Feature:
1. Advanced technology
2. Low power consumption
3. High efficiency, crushing room with folio structure
4. Easy to maintain, etc
Application:
This tire shredder is used to crush waste steel wire radial tyre under normal temperature into small PCS of 3-8cm, prepare for the following steps: Grinding the PCS to rubber powder (10-30mesh), separate steel wire and fibre.
Structural Features:
This machine has the features of compact structure, advanced technology, low power consumption, high eficiency, crushing room with folio structure and easy to maintain, etc.
1. It adopts hard alloy steel as its blade, high rigidity and wearble.
2. Circle mesh screen is steel gridding structure, big area for material dropping is good for production of eligible rubber materail.
3. The oversize tyres should be cutted before crushing.
4. The shredding chamber is a combined structure and the cutter shaft adopts rolling bearings, which is convenient for both installation and maintenance.
5. The cylinder sieve will repeatedly send those unqualified chips or shivers back to the shredding chamber, while whose qualified ones will be let out of the sieve.
6. The transmission system adopts a NGW planetary hardened-gear speed reducer, which is compactly structured with features of lower noise, higher efficiency and longer service life.
size
LPS 800
LPS 1200
feeding size
≤ 800
≤ 1200
discharging size
≤ 5 0 x 80
≤ 60 x 10 0
capacity (t/h)
1-1.5
1.5~3
power of motor (kw)
45
155
dimension (m)
2.8x 2.1x 2.45.2x 2.8x 3.5weight(t)
5.8
15.6