China Manganese Jig Machine

Jig Machine, Saw-tooth Wave Jig
1. High capacity
2. High concentration ratio and high recovery
3. Fabricated with highest quality material
4. The pulsation curve is saw-tooth wave shape facilitate heavy mineral to settling
5. Saving water 30-40% than ordinary jig
6. The pulsation speed very easy adjusted by regulator
7. Suitable for roughing and desliming
8. Can achieve a good result in processing such as placer gold, tungsten, iron, tin, hematite, cope, tantalum-niobium, titanium, manganese, barite, zirconium, chrome and gemstone etc.
Our Saw-tooth Wave Ladder Jig is a new type of energy saving and high efficient gravity separation equipment and developed based on the traditional Sine Wave Jig. The difference between Saw-tooth Wave Ladder Jig and Sine Wave Jig is that the pulsation curve for jigging is saw-tooth wave shape, with speedy upward flow and slow downward flow. Bed layer is elevated integrally and slowly dropped with a long effective loose time, allowing significant increase of handling capacity for unit screen surface, decrease of lower limit of grain size recovery and large save of make-up water for undersize fraction.
Industrial tests carried our of Saw-tooth Wave Ladder Jig and Sine Wave Jig for comparison showed that the recovery rate for operation of Saw-tooth Wave Ladder Jig is raised by Sn: 3.01%, W: 5.5%, Pb: 1.63%, Zn: 2.04%; The water consumption reduces 30%-40% than traditional Jig. The area reduces 1/3 and the stroke may adjust also.
Ore dressing of our Saw-tooth Wave Ladder Jig is capable of handling almost full sizes of mineral materials other than very fine material. It features simple process operation, heavy duty equipment handling capacity with final products being obtained through one time separation.

ModelHutchDiaphragmFeeding Size
(mm)Amount of make-up water (m 3 /t)Make-up water pressure
(Mpa)Capacity
(t/h)Power
(kw)Dimensions
(mm)Weight (Kg)ShapeArea
(m 2 )Stroke (mm)Frequency of Stroke
(r/min)JT0.57-1Trapezoid0.57(M12)8.5- 12
(M17)10- 1780-180< 61-3≥ 0.051-2.51.51550x 780x 1530610JT1-1Trapezoid1.04< 101-32-42.22270x 1110x 1890900JT2-2Rectangle2.28< 101-34-833225x 1550x 20501640JT3-1Trapezoid3.3M15
M20
M2580-120< 101-36-105.53180x 2000x 30303260JT5-2Trapezoid4.86< 101-310-157.53600x 2000x 26004500JT1.5-2Rectangle1.53M25
M3080-120< 301-25-833200x 1550x 20501520JT4-2Rectangle4.33< 301-210-157.53600x 1850x 26004600