Rolled mesh consists of zinc coated double twisted steel woven wire meshmanufactured in accordance with ASTM A975. The steel wire used in themanufacture of the mesh is heavily zinc coated soft temper steel. The
standard specifications for the wire-mesh are shown in Tables 2, 3, 4.Rolled Mesh is used for a wide variety of civil applications. It is used inconjunction with other double twisted wire mesh products such as gabions,mattresses, etc. or it is used alone for rockfall applications, repair work, etc.Rolled Mesh is supplied at standard lengths and can be cut to fit on site.Wire
All tests on wire must be performed prior to manufacturing the mesh. Allwire should comply with ASTM A975, style 1 coating and galvanized. Wireused for the manufacture of Rolled Mesh and the lacing wire, shall have amaximum tensile strength of 75,000 psi (515 MPa) as per ASTMA641/A641M, soft temper steel.
Mesh TypeD (mm)Mesh Tensile
Strength (kN/m)Mesh Connection to Selvedge (kN/m)Punch Test (kN)6x864230010.217.88x108351.120.426.7
Table 1 - Sizes for MeshL (m)W (m)502
Table 2-Standard Mesh WireMesh TypeD (mm)Mesh ToleranceMesh Wire (mm)6x864±10%2.208x1083±10%3.00Table 3-Standard Wire DiametersMesh TypeMesh Wire (mm)Selvedge Wire (mm)Lacing Wire (mm)6x82.202.702.208x103.003.902.20
Table 4-Wire Tolerances and CoatingWire Diameter
ø mm2.202.703.003.90Wire Tolerance (±) ø mm0.100.100.100.10Min. Qty of Zinc gr/m2214244259275
ContactMr. Jack GeeMobile+8615131169886Homepagewww.zhuoda-gabion.com