China Low Price Qi Wireless Charging Module Fast Charging Solution Transmitting End PCBA Dual Coil PCB Fast Charging 2 Coil Module

Product Specification1. Input voltage: DC5.0V-9.0V, if the voltage exceeds this range, it will alarm and stop charging.2. Input current: 5V / 2A, 9V / 1.67A3. Output voltage: 5V ± 0.1V, (QI receiving equipment)4. Output current: 1A-1.5A (QI standard receiving equipment)5. Charging power: up to 15W6. Conversion efficiency: more than 80% (domestic reception is 65%)7. Transmission distance: up to 5mm, the recommended sending and receiving distance is 2mm ~ 4mm8. Standby power consumption: average power consumption is less than 30mW9, over temperature protection: when the temperature is higher than 53 degrees when charging, automatically stop charging for 1 minute, and then recharge after the temperature drops (imported IC TDK resonance capacitor)10, over-current protection: when the output current is greater than 2A when charging, automatically stop charging to prevent damage to the charger11. Standard: Qi wireless charging standard (WPC1.2)12, whether to support foreign body detection: support13.Indicator function: blue light when charging, full green (only the original machine comes with receiving support)14. Working frequency: 100KHZ-205KHZ Product Feature This module is a fast wireless charging dual coil solution, which can quickly and horizontally charge Note5, S6edge +, S7 and S7 edge horizontally and vertically. It supports wireless fast charging mobile phones within 2 hours. At the same time, 5W wireless charging phones It has good compatibility and can support Qi standard receivers such as Ti, IDT, PANASONIC.

Every product has been rigorously tested, because the electronic product's own special characteristics can not guarantee 100% no problem, please check before installing!