China Manual Stencil Printer T4030

T4030:
Max Printing size: 400*300mm
Adjustment method: Contrapuntal calibration
Refined adjustment method: Adjust through accuracy screen pole, the accuracy is 0.1mm
Suitable range: Silk screen and steel screen
Expected printing accuracy: 0.5mm IC; BGA > 0.5mm Raster
Weight: 20kg
Dimension: 700*600*350mm
Introduction
The rapid development of the electronics industry, the integration and the rise of emerging
Chips make the accuracy of the printer a great challenge. This is especially true for small
Manual printer, which, among other things, may have the following problems:
1. The countertop can support any high-precision pressure.
2. The manual speed, attack angle and pressure can not properly be controlled.
3. The continuity of printing is a problem.
The manual SMD screen printers T4030 eliminates the above problems. The T4030 in China
Patent pending, similar functions such as automatic screen printer has, however at a lower cost.
The T4030 reduced production costs andimproved performance on the other hand.
T4030 is a manual high precision screen printer, without electrical components and without the
Need for compressed air. X, Y, Z axes and the blade angle can be adjusted. A match between
PCB and screen or stencil is reached via the setting of the axes.
Features:
1. Screw vertical: Height adjustment of the stencil frame
2. Print stencil holder: Holds the print template
3. base plate: Workspace
4. Locking block: Longitudinal fixation of the Board
5 Board fixation support: Holds the Board in width
6. Support bolts: Bolts to support the Board
7 base plate with mounting holes: Holes for inserting the support bolt
8 PCB holder: Fixing of the Board on both sides
9 Fixing screws of the Platinenhalters: Setting of the Platinenhalters
10 Locking screw for printing stencils: Adaptation to the height of the print frame
11 Knurled screw horizontal: Adjustment of the pressure measures in length.
12 Fine adjustment of parallelism: Setting of the pressure frame width
13 Knurled screw vertical: The vertical direction fixed
14 Knurled screw vertical: The level of fixed
Model T4030 Max Printing size 400*300mm Adjustment method contrapuntal calibration Refined adjustment method adjust through accuracy screen pole, X Dimension 700*600*350mmthe accuracy 0.1mm