China Machine to Make Plastic Bottle

Machine to make plastic bottle
YCQ-2L-2
Features:
A. Stable performance with advanced PLC.
B. Conveying preforms automatically with conveyor.
C. Strong penetrability and good and swift distribution of the heat by letting the bottles rotate by itself and revolute in the rails simultaneously in the infrared preheater.
D. High adjustability to enable the preheater to preheat preforms in shapes by adjusting the light tube and the length of the reflecting board in the preheating area, and eternal temperature in the preheater with an automatic thermostatic apparatus.
E. High safeties with security automatic-locking apparatus in each mechanical action, which will make the procedures turn into a state of safety in case of a breakdown in certain procedure.
F. No contamination and low noise with the air cylinder to drive the action instead of the oil pump.
G. Satisfaction with different atmospheric pressure for blowing and mechanical action by dividing the blowing and action into three parts in the air pressure diagram of the machine.
H. Strong clamping force with high pressure and double crank links to lock the mold.
I. Two ways of operating: Automatic and manual.
J. Safe, reliable, and unique design of the position of valve to make the air pressure diagram of the machine easier to understand.
K. Low cost, high efficiency, easy operation, easy maintenance, etc, with automatic technological process.
L. Contamination is avoided for the bottle body.
M. Ideal effect of the chilling with the chilling system.
N. Easy installation and starting
O. Low rejection rate: Less than 0.3percent.

item
YCQ-2L-2

Bottle type specification




cavity
2
output(PCS/HR)
1500-1800
Max. volume (L)
2L
Bottle mouth maximum overall diameter (mm)
80mm
Bottle biggest diameter
100mm
Bottle maximum height
330mm

Power specifications


Light tube quantity
32pcs
Light tube power
0.75kw
Maximum heating power
24kw
All electric machine installation
27kw
Actual consumption
8.1kw

Air pressure specification


Work pressure
7-9kg/cm2
Low-pressure gas consumption
1000Ltr/min
Blow bottle pressure
25-35kg/cm2
Higher -pressure gas consumption
1500 Ltr/min

Frozen water specification


Work pressure
5-6 kg/cm2
Temperature range
10
Consumption
5000kcal/hr
Frozen water flow
30Ltr/min
Machine specification

Size of the machine
2.25x1.6x1.7 (m)
Weight of the machine
2.5ton

Transportation:
It is located in the beautiful port city of Zhangjiagang with convenient traffic; it's about 150 km away from Shanghai.
Products:
PVC/HDPE/PP-R pipe extrusion line, PVC & WPC profile extruding line and plastic sheet production lines with the relative auxiliary machine, PE film/ PET bottles recycling line and pelletizing lines.
Market:
Our products have been exported to Middle East, Southeast Asia, South America and Europe etc. We received the universal confirmation and trust from our customers except of the precious experience.
Idea:
Abide by the logos of "Sincerity, Development, innovation, Win-Win" constantly, we are honorable to cooperate with friends at home and abroad by providing the high quality products, technology and service!