China Long Range RFID Reader for Car Park Management System

Our RFID reader, semi-passive directional long-range reading system, is the latest development of the new generation card reading systems. It is the revolutionary upgraded products for the car parking management system and ETC system. It breaks the traditionally reading mode and develops its own special working mode: Directional long-range reading as its characteristic, convenient and practical as its breakthrough, strict orientation, high penetration, strong anti-interference and long battery life. It fundamentally solves the actual application problem, e. G. Inconvenience of scanning cards.
Adopting high technology, remote directional module and RFID technology, the RFID reading system can automatically open the gate barrier from a long distance. Put the active tag on the car's windshield, the system can receive the signal at around 3-15 meters away from the gate barrier (The distance is adjustable according to the environment ). It greatly solvess the problems of waiting in queue to roll down the window and scan the card. It not only reduces the unnecessary fuel consumption (each vehicle can save 60 liters every year ), but also solves the traffic problems. Besides, our active tag is usually dormant until it goes into the reading zone. With ultra-low emission of milliwatt power and below internationally accepted radiation limits, it let us enjoy a healthy and modern high-tech environment.
Main Features
Long range reading function: Induction distance is more than 15 meters;
Orientation recognition function: 60 degree Orientation recognition function without any interference;
High vehicle access speed: Vehicle access speed is more than 40KM/H;
Authorized management function: Cards are Authorized by specific card issuer; There is no limitation to the card quantity;
Identification& verification function: Verify the data after reading the card;
Relay output function: After the card verification, the reader outputs the signal for the relay to open the gate.
Power Supply: DC12V/3A
Communication Interface: RS485, VG26, VG34
Receiving Frequency: 433MHZ
Reading Area: 60 degree conical area
Barrier Control: Relay can control barrier directly
Reading Distance: 3 to 15 adjustable
Working Temperature/Humidity: -30 to +80 degree/ 10% to 90%
Pole Specification: ø 60MM*1500MM/ telescopic pole optional
Dimension: 255*245*60MM
Appearance Process: Use outdoor powder, electrostatic spraying

Power Supply DC12V/3ACommunication Interface RS485,VG26,VG34Receiving Frequency 433MHZReading Area 60 degree conical areaBarrier Control relay can control barrier directlyReading Distance 3 to 15 adjustableWorking Temperature/Humidity -30 to +80 degree/ 10% to 90%Pole Specification ø60MM*1500MM/ telescopic pole optional Dimension255*245*60MM Appearance ProcessUse outdoor powder, electrostatic spraying