Machine application:
This machine is applicable for centerless through-feed grinding of cylindrical and conical parts with high requirements on geometrical precision and surface quality and centerless in-feed grinding of cone with conicity less than 1:20 and the formed rotational parts. This machine is applicable for mass production.
Machine configuration & characteristics:
1. only reg. wheelhead feeding.
2. Single side supporting GW. spindle. Easy to change the wheel.
3. Multi-piece dynamic pressure bearing is used on GW. spindle.
4. Single side supporting RW. spindle. Easy to change the wheel.
5. Multi-piece sliding bearing is used on the RW. spindle.
6. AC converter motor regulates RW. Speed steplessly.
7. In-feed mechanism is equipped.
8. The cooling system is equipped with magnetic separator and paper filter.
Technical parameters:
Workpiece diameter:
Through-feed grinding (special order of0.5~20mm
work blade is necessary if OD.) <1.5mm
In-feeding 3~20mm
Max. length for jobs(standard workrest) 80mm
G.W. specificationPSA300x100x127mm R.W. specificationPSA200x100x127mm
G.W. speed 1920r/min
R.W. speed (stepless) 10~180r/min
R.W. swiveling angle
In vertical plane-1°~ +4°
In horizontal plane -1°~ +3°
One dial division of handwheel 0.001mm
In-feed stroke
Total stroke2.5mm
Rapid stroke 1.3~2.5mm
Slow stroke 0~1.20mm
The distance between the connecting155mm
line from GW. center to RW. center to
the bottom of workrest
Total power5.57kw
Machine overall dimension1800mmx2150mmx1350mm
(with electrical tank and coolant tank)
Net weight2000kg
Machining accuracy:
(standard testpiece Φ15x60mm, 45#steel)
Roundness0.001mmDia. consistency0.0012mmRoughnessRa0.16μm