China Low Frequency RFID Reader 125kHz 134.2kHz RF-1110-113160

Low Frequency RFID Reader RF-1110-113
1. Description
RF-1110-113 is a 125KHz/134.2KHz non-contact low frequency RFID reader, which automatically read passive tags through RF signals, and access to tag address and other related data, can work in a variety of harsh environments. The RFID reader can work in high-speed motion, fast read EMID and FDX-B tag. Operation is fast and convenient, with the easy installation, stable and reliable performance, mainly used in intelligent parking lot, AGV unmanned station label and management system of electronic tag reading.
2. Products feature and application
2.1 Feature:
n Support EMID and FDX-B protocol standard tag reading.
n RS232 serial communication interface, easy to operate.
n Read time fast, read rate less than 30ms every cycle.
n Typical Operating distance 80-90mm.
n Auto checks for presence of tag and output information.
n Engineering plastics, strong structure, easy to operate and install, suitable for use in industrial environment .
n Anti-collision function facilitates identification of tag.
2.2 Applications:
Mainly used in intelligent parking lot, AGV management system electronic tag reading.
3. Product Parameters

OperatingFrequency125KHz / 134.2KHz Transponder compatibilityEMID and FDX-B tag compliantReadingDistance80-90mm CommunicationInterfaceRS232Signalindication2 LED (Red and green)Power supply9-30VDC Read time30ms/8bits Housing colorYellow and black (black as sensor surface)Dimension80mm*80mm*40.5mmProtectionclassIP65AntennaCoils HousingmaterialPBT Workingtemperature-20ºC~+70ºC Stocktemperature-30ºC~+85ºC Workinghumidity10-90%

4. Product Photo

5. Product Installation
Installation location dimension:4-φ5.5mm*27.5mm

6. Wiring Diagram

Line NumberColorPin function1RedVin24vdc 2BlackGND3BlueTXD (RS232)4purpleRXD (RS232)

7. Communication format
Select the default Port Num, baudrate =9600, D parity=none, data8=8, Stop B=1.
When electronic tag moved into the communication field of the antenna, 20 bytes serial number will be displayed twice frame data once a time.
Shown as following:
Receive data format =[$]+[Tag type 1B]+ [ID number 15B]+ [ RCC checksum 2B]+ [ # ]
Explain as following:
[frame first bit]:$
[tag type] : 1 bit, E stand for EMID, F stand for FDX-B.
[decimal ID number] : 15 bit
For example" 9 9 0 0 0 0 0 0 0 1 1 1 1 1 1" 990 is country code; the ID number is 000000111111
[RCC checksum] :XOR value of the tag type and the ID number:
F^9^9^0^0^0^0^0^0^0^1^1^1^1^1^1 = 0x70, so RCC is 70
[frame end bit]:#
Connect the reader to the power supply, the red LED will be on,the green LED is off. When the tag in the field of interrogator antenna,the high speed RF communication interface allows to transmit data. At the same time the green LED is li t.
This reader can send 2 package data when the smart label in the field of the antenna once a time. If you want read the number of the label again,you can send the command $R#.