China Manufacture Skid Bars Laminated Skid Blocks Sb407L Sb408r

HYSTER has been an independent international supply, design and engineering company, since 1995.
welcome to choose us - the most experienced manufacturer and exporter for laminite wear plates(ASTM A532 chromium carbide white iron & mild steel backing plate, 63HRC-700BHN), domite chocky bars, chromium carbide wear blocks, grinder hammer tips, white iron wear bars as well as Cr-c overlay wear plate.
Types

TypeItem No.Size(mm) Dimension(mm)N.W.(kg)1SB1-214214X101X34 214 1012212345.1SB1-302302X101X343021012212347.3SB1-154154X101X341541012212343.7SB1-279279X75X34279752212346.12SB2-214214X101X342141012212345.9SB2-214R214X101X342141012212345.9SB2-302302X101X343021012212348.4SB2-302R302X75X34302752212348.4SB2-154154X101X341541012212344.2SB2-154R154X75X34154752212344.23SB3-250A250x150x4525015020254513.1SB3-200200x150x4520015020254510.5SB3-250B250x250x4525025020254521.9We can produce according to your specific need.

>Material,
ASTM A532 15/3 CrMo white iron casting , chemical composition ( percentage )

CCrMoSiMnNiCuPS2.0-3.314-18≤ 3.0≤ 1.5≤ 2.0≤ 2.5≤ 1.2≤ 0.1≤ 0.06

Q235 mild steel backing , chemical composition ( percentage )

CSiMnPSCrNiMoCu0.20.351.40.0450.050.30.30.30.3

>Mechanical Property,
-Minimum Hardness, 700 HBN / 63 HRC
-Minimum Tensile Strength, 630Mpa.
-Minimum Shearing Strength, 250Mpa.

OTHER TYPICAL PRODUCTS

AND SERVICE
-Wear plates, wear liners
-Chocky bars and wear buttons
-Wear blocks, wear bars
-Custom made wear liners
-Bucket repair and protection

-Full Fabrication services
-Sugar mill hammer tips
-Drilling, milling or machining
-Casting/Investment casting
-Fast service and timely delivery

Following are our laminated wear blocks:
Types---the most common ones are:
1) Chocky bars (CB 25. CB40, CB50, CB65, CB80, CB90, CB100, CB130. CB150)
2) Standard wear bars (DLP201A, DLP 125, DLP184, DLP528, DLP619, DLP451, DLP450, DLP2230, DLP2017, DLP4, DLP919, DLP1191, DLP515, DLP200, DLP271, DLP270, DLP508, DLP115, DLP337, DLP1101, DLP343 )
3) Shaped wear bars
4) Wear buttons& donuts(WB60, WB75, WB90, WB110, WB115, WB150, DLP1920, DLP1921, DLP1994, DLP2196)
5) Shredder/Grinder hammer tips (DLP1654,90x90x50mm; DLP653,90x90x45mm; DLP1927, 90x90x55mm)
6) Bi-metallic wear plates
7) Knife edges(DLP1065-22, 203X22X50MM; DLP1265-22,305X22X50MM; DLP1065A-16, 203x16x50mm, DLP1065A-25, 203x25x62mm; DLP1265A-25, 305x25x56mm)
8) Skid bars, skid blocks(DLP412, 250x150x45mm; DLP413, 200x150x45mm; DLP414, 250x250x45mm)
9) Elbow wear blocks
10) Other sizes and shapes
11) Multi-function gradient cutter tooth
12) Rockbox liners
13) Micro-ledges