China Medical Equipment Neonatal Care Device Infant Radiant Warmer

BNT-2000 Infant Radiant Warmer

STANDARD COMPOSITION:

Microcontroller control open type radiant warmer with manual and servo system

Display skin set facility, skin observed temperature in ºC and heat power separately

User friendly soft touch panel large and bright LED Display

Ceramic infrared heating element for effective warming

Audible and visual alarm facility for overheating beyond set temperature range,

probe failure,power failure, system failure and heater failure

Warmer will be sense the skin probe failure and cut off the heater

Warmer head will rotate and swivel in different direction

Inbuilt battery back- up during power failure

Keyboard locking facility to avoid unwanted user modification of the set parameter.

Height of the warmer will adjustable

Control panel will liquid proof and allow easy and hygienic disinfection

Intelligent alarms for patient safety

Large mattress, drop down side panels for easy access to new-born

Examination lamps for easy observation of new-born

TECHNICAL SPECIFICATIONS:

Observation Light :1000 Lux

Color Temperature range : 3700k to 5100k

Patient control ( baby mode ): 34°Cto 37.5°C in increments 0.1°C ( 95°F to 99.5°F )

Manual mode adjust heater output : 10 - 100% with 5% increment, auditory and visual alarm will give every 15 min.

Temperature measurement accuracy:± 0.3°C, resolution: ± 0.1°C, probe accuracy: ± 0.1°C

Warmer have with bassinet trolley. Mattress foam density25kg/cm³, transparent collapsible side wall, easy detachable for cleaning, mattress size : 20" x 28 "

Size of drop down5" (±1" ) mattress surface, 6mm thick, clear and transparent.

Bedheight about80 ~ 100cm from the floor and 80 ~ 90cm from the heat source.

The baby bed is crevice free for ease of cleaning, infection control and mattress used to be

biocompatible material.

Heater Element : 600 watts

Heater will cut off , if the maximum irradiance at any point of the mattress area exceeds a total irradiance level of 10mw/cm² or above 60% of the heater output ( between 10 to 30 min)

Bed tilt mechanism : -10-15°

Skin temperature probe size : ≤ 10mm dia3~ 4mm thick ( biocompatible), pliable probe wire and non-stiff

Castor wheels 2 are lockable

Ambient temperature : 10-40°C

Relative Humidity :15 - 90%

Power supply : 220-240VAC, 50Hz

ACCESSORIES:

1.Mattress-1 No.

2.IV pole-1 No.

3.Skin Probe-1 No.

4.X-ray cassette tray-1 No

5.Operational and service manual - 1 set each
Package: 110cmx90cmx110cm 1.1m3