China Medical fluid infusion warmer

Product DescriptionMedical fluid infusion warmer
Features:
1. Portable, easy to use
2. Over-temperature sound and light alarm and power automatically cut off, to avoid the occurrence of infusion overheating
3. No need to use special materials, cost savings.
4. Can be installed within 2 minutes
5. High-precision digital temperature control
6. Can reach the preset temperature in a short time


Infusion heaters using high-tech materials and high-precision thermostat control technology, the input liquid pre-indirect
heating, heated to the desired temperature, ease the infusion of cold liquid on the veterinary body caused by pain, chills,
vasospasm and other discomfort , To solve the pain of hypothermia infusion and a variety of complications, increase comfort and
drug absorption. The product is widely used in emergency rooms and wards, especially for autumn and winter seasons.

Clinically, if the temperature difference between the transfusion liquid and the vet blood is too large, it can cause the
patient's body to become chilly and cause various complications such as vasoconstriction, spasms, joint pains and stomachaches,
and even more serious and possibly life-threatening diseases. In particular, large-capacity, rapid infusion more serious.

Infusion heaters using advanced heating surface heating plate, making the heating quickly and evenly, advanced digital temperature
control technology to ensure accurate temperature control, heating body temperature accuracy of up to +0.5 ℃, heating liquid
temperature control temperature +1.0 ℃ , The display resolution of +0.1 ℃, the temperature figures show that the obvious, a simple
temperature adjustment so that operators will learn this product can adapt to a variety of infusion flow rate heating.
Infusion heaters to adapt to the flow rate of 40 to 80 drops / min ordinary liquid heating. The company is located in:
According to the information, short-term infusion of 1 unit of cold blood or 1 liter of room temperature crystal fluid can cause
the average body temperature dropped 0.25 ℃. Hypothermia can result in coagulation disorders, delayed wound healing, increased
risk of infection, increased length of hospital stay, slowed drug metabolism and severe cardiopulmonary conditions.
If the input liquid pre-indirect heating to reduce the temperature difference between the blood and the input liquid, can improve
the patient's mental state, eliminate a variety of complications, and can promote liquid dissolution of drugs is conducive to
absorption.

1, safe and reliable, unique over-temperature alarm function, multi-level power cut set;
2, small size, easy operation, suitable for all kinds of medical facilities, including surgical environment applications;
3, a variety of heating, can simultaneously heat a variety of isothermal infusion;
4, two types of products, respectively, to solve the operating room, senior ward and general out-patient infusion problems. The
company is located in:
5, electronic control, temperature control accuracy, accuracy up to ± 0.5 ℃;
6, high efficiency, rapid warming, transfusion can reach the desired temperature within a few seconds, per hour can be heated
liquid 4-16 liters;



Parameters:
- To adapt to the operating room, intensive care unit and other high medical infusion. Streamline shape, science and technology
leading uniform heating, temperature rapid digital temperature control, more accurate digital display, easy to operate

Transport and storage of environmental conditions
a) Ambient temperature: -40 ~ +40 ℃;
b) Relative humidity: ≤90%;

Product electrical safety classification: Ⅰ type B type
Input power ≤300W
Temperature range: 30 ℃ ~ 42 ℃
Adjustable control accuracy: set temperature ± 0.5 ℃
Display resolution: 0.1 ℃
Security features: 43 ℃ power automatically cut off
High demand infusion liquid heating



Operating environment conditions
a) Ambient temperature: -10 ~ 40 ℃;
b) Relative humidity: ≤70%;
c) Power: AC 220 + 10% V;
d) Frequency: 50 + 2% Hz.Related ProductsMain productsCompany ProfileThe FactoryOur CertificationExhibition&CustomerTransportation&PaymentFAQQ1. Can I have a sample order for led light?A: Yes, we welcome sample order to test and check quality. Mixed samples are acceptable.Q2. What about the lead time?A:Sample needs 3-5 days, mass production time needs 1-2 weeks for order quantity more than Q3. Do you have any MOQ limit for led light order?A: Low MOQ, 1pc for sample checking is availableQ4. How do you ship the goods and how long does it take to arrive?A: We usually ship by DHL, UPS, FedEx or TNT. It usually takes 3-5 days to arrive. Airline and sea shipping also optional.Q5. How to proceed an order for led light?A: Firstly let us know your requirements or application.Secondly We quote according to your requirements or our suggestions.Thirdly customer confirms the samples and places deposit for formal order.Fourthly We arrange the production.Q6. Is it OK to print my logo on led light product?A: Yes. Please inform us formally before our production and confirm the design firstly based on our sample.Q7: Do you offer guarantee for the products?A: Yes, we offer 1-2 years warranty to our products.Q8: How to deal with the faulty?A: Firstly, Our products are produced in strict quality control system and the defective rate will be less than 0.2%.Secondly, during the guarantee period, we will send new lights with new order for small quantity. For defective batch products, we will repair them and resend them to you or we can discuss the solution including re-call according to real situation.