FEATURES:This machine is a multi-purpose machine tool of bench type.It is mainly used to lathe,drill and mill,which is controlled by two motor.Wider of work scope and power feed on longitudinal or cross etc.360°rotation in vertical plane.SPECIFICATIONS: DGN900HSTANDARD EQUIPMENTSwing over bed: 300mm 12 "160mm 3 jaw chuckMax.length of workpiece: 990mm 39"200mm 4 jaw chuck Swing diameter over tool carrier: 140mm 5.5"200mm face plateSpindle bore: 38mm 1.5" Dead centers 5#. 3#Taper of hole in spindle morse:MT#5WrenchsMax.longitudinal storke over tool carrier: 80mm 3" 1/2" Drill chuckMetric thread kinds on processing:12Tapered driftMetric thread pitch on processing: 0.5-3mmPull rodInch thread kinds on processing: 20Machine standInch thread pitch on processing:11-40TPIChange gearMax.stroke on taper hole:80mm 3"Steady restTaper of hole in tailstock:MT#3 Follow rest XSpindle speed scope:250-1600RPM Threading dial Lathe motor size:1.1kw 220v single-phaseFour-way tool postXMax.drilling capacity :15mm 0.6" Distance from bench to spindle nose: 250-380mm 10"-15" OPTIonAL ACCESSORIESDistance between spindle center and the surface of column:400mm 15.5"Face mill cutter Swivel-angle of the milling and drilling headstock around the column:360Live centerMilling-drilling headstock vertical stroke:130mm 5"Chuck guard & leadscrew coverMilling spindle speed step:9 Milling spindle speed scope: 315-2000RPM Bench dimension : 425x200mm 16.5"x7.5" Taper of hole in milling spindle morse: MT#3 Stroke on milling spindle hole: 127mm 5" Mill/drill motor size: 0.55kw 220v.single-phase Net weight : 410kg 903lbs Overall dimension : 1860x830x1110mm 73.3"x32.7"x43.7"