China Marine Double Mooring Bitt Bollards

Marine Double Mooring Bitt /Bollards

Marine Mooring Double Bollard:

The marine mooring bollard is a post used on ship's deck or quay. It is a simple and cost-effective way to fulfill mooring requirements and safely secure vessels alongside jetties, berths, wharves and dolphins in ports and harbors. It is welded by qualified steel tubes with plates. Different types and sizes of the bollards are for sale at YSmarines with best price, which including the single cruciform bollard, double cruciform one, NS2584 type one, DIN 82607 one, ISO13795 one, ISO13797 cruciform one, JIS F-2001 one, GOST11265-73 double cruciform one, dock bollard and other customized type bollard according to the requirement of clients.
The welded steel bollard is a double bitt bollard according to the standard of ISO13795, suitable for installation on sea-going vessels to meet normal mooring and towing requirements. The posts of the bollards shall be constructed from steel tubes or formed from the plate. A low-friction surface coating is not recommended so as to increase the holding force of the mooring rope under figure-of-eight belay according to ISO standard. Depending on the construction, the bollards shall be classified as two types, which are Type A - with compact base plate and Type B - with a wide base plate.

Specification of Marine Mooring Double Bollard:

Standard: ISO13795:2012Depending on the construction, welded steel bollards shall be classified as the following two types:Type A - with compact base plate;Type B - with wide base plate.Design Load = 1.25 x SWLFinishing: 2-layer of shop primer anti-rust painting after sand blasting 2.5Certificate: DNV-GL, BV, LRS, ABS, RINA, IRS, RS, CCS, KR, NKPacking: stong steel palleBelow is some detailed pic :

Technical Parameters of Marine Double Mooring Bitt