Long Range RF Remote Control Receiver
VoltageDC/AC 12V 24VFrequency433.92MHzModulationASKDecoderHCS301 ROLLING CODE
CONNECTION:
J1: Electrical source input
J2: Channel 2, lock option, it's in lock state when short circuit(defaulted)
J3: Learning button, short press it(Note: You can only learn one remote by one press. ) and LED2 lights, twice press the original remote, LED2 extinct,
Learning code succeeds. Remove original code: Press J3 for 8 seconds and then release, LED 2 flashes 4 times, this is indicates the code has been removed.
LED1: State indicator, it'll light when receiving same signal or same signal or same manufacture code.
1N1/OUT1: Input and output of channel1.
1N2/OUT2: Input and output of channel 2.
Antenna: In order to receiver better signal, please pull out the antenna, and keep at least 5cm away from metal object.
OPERATION:
1. Short press the first button of the remote, the first channel of the receiver will transmit signals for one second; If you keep pressing the button, the receiver will keep transmitting signals until you release the button.
2. A. When J2 is in unlock state: Short press the second button of the remote, the second.
Channel of the receiver will transmit signals for one second, if you keep pressing the button, .
The receiver will keep transmitting signals until you release the button.
B. When J2 is in lock state(short circuit): Short press the second button of the remote, the second channel of the receiver will keep transmitting signals; Short press again to stop it.