Specifications
1. Membrane Switch Label
2.100% testing
3. High quality siliver ink
4. Screen printing
Technology
Operating voltage: 35V DC
Operating current: 100mA 1W
Contact resistance: < 100 Ohms
Open circuit resistance: ≥ 10MΩ At 100V
Operating temperature: Flat/metal dome: -20° C to +80° C
Storage temperature: Flat/metal dome: -40° Cto +80° C
Life expectancy Flat type≥ 5, 000, 000 times Tactile type≥ 1, 000, 000 times
Switch stroke: 0.1 to 0.6mm
Contact bounce: 5 to 30ms
Actuation force tolerance: +/- 20 to 45g
Tactile ratio: FC > 40%
Operating humidity: Up to 95% RH
Female, male connector, solder pins and heat seal connectors are available
Membrane Switch Design
Material
Polyester or Polycarbonate
Artwork Format
CorelDraw, Adobe Illustrator AI or EPS, AutoCAD Dwg or DXF
Tactile Feel
Is determined by the thickness of the overlayer. Normally between 0.06" -0.08".
Color Verification
Pantone Matching System;The Munsell Color System;Color Samples
Conductive Trace
Silver or Copper
Shielding
EMI/ESD/RFI can be employed.
Dome
Stainless Steel or Mylar
Actuation Force
Depend on customer's requirement. Normally between 30-600 grams.
Travel
Depend on customer's requirement. Normally between 0.010" - 0.020".
Life Cycle5 Million Cycles(up to)