China Max 40 Bar Air Pressure Booster System for Injection Molding

Suncenter Air Pressure Booster Pump
Suncenter DGMA02 series Pneumatic Air booster pump with single air control non-equilibrium air distributing valve to realize the reciprocating motion of the pump, are made of aluminum alloy and stainless steel manufacturing, all the seals are imported high quality products and equipment for the pneumatic drive are 10bar, in order to ensure the pump's life, it is recommended driving pressure is less than or equal to 8 bar. This series pump's drive piston diameter of 100mm, as a single action pump, all single acting pump head with exhaust cooling.

* technical parameters
Driven source: clean compressed air
Air pressure control system
Drive compressed air pressure: 1-8bar (recommended drive pressure <8bar)
Boost Ratio:2:1
Maximum flow rate : 580L/min
Maximum air output pressure: 16bar.
Applicable medium: clean air
Air inlet minimum pressure: 1bar
Suncenter DGVA02 Pneumatic Air booster pump with single air control non-equilibrium air distributing valve to realize the reciprocating motion of the pump, are made of aluminum alloy and stainless steel manufacturing, all the seals are imported high quality products and equipment for the pneumatic drive are 10bar, in order to ensure the pump's life, it is recommended driving pressure is less than or equal to 8 bar. This series pump's drive piston diameter of 160mm, as a single action pump, all single acting pump head with exhaust cooling.
* technical parameters
Driven source: clean compressed air
Drive compressed air pressure: 1-8bar (recommended drive pressure <8bar)
Boost Ratio:2:1
Maximum flow rate : 1600L/min
Maximum air output pressure: 16bar.
Applicable medium: clean air
Air inlet minimum pressure: 1bar
Suncenter DGVA05 series Pneumatic Air booster pump with single air control non-equilibrium air distributing valve to realize the reciprocating motion of the pump, are made of aluminum alloy and stainless steel manufacturing, all the seals are imported high quality products and equipment for the pneumatic drive are 10bar, in order to ensure the pump's life, it is recommended driving pressure is less than or equal to 8 bar. This series pump's drive piston diameter of 160mm, as a single action pump, all single acting pump head with exhaust cooling.

* technical parameters
Driven source: clean compressed air
Air pressure control system
Drive compressed air pressure: 2-8bar (recommended drive pressure <8bar)
Boost Ratio:5:1
Maximum flow rate : 820L/min
Maximum air output pressure: 40bar.
Applicable medium: clean air
Air inlet minimum pressure: 2bar
Characteristics :
It is using pure compressed air as the driving source, pneumatic booster pump for the pressure source, the use of pure air as the pressurized medium, the output air pressure and the pressure of the driving air source pressure. By adjusting the pressure of the driven air source, the corresponding pressure of the air pressure can be obtained. When the air pressure of the air pressure and the pressure of the booster is balanced, the pneumatic booster pump stops the pressurization, and the output air pressure is stable. Therefore it has the characteristics of explosion proof, energy saving, environmental protection, adjustable output pressure, small volume, light weight, simple operation, reliable performance and wide application range.
Technical spcification

ModelPressure boost
ratioMax. air
outlet pressure Formula to
calculate air outlet pressure PBConnection:
(NPT thread)Max. flow rate (L/min)DGMA022:116 bar2XPL3/8 / 3/8580DGVA022:116 bar2XPL3/8 / 3/81600DGMA033:124 bar3XPL1/2 / 1/2420DGVA055:140 bar5XPL1/2 / 1/2820

DGS-DGMA02 air pressure booster system
The system including: DGMA02 air booster pump,
F.R.L combination (adjust driven air pressure+ filter+ lubricant)
Air tank (20L/40L),Driven air switch, high pressure needle valve,
high pressure gauge, reducing valve
DGS-DGVA05 air pressure booster system
The system including: DGVA05 air booster pump,
F.R.L combination (adjust driven air pressure+ filter+ lubricant)
Air tank (20L/40L),Driven air switch, high pressure needle valve,
high pressure gauge, reducing valve

Dongguan Suncenter Fluid Control Equipment Co., Ltd is the member company of Suncenter Group, which is located in Dongguan city of Guangdong province in China. With more than 15 years experiences in fluid pressure exchange and controlling field, we provide various kinds of pneumatic and hydraulic booster pumps, systems and solutions to the customers all over the world. Due to our best product quality, competitive price as well as excellent after-sales service, we have win a great reputation in the field.

Our main products including:
High Pressure Booster Pumps (Air Driven Gas Booster Pump, Air Driven Liquid Pump, Air Amplifiers)
High Pressure Systems (Gas/Liquid Booster Stations,FM200 filling machine, Tube Expanding Machine)
High Pressure Test Equipment(Hydraulic/Burst/Hydrostatic test machine,Cylinder test machine,
Valve test bench,Impulse Testing Machine, etc.)

Product Application
Oil Industry, Gas Industry, Chemical Industry, Fire Fighting, Research Institutions etc.

Our service
13 months' free warranty since the purchasing date and free technical support during lifetime