China Mbr Sewage Treatment Equipment Water Purification Water Treatment Equipment

MBR Sewage Treatment Equipment Water Purification Water Treatment Equipment

This equipment is an integrated set of water treatment equipment that organically combines MBR membrane separation technology, biological treatment technology and intelligent control technology. It overcomes the shortcomings of traditional sewage treatment process, such as lengthy process, large area and complicated operation and management. The process of the device replaces the secondary sedimentation tank in the traditional process, and it can efficiently perform solid-liquid separation to obtain stable intermediate water for direct use. It can also maintain a high concentration of microorganisms in the biological pool, the process has less residual sludge, extremely effective removal of ammonia nitrogen, effluent suspended solids and turbidity are close to zero. Bacteria and viruses in the effluent are greatly removed, and the effluent water quality is better than the reclaimed water quality standard (more than the national level A standard).
Features:
1. Because of the high-efficiency solid-liquid separation, it can efficiently remove the SS, colloidal material and dead microbe in the sewage, no need sedimentation tank, or filter device, nor other solid-liquid separation device.
2. The MBR can make the biomass in biological treatment unit maintain high concentration, thus highly improve the volume loading. Meanwhile, the high efficient membrane separation can shorten the HRT. The device is with a compact structure and small space occupation.
3. MBR can filter out bacteria, part of the harmful material such as virus, it can obviously save dosing disinfection dosage, greatly improve the quality of the output water and reduce the operating cost and widen the scope of application of water.
4. Due to the strong interception function of MBR, it can keep the microbe in the reactor to avoid the loss of all kinds of microbe groups, which is good for the growth of the bacteria (such as the Nitrifying bacteria), at the same time, it can lengthen the residence time of difficult degradable macro molecule organics to improve the decomposition so as to make the metabolic system process smoothly. The system has a strong impact resistance and wide suitability
5. It can realize the completely separation of HRT and SRT. By the extended aeration, it can consume the organics, it can theoretically achieve the effect of no excess sludge emissions, thus reduce the surplus sludge treatment costs significantly.
6. The unique mode of operation makes the membrane surface no blocking, and the cleaning interval time is long. The way to clean the membrane is easy, since the membrane module can be separately cleaned, thus, the maintenance is convenience and simple.The module design make the machine flexible, it is easy to expand the volume.
Technological Process:
Sewage → Grille → Regulating pond → MBR Bioreactor → Discharge(reuse)
1. Temperature: 5ºC~45ºC, average membrane aperture 0.10 μm.
2. PH: 2~12, membrane thickness: 40μm.
3. Outlet water turbidity: <1 NTU , outlet water SS <1mg/L.
4. Membrane area: 8m2, advised gas-water ratio: 25:1~30:1.
5. Operating pressure: -0.01 ~ -0.03MPa.
Application:
1. Hotels, restaurants, sanitariums, hospitals.
2. Home communities, villages and towns
3. Stations, airports, harbors,
4. Factories,mines, troops, scenic spots,
5. Industrial organic sewage similar to municipal sewage.
advantages:
1.Save 50% occupying area compared with traditional system.
2.Relative high MLSS value(less than 15g/L)and long residue time for sludge(less than 60days).
3.Stable producing water quality for different inlet water.
4.Less sludge residue reduces cost for sludge treatment.
5.Low energy consumption, simple cleaning and low operation cost.
6.Simple installation ,high degree of automation, simple operation and maintenance, the whole set can be placed underground with auto-control
7.Anti-corrosion carbon steel, stainless steel and FRP structure , long service life
We are more than happy to help you with any inquiry. Call us or send us an email, and we'll be ready to assist you.
1.Q: Are you a factory or a trading company?
A: We are a factory and we have more than ten years of rich experience in manufacturing waste disposal equipment.
2.Q: Where is your factory? How do I get there?
A: Our factory is located at No. 1137, Zhucheng City, Shandong Province, China. about 2 hours away from Qingdao Airport. If necessary, we can pick you up and welcome to visit our factory.
3.Q: Do you have a minimum order quantity requirement?
A: There is no minimum order quantity, but if you order a large number of products, you can enjoy discounts.
4.Q: Do you have a certificate?
A: Yes, we have ISO and SGS certificates.
5.Q: Can you meet my special requirements for my products?
A: Yes, we have a professional design team. We can provide drawings according to your requirements.
6. Q: How to pay?
A: TT and L / C can be accepted, and TT will be preferred. Pay 30% deposit before production, and then pay 70% balance before loading with TT.
7. Q: What is the delivery time?
A: It depends on the order quantity. Generally speaking, the delivery time will be within 2 to 4 weeks.
8. Q: How to package products?
A: We use standard packaging. If you have special packaging requirements, we will package as required, but the cost will be paid by the customer.
9. Q: How to prevent equipment corrosion?
A: We use world-famous paints such as SigmaCoatings, PainBow, etc. More importantly, we strictly follow the standard process for painting.
10. Q: How do you manufacture equipment?
A: Our processing technology includes laser / plasma cutting, automatic welding, CNC cutting and bending.
11. Q: How to install the device after reaching the destination?
A: We will provide you with detailed illustrations. If necessary, we will send technicians to help you. However, visa fees, air tickets, accommodation, and wages will be paid by the buyer.
If you want to know more details about the product, please contact Donna!