Drying Machine, Dryer Machine, Drying Equipment manufacturer / supplier in China, offering Cement Rotary Drum Dryer, Sewage Sludge Dryer Manufacturer Direct Sales, Direct-Selling Mobile Dryer and so on.
Min. Order / Reference FOB Price | |
---|---|
1 Set | US $10001.00/ Set |
Local Area: | Zibo, Shandong, China |
---|---|
R&D Capacity: | OEM, ODM, Other |
Payment Terms: | LC, T/T, D/P, PayPal, WesternUnion, Small-amountpayment |
Application: | Construction, Chemical Industry, Mineral Operation |
---|---|
Certification: | CE, ISO |
Customized: | Customized |
Features of Our Lime Shaft Kiln Vertical
1.Super long and stablerunning periodwith the most advanced and reliable technology in the same industry;
2.Provide the professional overseas installation andcomplete after-sale services;
3.Over1000worldwide clients and over1600sets/units cases since 1997;
4.CE/ISO9001:2006/ISO14001/CCC;
5.Bearall of your costfor a site-view of our company after landing on China.
Introducing Our Lime Shaft Kiln Vertical
Our new type lime shaft kilRubber Machinery n vertical developed by our company has different series in capacity from 100TPD to 500TP,and got the advantages of lower investment, more environment friendly and more energy-saving, also the built-in intelligent control system could solve the problems of bad quality, high energy consumption, serious pollution, dusty condition, etc. Our new type vertical lime kiln has applications in many industries such as steel plant, chemical industry, electrolytic aluminum and we've got the positivStone Processing Machinery e feedbacks from our valued clients. We have built nearly 200 sets lime kilns in size of Φ5.3x26.5M(580m3) in China and over 30 sets in the South-east, South Asia, South America and Mid-east market, such as Indonesia, Vietnam, India, Colombia, Kazakhstan, Tajikistan and other countries. On the performance of energy consumption and environmental protection, we have acchieved the most developed technology in lime kiln of the world. With so many cases that have proved that our new type vertical lime kiln is the best choice in different industries. Our kiln has gotten good reputation and achieves the ratification from Chinese lime experts. In 2017, we are listed in "Technical guidance catalog of lime kiln in China", in the same year, our kiln becomes national key environmental protection practical technology demonstration project, which is the highest reputation in lime kiln.
Characteristics of kiln body structure
1.Kiln body was round, effective height of about 23.8 meters, the effeInstrument Box ctive diameter of 5.3 meters inside. The outer layer of the kiln body is a kiln shell with a steel structure.Three layers of 9 thermocouples are respectively arranged on the 3 different heights of the kiln body, and the temperature of the different regions of the kiln is respectively measured in order to adjust the temperature of the kiln in time. At the bottom of the kiln kiln bottom device is installed, the kiln bottom device comprises 6 nozzle, air supply to ensure combustion air throughout the kiln section of the uniform feeding, in addition to the installation of a discharging mechanism, to ensure the finished lime kiln in uniform discharge.2.With the PLC operation system .It can greatly reduce the labor intensity of the workers, and improve the quality of lime calcination by the way of feeding, mixing, calcination and ash discharging auto .3.Calcining principle of mixed burning shaft kiln.The solid fuel (coke or anthracite) is uniformly mixed with the qualified stone,are distributed by the rotary distributor in the kiln,Under the action of self gravity, through the pre-heat, calcination, cooling, and finally burned into qualified finished lime.In the calcination zone, the two secoPrinting Materials ndary air combustion of the coke or anthracite in the mixture and the cooling lime at the bottom of the kiln to produce heat, the temperature of the calcined belt is 1100 to 1250 degrees, and the lime is calcined.Due to the auxiliary combustion air pipe, ensure each point temperature is uniform, thus ensuring a uniform temperature of the kiln.
Process introduction of Our Lime Shaft Kiln Vertical
Limestone and coal are transported to the plant, after being sieved, this two kinds of material are mixed together with a fixed ratio, the mixture will be lifted to the top of lime kiln.When the limestone goes down in the kiln, it will be preheated by the gas from the bottom. The gas will be cooled by the raw limestone that the temperature of exhausted gas will be as low as 120ºC, so the heat can be reused very well. The thickness of kiln body is 1m,and the temperature of the kiln shell can be less than 40ºC, which is the minimum heat radiation performance. There are 4 thermocouples in total that are placed in different levels to monitor the calcination situation inside the kiln, and if there is any problem it will indicate it and give an alarm. The limestone will be fully calcinated when it falls down because our kiln has enough height to fulfill the calcination process. After calcination the lime will get cooled by the air from the bottom, the temperature of discharged lime can be less than 50ºC. So the heat brought by product also is reserved inside the kiln. This is the reason why our heat consumption can be as low as 850Kcal/kg. Then the waste gas will be treated by bag filter, so the emission will match the requirement of regulations. The system is operated in minus pressure, so there will not be any pollution in the plant.All the motors in procerss control will be controlled by frequency converter, it's very easy to operate in DCS control system.
All the system only need three person in one shift: one person for truck loader driver, one for DCS control operator and one for maintain patrol.Process flow
Design drawing of Our Lime Shaft Kiln VerticalRequirement of raw material of Our Lime Shaft Kiln Vertical
1.limestone
CaO≥53%
MgO≤1.5%
SiO2+Al2O3+Fe2O3≤4.5%
particle:50~100mm
2. coke(coal particle)
Fixed carbon≥85%
Volatile≤8%
ash≤8%
moisture≤10%
Particle size: 25~55mm
3. Performance index:
3.1 capacity:15t/h(for Φ5.3x26.5M(580m3) lime kiln);
3.2 heat consumption:≤ 850Kcal;
3.3 Total limestone decomposition rate:≥90%;
3.4 Kiln volume utilization coefficient:0.7-0.8t/m3;
3.5 Power consumption:≤16KW·h/t
3.6 lime active:≥320-360ml
3.8 emission:
Dust ≤30mg/Nm3,
SO2≤100mg/Nm3
• Latest Technology with 6 steps cleaning and cooling without direct water contact of coal gas
• Highest gasification efficiency of > 87 %
• Lowest gas producing and running cost per Kcal of output
• High Constant GCV of coal gas > 1400 Kcal / Nm3
• Clean Gas quality with tar and dust < 80 mg / Nm3
• Zero water discharge with the use of closed cycle cooling including air cooler and indirect cooler
• 100% Phenolic water reuse
• Tar produced is low-temperature with < 3% moisture and GCV > 11000 Kcal / kg.
• Tar sale can offset up to 25 % of coal cost.
• 100% automation with PLC and SCADA systems
• online Gas analysis
• Desulphurization for removing sulphur
Applications of Our Lime Shaft Kiln Vertical:
1.Steel plant;
2.Chemical industry;
3.Electrolytic aluminum.
FAQ:
Q: Can I visit your factory?
A: Yes. Many domestic and international customers visit our factory every year.And we will bear all of your cost after you landing on China.
Q: Do you provide after-sale service?
A: Yes. We have a professional after-sale service team to promptly and thoroughly solve your problems,and if necessary,we will send our special team to your place.
Q: Do you provide equipment operation training?
A: Yes. We will surely send professional engineers to the working site for equipment installation, adjustment, and operation training.
Q: Can you test our samples?
A: Yes.of course. You can send your samples to us for test and analysis.