China Mbr Membrane Bioreactor for Paper Making Waste Water Treatment

MBR Sewage Treatment Equipment Integrated Sewage Purification Equipment
overview
Membrane Bioreactor (MBR) is a kind of advanced technology developed since the end of 20th century which realized the efficient combination of membrane separation technology with biological technology. The membrane separation technology replaces the traditional active sludge method and the normal filter unit, its strong separation ability can make the SS turbidity near to be zero. Hydraulic retention time (HRT) sludge age (SRT) is completely separated, the outlet water is good and stable in quality, it can be reused without the third level treatment. Due to the high security and economic and effective water, it greatly expands the scope of application of waste water recycling.

technical parameter

Project
Inlet water quality
Outlet water quality
BOD5(mg/L)
≤200
≤20
CODcr (mg/L)
≤450
≤90
NH3-N(mg/L)
≤30
≤10
SS(mg/L)
≤300
≤60
number of fecal coliforms(number /L)

≤500

nological Process:

Sewage → Grille → Regulating pond → MBR Bioreactor → Discharge(reuse)

1. Temperature: 5ºC~45ºC, average membrane aperture 0.10 μm.

2. PH: 2~12, membrane thickness: 40μm.

3. Outlet water turbidity: <1 NTU , outlet water SS <1mg/L.

4. Membrane area: 8m2, advised gas-water ratio: 25:1~30:1.

5. Operating pressure: -0.01 ~ -0.03MPa.
Features:

1. Because of the highefficiency solidliquid separation, it can efficiently remove the SS, colloidal material and dead microbe in the sewage, no need sedimentation tank, or filter device, nor other solid-liquid separation device.

2. The MBR can make the biomass in biological treatment unit maintain high concentration, thus highly improve the volume loading. Meanwhile, the high efficient membrane separation can shorten the HRT. The device is with a compact structure and small space occupation.

3. MBR can filter out bacteria, part of the harmful material such as virus, it can obviously save dosing disinfection dosage, greatly improve the quality of the output water and reduce the operating cost and widen the scope of application of water.

4. Due to the strong interception function of MBR, it can keep the microbe in the reactor to avoid the loss of all kinds of microbe groups, which is good for the growth of the bacteria (such as the nitrifying bacteria), at the same time, it can lengthen the residence time of difficult degradable macromolecule organics to improve the decomposition so as to make the metabolic system process smoothly. The system has a strong impact resistance and wide suitability.

5. It can realize the completely separation of HRT and SRT. By the extended aeration, it can consume the organics, it can theoretically achieve the effect of no excess sludge emissions, thus reduce the surplus sludge treatment costs significantly.
6. The unique mode of operation makes the membrane surface no blocking, and the cleaning interval time is long. The way to clean the membrane is easy, since the membrane module can be separately cleaned, thus, the maintenance is convenience and simple.

As a waste water treatment system features simple operation, high automation and modular design, it also has below advantages:
*Save 50% occupying area compared with traditional system.

*Relative high MLSS value(<15g/L)and long residue time for sludge(<60days).

*Stable producing water quality for different inlet water.

*Less sludge residue reduces cost for sludge treatment.

*Low energy consumption, simple cleaning and low operation cost.

Company introduction
Shandong Better Environmental Protection Technology Co., LTD., established by introducing foreign advanced technology, is a manufacturer of urgent research and development, design, production and sales of environmental protection equipment such as sewage treatment, solid-liquid separation, waste incineration, etc. It has applied for more than 20 national patents and is a well-known domestic supplier of complete set of environmental protection equipment.company was established in 2006, under the jurisdiction of two wholly-owned subsidiaries.It covers an area of 87,900 square meters, with a total registered capital of 89 million yuan, and has huding assets of 150 million yuan, with total assets of over 300 million yuan.
Our company relies on perfect production and testing equipment, stable and reliable product quality, products widely used in various fields of fish environmental protection management.The equipment sells well all over the country, and has been exported to more than 30 countries and regions, such as Japan, Netherlands, Errose, Middle East, Central Asia, Southeast America, South America and Africa.

"There is no best, only better", is the pursuit of the Bettel people forever.All staff of Betel sincerely welcome Chinese and foreign friends to visit our company and negotiate business!We are willing to cooperate sincerely with you for the lofty cause of environmental protection.
We always put the quality as the first consideration! If you need further information , feel free to contact Us! We are more than happy to help you with any inquiry. Call us or send us an email, and we'll be ready to assist you.
A: We are a factory, we have rich experience for manufacturing water processing equipment for more than 10 years.
A: Our factory is located in No.1137, Zhucheng city, Shandong Province, China. It is about 2 hours from Qingdao airport. We can pick you up if you need, welcome to visit our factory.
A: No minimum order, but it can get a discount if you order a large quantity.
A: Yes, we have ISO,SGS certificate.
A: Yes, we have a professional design team. We can provide drawings according to your requirements.
A: You can provide us your water sources, water quality, flow rate and ground area (contact us for more details).
A: TT and L/C are acceptable and TT will be more appreciated. 30% deposit before producing, 70% balance before loading by TT.
A: It depends on order quantities. Generally speaking, the delivery time will be within 4 to 6 weeks.
A: We use standard package. If you have special package requirements, we will pack as required, but the fees will be paid by customers.
A: We use the world-famous paint, like SigmaCoatings, PainBow,etc. What's more, we paint strictly according to the standard process.