China Mini Paint Film Coating Thickness Gauge Meter Thickness Meter Equipment Painting Thickness Tes

Mini Paint Film Coating Thickness Gauge meter thickness meter equipment painting thickness tester
EC-500A/EC-500
These gauges can be used for non-destructive coating thickness measurement of non-magnetic coatings, e.g. paint, enamel, chrome on steel, and insulating coatings, e.g. paint and anodizing coatings on non-ferrous metals.

· High accuracy and stability
· LCD shows number, mean, maximum, minimum
· Easy to do zero calibration
· Power off automatically
· Low battery indication
· Detect the substrates type automatically

· metalwork · Automobile Works · Used Car Market
· Foil Manufacturer · Industrial Lacquer · Paper Mill

ModelEC-500EC-500FEC-500NProbeF-Probe & N-ProbeF-ProbeN-ProbeMeasuring PrincipleMagnetic induction & Eddy CurrentsMagnetic inductionEddy CurrentsMeasuring Range0 to 1500umAccuracy± (2%+1um)Resolution0~99.9(0.1um) 100um~999um(1um) 1000um~1500um(0.01mm)
0mils~3.933mils (0.004mils), 3.934mils~39.39mils (0.01mils), 39.4mil~51.2mil (0.1mil)CalibrationOne point to four point calibration, zero point calibrationData GroupOne direct group(readings not be stored to memory)
Four general groups (readings will be stored automatically)
NOTE: each group have individual statistics, alarm limit settings and calibrationStatisticsNo. of readings, mean, minimum, maximum and standard deviationUnitsum, mm, milAlarmUser can set the high/low alarm limit; Alarm icon displayed on LCD when over the limitMinimum Curvature Radius Convex1.5mmMinimum Curvature Radius Concave25mmMinimum Measuring AreaDiameter 6mmMinimum Thickness Of SubstrateF-probe: 0.5mm(0.02");N-probe: 0.3mm(0.012")0.5mm(0.02")0.3mm(0.012")Maximum Measuring RateTwo readings per secondComputer InterfaceDownload data via USBPower SupplyTwo 1.5V AAA batteryOperation EnvironmentTemperature: 0 to 40°C(32 to 104°F); Humidity: 20% to90%RHStorage EnvironmentTemperature: -20 to 70°C(-4 to 158°F)Standard CertificationROHS ;WEEE;CEDimensions110mm*53mm*24mm(4.33"*2.09"*0.94")Case Material And WeightABS; 92g(3.24 oz)

1. Is the measuring error large?
• Enter the menu interface, clear the calibration data; shut down torestore the factory configuration steps; do zero calibration after booting, (Note: you need to dozero calibration on the customer's own substrate)
2. Does the measurement screen display overflow?
•The coating thickness exceeds the measurement range.
•There is an error and zero calibration is required on the substrate.
•Probe fault
3. Measurement no response?
•Check if the battery has power.
•The probe has a fault.
•Whether the measured material meets the measurement principle.
4. Does the measurement show a negative number?
•It is judged according to the customer's materials whether the machine accuracy is applicable.
•The calibration did not do well and needs to be recalibrated.
5. During the measurement process, is it sometimes display F, sometimes display N?
• The automatic mode undistinguishable the type of material and it requires manual switching of the measurement principle.
6. How to do calibration?
•Please refer to the zero calibration, point calibration step.
7. Long press "ZERO" does not respond?
• You need to restore the factory settings and then operate.
8. It can measurement but there is no reading, why?
•Confirm whether the mode is in continuous measurement mode
•Check if the beep is broken

From raw materials to final products, we have a strict quality control system. Our defective rate is about 0.1%. Our staff is well-trained and educated in this industry, we will save money in the end because of our efficiency and know-how. We have been in business for 10 years and thanks to our R&D department, we always catch the latest trend in the market. With the required certificate and experience after-sales service, there was no issue in the shipment we have arranged. We have rich experience in handling orders for heavy buyers with the professional process. • Stable raw material purchasing
• Favorable order follow-up management
• Laudable lead-time & shipment control
• Traceable quality evaluation
• Flexible payment terms
• Remarkable after-sale service
6. Innovative testing technology is always pursued and to do.
• We are first to create the LED display rotated and red backlight alarm in the world.
• We are the first one create menu operations for coating thickness gauges in China.
• Software: Dgraph can be so easily used to set up, download data, view graph and output reports.