%FS 1MGG0~1MPa200%FS500%FS 100kAA0~100kPa200%FS500%FS 160kAA0~160kPa200%FS500%FS 250kAA0~250kPa200%FS500%FS 400kAA0~400kPa200%FS500%FS 600kAA0~600kPa200%FS500%FS 1MAA0~1MPa200%FS500%FS 1.6MSS0~1.6MPa200%FS500%FS 2.5MSS0~2.5MPa200%FS500%FS 6MSS0~6MPa200%FS400%FS 10MSS0~10MPa200%FS400%FS 16MSS0~16MPa200%FS400%FS 25MSS0~25MPa150%FS400%FS 40MSS0~40MPa150%FS300%FS 60MSS0~60MPa150%FS300%FS 100MSS0~100MPa150%FS300%FS
Note: G stands for gauge pressure, A, absolute pressure, S, sealed gauge pressure.
How to order
Example: PCM401-100kGB1C2J13
Refer to product model PCM401, with pressure range 0~100kPa,pressure reference gauge pressure,output signal 4~20mA with display, pressure port G1/2, electrical connection M20x1.5 Female, and flameproof housing with display.
Ordering tips:Display has LED and LCD types. Please specify in the order.For special requirements on the product appearance and performance parameters, customization is available.