China Mineral Processing Iron Ore Stone Hammer Crusher

1,General Introduction:
The Heavy Hammer Crusher is suitable for crushing minerals of various brittle materials, such as coal, gypsum, alum, brick, limestone, etc. The compressive strength of the material shall not exceed 1000 kgf / cm2, and the humidity shall not exceed 2%.
2,Working principle:
The main working parts of the heavy hammer crusher are: rotor, main shaft, disc, pin shaft and hammer. The motor drives the rotor to rotate at high speed in the crushing chamber, and the materials are crushed by the impact, shearing and grinding of the high-speed moving hammer. A sieve plate is arranged under the rotor of the heavy hammer crusher. By adjusting the sieve holes between the sieve plates, the materials can be controlled into three specifications: coarse, medium and fine. As the more advanced crushing equipment of hammer crusher, the heavy hammer crusher has the advantages of high efficiency, large output, small power, greatly saving manpower and material resources and reducing crushing cost.
3,Main features:
a. Applicable materials are widely used: hammer crusher series products are suitable for crushing all kinds of medium hardness and brittle materials, such as limestone, coal, salt, white Asia, gypsum, alum, brick, tile, gangue, etc. the compressive strength of the crushed materials is not more than 150 MPa, which can be widely used in cement, coal preparation, power generation, building materials, chemical industry, metallurgy and compound fertilizer industries.
b. Stable operation and good crushing effect: the design of the heavy hammer crusher is beautiful and compact, each part has been strictly screened and checked, which can realize long-term normal operation, and the crushing ratio is large, the particle size of the product is uniform, generally in cubic shape, without excessive crushing.
c. Reasonable hammer head design and high working efficiency: the heavy hammer crusher adopts high-quality and high-quality menggang, and through strict heat treatment process, it can obtain a single austenite structure. Its service life is more than five times longer than the original products such as manganese steel and rail, and its working efficiency is more than 30%.
d.High efficiency and energy saving of triple crushing: the crushing mode of the heavy hammer crusher is that the energy drives the hammer head to crack, the materials hit by the hammer head hit the impact plate at a high speed, and then the stones bounced back from the impact plate hit the materials hit by the hammer head again. There is a total of triple crushing force, but only the energy that drives the hammer head is consumed, so the heavy hammer crusher can be higher More efficient.
4,Equipment model

Model of Heavy Hammer CrusherModelFeeding granularity
(mm)Discharge particle size
(mm)Capacity
(m3/h)Power
(kw)Weight(t)Outline size
(mm)Pc350x200≤2000-252-55.50.6700x540x660Pc400x300≤3000-355-10110.8900x670x860Pc510x350≤3200-358-1518.51.21000x700x900Pc600x400≤4000-4010-22222.21200xx1050x1200Pc600x600≤4000-4015-30302.61300x1000x1250Pc800x600≤5000-4018-40553.11310x1180x1310Pc800x800≤6000-4025-45553.51440x1740x1410Pc1000x800≤6500-4025-50755.91600x1390x1575Pc1000x1000≤7000-4030-5513281800x1590x1775Pc1250x1250≤8000-4035-65180142060x1600x1890Pc1400x1400≤10000-4050-100280322365x1870x2220Pc1600x1600≤12000-40100-15048037.53050x2850x2800

5,Product Pictures