China Manufacturer Telemechanic 20A Household Manual AC Contactor

Description
WCT series home AC contactor is a kind of control electric appliance which is used for long distance switch on and break off sense or low load, electric resistance furnace, household appliances and similar application.
Technical data

Power circuit

Voltage Rating(Ue) 1P, 2P

250VAC

3P, 4P

400VAC

Endurance(O-C)

Electrical

100000 cycles

Maximum number of switching operation a day

100

Additional characteristics

Insulation voltage(Ui)

500VAC

Pollution degree

2

Rated impulse withstand voltage(Uimp)

2.5kV(4 kV for 12/24/48V AC)

Degree of protection
(IEC 60529)

Device only

IP20

Device in modular enclosure

IP40

Tropicalization (IEC 60068-1)

Treatment 2(relative humidity 95% at 55ºC)

Dimension
Attention
1. Confirm whether the product voltage, current, frequency and use category meet the requirements before use;
2. Connect the control circuit first for no-load operation test and then connect the load in case of no abnormality;
3. Regularly tighten the terminals and remove the deposited dust;
4. Don't make the foreign matters fall into the product
Connection

Our Services

1. prompt reply: Any inquiry or questions would be replied within 24 hours.2. Quality Product: Manufacture company, each of the products is tested and calibrated.3. Hospitality: Offer smiling service and your visiting is highly welcomed4. Fast delivery: delivery time is within 2-5 days usually, other occasion depends on the order qty.

Feedback