China Low Pressure Solar Energy Collector

Solar energy collector
1. Inner manifold: Stainless steel SUS304-2B
2. Outer manifold: Stainless steel SUS304-2B
3. Glass tube dimensions: 47mm X 1.5m and 58mm X 1.8m, Resist 25mm hail
4. Heat-preservation layer: By polyurethane, thickness 40mm
5. Bracket: Stainless steel, thickness 1.2mm
1. Working principle of high pressure solar heater: Utilizes the alternative absorption coating on the inner surface of the vacuum tube, from the high-temperature environment super-conduction tubes, leads the heat to the water tank, and produces hot water
2. Easy to use, also convenient to install
3. Can be put in the courtyard, on the roof or balcony
4. Inlet water hole connects to the tap water, and the outlet hole connects to the tap water, and the outlet hole produces pressure hot water directly
5. Working principle of low pressure solar heater: Adopts the alternative absorption coating to absorb the solar energy, heat the water in the vacuum tube directly, through the cold hot water convection, changes the solar energy into heat energy to store in the water tank.
Certificate: SRCC Solar Keymark CE ISO9001

model lighting
area() vacuum tube supply water
capacity(liter) 20GP/40HQ
loading Qty(sets) (mm) L(mm) Qty(pcs) IPRB F 581820 2.9 58.0 1,800.0 20.0 170-200 90/220 IPRB F 581830 4.3 58.0 1,800.0 30.0 250-300 65/157 IPRB F 471524 2.4 47.0 1,500.0 24.0 175-200 126/307 IPRB F 471530 3.0 47.0 1,500.0 30.0 220-250 92/223 IPRB F 581850 7.2 58.0 1,800.0 50.0 420-500 43/105 IPRB F 581860 8.6 58.0 1,800.0 60.0 500-600 38/93 IPRB F 471550 5.0 47.0 1,500.0 50.0 360-420 70/169 IPRB F 471560 6.0 47.0 1,500.0 60.0 440-500 62/149