China Manual Screen Printer T4030+ Stencil Printer

Summary
With the rapid development of the electronics industry, integration chips are increasing, there are some troubles for small screen printing machines: 1 working table. The working table can't meet high accuracy; 2 manual scraper. There are error in angle, pressure and speed. 3 the printing consistency can't be meet; 4 it is difficult to position FPC. Manual screen printing machine T4030+ solutes above problems and have appied national patent. Using T4030+, electronic works can print FPC with low cost.
With vacuum absorbtion platform, T4030+ is suitable for FPC and thinner PCB.
Working principle
1 x, y, z axis and angle can be precision adjusted, position between welding pad on the PCB and holes on the template by adjusting axis. Adjust distance between PCB and template by lifting platform.
2 The level of position platform is less than 5 um.
3 Template is manufactured in numerical control center which can improve level and accuracy. It is convenient for installing template.
4 the fixed shelf of template can be adjusted by position head to improve position accuracy.
5 the lift of template is finished by micro-power systems of spring, it doesn't need weight hammer. It can save printing area.
6 with vacuum absorb platform, outer vacuum pump to position and print FPC and PCB. At the same time it can meet abnormity components, glass, silicon chip and scutcheon.
Technology parameters
Model T4030+
Printing area Max. 300*400mm
Application silk screensteel meshwork
Scraper 200mm(standard ); 300/400mm(optional )
Best printing accuracy 0.5mm IC; Tin bore is more than 0.5mmBGA
Best printing speed 500 pieces / hour
Thimble support Standard
Vacuum absorb Standard configuration 2 groups (increase adsorb template)