China Manganin rod Resistance Alloy wire Wound Resistance wire

Manganin plate/ Shunt Resistor manganin wire (6J13, 6J12, 6J8)

Product Description

Manganin wire widely used forlowvoltage instrumentationwith the highest requirements, the resistors should be carefully stabilised and the application temperature should not exceed +60 °C. Exceeding the maximum working temperature in air may result in a resistance drift generated by oxidizing. Thus, the long-term stability can be affected negatively. As a result, the resistivity as well as the temperature coefficient of the electric resistance may slightly change. It is also used as low cost replacemeMachine Tools nt material for silver solder for hard metal mounting.

Chemical Content, %

Ni

Mn

Fe

Si

Cu

Other

ROHS Directive

Cd

Pb

Hg

Cr

2~5

11~13

<0Socket & Outlet .5

micro

Bal

-

ND

ND

ND

ND

Mechanical Properties

Max Continuous Service Temp

0-100ºC

Resisivity at 20ºC

0.44±0.04ohm mm2/m

Density

8.4 g/cm3

Thermal Conductivity

40 KJ/m·h·ºC

Temp Coefficient of Resistance at 20 ºC

0~40αx10-6/ºC

Melting Point

1450ºC

Tensile Strength(Hard)

585 Mpa(min)

Tensile Strength,N/mm2 Annealed,Soft

390-535

Elongation

6~15%

EMF vs Cu, μV/ºC (0~100ºC)

2(max)

Micrographic Structure

austenite

Magnetic Property

non

Hardness

200-260HBPre-Press Equipment

Micrographic Structure

Ferrite

Magnetic Property

Magnetic

Resistance Alloy- Manganin Sizes / Temper Capabilities

Condition: Bright, Annealed, Soft
Wire diameter 0.02mm-1.0mm packing in spool, big than 1.0mm packing in coil
Rod, Bar diameterGift Box & Bag 1mm-30mm
Strip: Thickness 0.01mm-7mm, Width 1mm-280mm

Enameled condition is available

Manganin Applications:

1;Itisusedformakingwirewoundprecisionresistance

2; Resistanceboxes

3; Shuntsforelectricalmeasuringinstruments

Manganinfoil and wire is used in the manufacture of resistors, particularly ammeter shunts, because of its virtually zero temperature coefficient of resistance value and long term stability. Several Manganin resistors served as the legal standard for the ohm in the United States from 1901 to 1990. Manganin wire is also used as an electrical conductor in cryogenic systems, minimizing heat transfer between points which need electrical connections.Manganinis also used in gauges for studies of high-pressure shock waves (such as those generated from the detonation of explosives) because it has low strain sensitivity but high hydrostatic pressure sensitivity.