Mechanical Hygrostat Humidity Controller High-Efficiency Mechanical Hygrostat thermostat NT 74-F
• Adjustable relative humidity
• Change-over contact
• High switching capacity
• Easily accessible terminals
• Clip fixing
The electromechanical hygrostat is designed to control enclosure heaters so that the dew point is raised when a critical
relative humidity of 65% is exceeded. In this way condensation and corrosion in enclosures with electric/electronic
components is effectively prevented.
Technical DataCERoHSISO9001Patent
NT 75-FSwitch temperature difference5K (-3/+2K tolerance)¹Sensor elementNTCContact typechange-over snap-action contactService life>100,000 cyclesMin. switching capacity10mAMax. switching capacityNC: 250VAC, 10 (4) A
NO: 250VAC, 5 (2) AMax. inrush currentAC 16A for 10 sec.Connection4-pole terminal, clamping torque 0.5Nm max.:
rigid/stranded² wire 2.5mm² (AWG 14)Mountingclip for 35mm DIN rail, EN 60715Casingplastic according to UL94 V-0, light greyDimensions67 x 50 x 38mmWeightapprox. 60gFitting positionvariableOperating/Storage temperature-20 to +60°C (-4 to +140°F)Operating/Storage humiditymax. 90% RH (non-condensing)Protection typeIP20
¹ at 50% RH
² When connecting with stranded wires, wire end ferrules must be used.
Examples of connection