China Manufacture 3 ply Non woven Surgical Disposable Face Mask Machine Fully Automatic Making Machi

Product Description

The disposable mask machine has a high degree of automation, a fast film-ejecting speed, a uniform size of the film, and the nose bridge is in the middle and does not hurt the material, thereby effectively ensuring the quality of the mask produced; The machine of multi-layer material plane masks can use 1 ~ 4 layers of PP spunbond non-woven activated carbon and filter materials. The entire machine is from a raw material feeding to nose line insertion, edge sealing, and the finished product is all in one line Automated operation, according to different raw materials used, can reach different standards such as N95, FFP2 and so on. The flat mask production equipment has stable performance, high output, low defect rate and easy operation. The mask film machine plus several inner ear band mask machines, outer ear band mask machines, banded mask machines or ear band spot welding machines, can produce various types of masks such as inner ear band masks, outer ear band masks, band masks and so on. The disposable mask machine is a fully automated production mask, which can be automated from one line of automatic feeding, folding, hemming, ultrasonic fusion, slicing, etc., saving labor and time, and the maximum production capacity of the machine is 160 to 180 pieces per minute.

Advantage

KN95 mask machine features:1. The machine is dense, small in size and does not occupy space;2. PLC program control, high stability and low failure rate;3. The whole machine adopts aluminum alloy structure, which is beautiful and firm without rust;4. Photoelectric detection to reduce the error rate.5. The welding strength of the ear strap is adjustable.6.Using ultrasonic system, stable performance and easy operation.

Specification

Item

Number of hanging shafts

Width (mm)

Coil outer diameter (mm)

Inner diameter of barrel (mm)

Weight

Non-woven
Melt-blow cloth

3

170~200

Φ600

Φ76.2

Max 15kg

Bridge of nose
Steel wire covered plastic / pure steel wire / full plastic

1

3-7

Φ400

Φ76.2

Max 25kg

Ear belt

2 bags

160*3

-

-

10N

Packing & Delivery

Company Profie

Products Description

KN95 mask production steps:1. Incoming material embossing and cutting: unwinding material, three layers of non-woven fabric, one layer of velvet cloth, knurled cutting once formed, knurled cutting formed samples2. Ultrasonic welding ear wire: manual single-point welding ear wire, one mask with four welding points, it takes about 6 seconds to complete the ear wire welding work of a mask.3. Nose bridge support: Install the nose bridge support on the sheet mask through the viscous device. Nose bridge support: length: 9mm width: 5mm4. Forming by folding and crimping: the part of the right side is pressed after being opened.