China Low Cost Gas Liquid Level Flow Differential Pressure Transmitter 4-20mA PCM610

PCM610 Piezoresistive Silicon Differential Pressure Transmitter

Product overview
PCM610 Differential Pressure Transmitter is assembled using an OEM piezoresistive silicon differential pressure sensor filled with oil. The shell is made of stainless steel and has strong corrosion resistance. The two pressure ports are threaded and can be mounted directly on the measuring pipe or connected through the pressure pipe.
PCM610 series have standard voltage/current output options, which can be easily installed and used. The products are widely used in the measurement and control of differential pressure, liquid level and flow in process control, aviation, aerospace, automotive, medical equipment, HVAC, etc.
Features
316L stainless steel diaphragm structure
Differential pressure measurement
Easy to install
Zero and full scale span adjustable externally
Short circuit protection and reverse polarity protection
Excellent shock resistance, vibration resistance and electromagnetic compatibility resistance
Customization available
Applications
Equipment support
Scientific experiment
Precision instrument
Water supply and drainage
Power plant differential pressure
Flow
Notes:
1 Do not touch the diaphragm with hard objects, which may cause damage to the diaphragm.
2 It is recommended to install three-valve manifold when using this product.

Performance parameters
Pressure range0~10kPa…2.5MPaStatic pressure20MPa(Max.)Pressure referenceDifferential pressureSupply & output4~20mA(16~36VDC)
1~5V, 0~5V(12~36VDC)Accuracy0.5%FS(typ.)Temp. drift1.5%FS(@-10ºC~70ºC)Response time1ms(Up to 90%FS)Service life≥10x106 pressure cyclesAmbient temp.-10ºC~70ºCMedium temp.-10ºC~70ºCStorage temp.-40ºC~125ºCEMC-interferenceIEC 61000-6-3EMC-immunityIEC 61000-6-2Insulation resistance200MΩ/250VDCShock resistance100g(11ms)ProtectionIP65Material304Max. mounting torque25Nm

Structure

Pressure port

Note: Torque depends on various factors such as material of gasket, supporting materials, lubrication of thread and pressure.

Pressure range selection
Pressure range codePressure rangePositive overpressureNegative overpressureRemark10k0~10kPa300%FS300%FS 20k0~20kPa300%FS300%FS 35k0~35kPa300%FS300%FS 70k0~70kPa300%FS300%FS 100k0~100kPa300%FS300%FS 200k0~200kPa300%FS300%FS 250k0~250kPa200%FS200%FS 500k0~500kPa200%FS200%FS 0.6M0~0.6MPa200%FS200%FS 1M0~1MPa200%FS150%FS 1.6M0~1.6MPa200%FS150%FS 2.5M0~2.5MPa200%FS150%FS

Accessory

How to order

Example: PCM610-35kB1C3J5
Refer to product model PCM610, with pressure range 0~35kPa, supply 24V, output signal 4~20mA, pressure port G1/4, electrical connection DIN43650.
Ordering tips:Ensure compatibility between measured media and contacting part of product.For special requirements on the appearance and performance parameters, customization is available.