China Low Energy China Quality Spin Flash Dryer

Description:
Spin Flash Dryer is continuous drying equipment specially designed for shaped cake, cream paste, paste slurry materials. Clean heat medium goes into the drying room from the tangent direction, form a strong rotary vortex air current together with mechanical mixer. Wet material has been added to the drying room in a fix quantity, and stir in the vortex of air currents were crushed under dry.
Work Principle:
The hot air enters into the bottom of the dryer in tangent direction. Under the driving of the stirrer, a powerful rotating wind area is formed. The paste state materials enter into the dryer through the s crew charger. Under the powerful function effect of stirring at high-speed roation, the materials are distributed under the function of s trike, friction and shearing force. The block state materials will soon be smashed and contact the hot air fully and the materials are heated and dried. The dried materials after the de-watering will go up with the hot-air flow.
Product Character:
Drying viscous materials: The lower part of the drier is cone structure with a broken device together with the washing of wall by the air flow, which can handle a certain viscous materials.
Drying heat-sensitive materials: Due to the short drying time, the relative speed of the materials and the hot air is large, and the hottest air not direct contact with the dried material.
Drying strength: The materials in the drying process have been broken, scoured, impacted, that increasing the surface area. At the same time, the hottest air hasn't direct contact with the dried materials; therefore the inlet temperature can be higher than the melting point of materials.
Effective controlling of the moisture and end fineness of the materials: Through the inside settings of the drier (swirl films, elutriate ring or screener), and coordinating with the inlet air temperature, can effectively controlled the moisture and end fineness of the materials.
The best power matching: According to the material properties (density, bulk density, viscosity, fineness, original moisture content, residual moisture content, angle of repose, etc.), matching fans, blender, feeder, etc, so that matching the best power.
Product delivery:
Material to be dried:
Inorganic: cryolite, ultra-fine calcium carbonate, tellurium dioxide, manganese dioxide, sodium fluoride, kaolin, zirconium silicate, salt, borax, sodium sulfate, precipitated calcium carbonate , sodium thiosulfate, zinc sulfide, sulfate, cuprous chloride, calcium hypochlorite, boric acid, borax, hydroxide, light magnesium carbonate.
Organic: 1-amino-anthraquinone, benzoic acid, sodium oxalate, long-chain dicarboxylic acid, lead acetate, hydroquinone, anthraquinone, sodium dichloroisocyanurate.
2 inter-stupid A nitrile, o-methyl benzoic acid, calcium citrate, sodium trichloroisocyanuric acid, sodium salicylate,
3 - Acid, DSD Acid, H Acid, J Acid, R Acid, T acid, Y acid , acetanilide.
Polymers: PE, powdered styrene-butadiene rubber, sulfonated phenolic resins, polyvinyl chloride resins, polyvinyl acetate.
Dyes and Pigments: indigo, lead chromate, strontium chromate, Reactive Brilliant Blue KN-R, Li Saul red, yellow alkaline, medium black, lemon yellow, acid black 10B, Mordant black T, phthalocyanine blue, iron oxide black,
Medicine: Amidopyrine, protein powder, nucleotide, guanosine.
Pesticides: atrazine, Abamectin, Bataan, chlorothalonil, mefenacet pyridaben, imidacloprid, glyphosate, mancozeb, paclobutrazol, fenoxaprop, quizalofop-P-ethyl, methomyl, Dan sterilization, insecticide Dan, monosultap, Bisultap,
Chemical Agents: white carbon black, to promote the agent D, accelerator TMTD, molecular sieve, activated clay, TBSI CZ, TBSI DM, TBSI M, TBSI TMTD, TBSI ZDC, phosphate Dibasic Lead acid, stearic acid salt.
Food and feed additives: Soy Protein Isolate, methionine chelate copper, starch, yeast powder, glucose.
Csutomer Plant Installation:
Technical Parameter:
spec
Barrel diameter(mm)
Main machine dimensions(mm)
Main machine power ( kw )
Treatmentwind capacity ( m 3 /h )
Water evaporation quantity ( Kg/h)
Floor space (mm 2 )
XSG-2
200
250x2800
5-9
300-800
10-20
3500x2500
XSG-3
300
400x3300
8-15
600-1500
20-50
3800x2700
XSG-4
400
500x3500
10-17.5
1250-2500
25-70
4000x3000
XSG-5
500
600x4000
12-24
1500-4000
30-100
4200x3200
XSG-6
600
700x4200
20-29
2500-5000
40-200
4250x3250
XSG-8
800
900x4600
24-35
3000-8000
60-600
4500x3500
XSG-10
1000
1100x5000
40-62
5000-12500
100-1000
4750x3750
XSG-12
1200
1300x5200
50-89
10000-20000
150-1300
5000x4000
XSG-14
1400
1500x5400
60-105
14000-27000
200-1600
5250x4250
XSG-16
1600
1700x6000
70-105
18700-36000
250-2000
5500x4500