China Manufacturer Single Head Wood Sander

Good Single Head Wide Belt Sanding Machine RWS630R(RP)-1000r (RP)-1300r (RP)
Parameter

TYPERWS630R(RP)RWS1000 R(RP)RWS1300 R(RP)Working Width30-630mm30-1000mm30-1300mmWorking Thickness2-100mm2-100mm2-100mmFeeding Speed5-25m/min5-25m/min5-25m/minSize of Abrasive Belt650*1900mm1020*2000mm1320*2200mmSanding shelf ø190mm steel,11kw
(85sh ø190mm rubber)ø190mm steel,15kw
(85shø190mm rubber )ø190mm steel,30kw
(85shø190mm rubber )Sanding Belt (cloth)80 Mesh80 Mesh80 MeshTotal Motor Power12.47kw16.47kw33.47kwWorking Air Pressure>=0.55Mpa>=0.55Mpa>=0.55MpaSpeed of Sucked Air>=25m/s>=25m/s>=25m/sOverall Dimensions1862*1265*2000mm1620*1675*2040mm1940*2020*2200mm

Standard Specification:
1.Aluminum sanding pad, Large contact area ,achieve good polishing effect. Special
swallow tailed structure, increase its stability
2. Pulley one-piece roller, enhance the overall balance
3. Customized heavy tense cylinder, bold piston rod with better stability
4.Cast Iron Calendering roller seat, pull-down spring extends operating life.
5. Belt swing is adjustable by operating the knob, adjusting the belt swing becomes convenient.
6. The height of worktable can be adjusted according to the thickness of the workpiece.
Lock plate: The machine automatically stop working to protect machines and staff from injury once
the material is thicker than setted.
7.Digital Control Panel
Height of processing is adjustable , easy to operate, convenient to learn and train.
8.Photoelectric switch blower
Automatically clean the surface dust of the photoelectric switch to avoid crashing caused by dust accumulation.
9.Granite worktable, no deformation, good stability
10.Independent bearing hanging plates to fix the height of roller.
Equipped with locating rod ,easy to adjust the height of roller.

Optional :
1.Sand belt swing blower device,automatically clean the surface dust of the sanding belt in operation
2.Automatic elevation adjustment of sanding pad.(PLC control)
3.Air bag sanding pad, constant air pressure inside. Used for sanding wooden veneered board.
4.Emergency Stop Switch
5.External cleaning brush roll
6.power break protection device
7.Central power switch
8.Vacuum to the conveyer belt( 5.5kw high pressure positive blower)
9.Adjust the frequency converting speed of conveyer belt.
10.Optional outlook
11. Eccentric shaft ,lifting adjusted by pneumatic turn-over.Can be used to make fine adjustments
to the lifting roll to adjust the amount of sanding.The roller automatically rise to prevent the panels
and machines from damaging for emergency stop.
Samach'S Service and dominants:
1: Professional team of techniques study and research, guarantee the Machine latest and improving efficiency.
2.Knowing China and world markets well, offer professional soluttions.
3.Fast market reaction, guarantee our partners always in front edge.
4.Supeiror Guarantees,quality of our machine and sell-after service.
5.OEM/ODM are available.
6.Principle: One cooperation, forever partners.