China Mitsubishi Automation China Sales Service Center Fx3u-485-Bd Fx3u-4ad-PT-ADP Fx3u-64mr-Es-a Fx3u-32mr-Es-a Fx3u-128mr-Es-Afx3u-80mr-Es-Afx3u-64m

Rich features and flexible system configuration in a compact size.

The MELSEC-F series PLC incorporates power supply, CPU, and I/Os into a single compact unit.
Meets the needs of a variety of user applications with options for I/O, analog, positioning, and open network expansion.

High functionality model (FX3U/FX3UC)

Faster, friendlier. Realize high expandability and high functionality.
Fom high speed control to network support and even logging is possible.
FX3 series flagship model FX3U and connector type FX3UC: 2 models are available.

Standard model (FX3G/FX3GC)

More advanced control for auotmation and networking.
Equipped with functions required for standard controls, and fit for various purposes.
Compact sized with the same performance, FX3GC is also available.

Basic model (FX3S)

Easy introduction to machine automation.
Simple functions and economical price in one package.
A basic micro PLC with expandability for analog and communication functions.

FX series I/O extension devices are divided into "extension blocks" and "powered extension units".
"Powered extension units" have built-in power supply and also extend I/O at the same time.
"Extension blocks" adjust the I/O of the main unit or powered extension units in 8 point or 16 point units.

Extension units

Powered extension units are I/O extension devices with built-in power supply.
Like with the main unit, various I/O devices and special devices can be connected after a powered extension unit.

ModelTotal number
of pointsNumber of input/output points
Input/output typeApplicable FX PLCInputOutputFX
3SFX
3GFX
3UFX
3GCFX
3UCAC Power Type
FX2N-32ER32 points16 points24 V DC
(sink)16 pointsRelayx○○xxFX2N-32ER-ES/UL24 V DC
(sink/
source)FX2N-32ES24 V DC
(sink)TriacFX2N-32ET24 V DC
(sink)Transistor
(sink)FX2N-32ET-ESS/UL24 V DC
(sink/
source)Transistor
(source)
FX2N-48ER48 points24 points24 V DC
(sink)24 pointsRelayx○○xxFX2N-48ER-ES/ULDC24V
(sink/
source)FX2N-48ET24 V DC
(sink)Transistor
(sink)FX2N-48ET-ESS/UL24 V DC
(sink/
source)Transistor
(source) FX2N-48ER-UA1/UL48 points24 points100 V AC24 pointsRelayx○○xxDC Power Type
FX2N-48ER-D48 points24 points24 V DC
(sink)24 pointsRelayx○○xxFX2N-48ER-DS24 V DC
(sink/
source)FX2N-48ET-D24 V DC
(sink)Transistor
(sink)FX2N-48ET-DSS24 V DC
(sink/
source)Transistor
(source)

Regarding connection cable
A connection cable (length: 55mm), used to connect to the the right side of the device in front of the powered extension unit, is included with the powered extension unit. To extend the distance of the connection, please use the optional "extension cable".

page topFunction expansion board

The expansion board is designed to add the input and output terminal whose points are small to FX3S or FX3G PLCs. The board can be built in the PLC.

ModelTotal
number
of
pointsNumber of input/output points
Input/output typeApplicable FX PLCInputOutputFX
3SFX
3GFX
3UFX
3GCFX
3UC
FX3G-4EX-BD4
points4
points24 V DC
(sink/
source)--*1
○
Max.
1 unit*2
○
Max.
1 unitxxx
FX3G-2EYT-BD2
points--2
pointsTransistor
(sink/
source)*1
○
Max.
1 unit*2
○
Max.
1 unitxxx

*1: Supported by FX3S ver.1.10 and later.
*2: Supported by FX3G ver.2.20 and later.

page topExtension blocks

Extension block is an I/O extension device that receives power from the main unit or powered extension unit.
It can be connected in 8 point or 16 point units. The connectable number of points is determined by each main unit or powered extension unit

ModelTotal number
of pointsNumber of input/output points
Input/output typeApplicable FX PLCInputOutputFX
3SFX
3GFX
3UFX
3GCFX
3UCInput/output extension blocks
FX2N-8ER8 points4 points
(8 devices
are occupied.)24 V DC
(sink)4 points
(8 devices
are occupied.)Relayx○○*1
*2
○*1
*2
○FX2N-8ER-ES/ULDC24V
(sink/
source)FX2N-8EX8 points24 V DC
(sink)--FX2N-8EX-ES/ULDC24V
(sink/
source)FX2N-8EX-UA1/UL100 V AC
FX2N-16EX16 points16 points24 V DC
(sink)x○○*1
*2
○*1
*2
○FX2N-16EX-ES/UL24 V DC
(sink/
source)FX2N-16EX-C
Connector input24 V DC
(sink)FX2N-16EXL-C
Connector input5 V DCOutput extension blocks
FX2N-8EYR8 points--8 pointsRelayx○○*1
*2
○*1
*2
○FX2N-8EYR-ES/ULFX2N-8EYR-S-ES/ULRelay
(8 points/common)FX2N-8EYTTransistor
(sink)FX2N-8EYT-HFX2N-8EYT-ESS/ULTransistor
(source) FX2N-16EYR16 points16 pointsRelayx○○*1
*2
○*1
*2
○FX2N-16EYR-ES/ULFX2N-16EYSTriacFX2N-16EYTTransistor
(sink)FX2N-16EYT-ESS/ULTransistor
(source)FX2N-16EYT-C
Connector outputTransistor
(sink)

*1 :For connection to FX3GC or FX3UC, FX2NC-CNV-IF or FX3UC-1PS-5V is required.
*2 :Depending on the model name of the main unit, I/O extension device connection may or may not be allowed. For details, refer to the manual of the main unit.

Regarding connection cable
A connection cable, used to connect to the right side of the device in front of the extension block, is included with the extension block.
To extend the distance of the connection, please use the optional "extension cable (FX0N-30EC/FX0N-65EC)" and "connector conversion adapter (FX2N-CNV-BD)".

page topExtension block for connector type main unit (FX3GC, FX3UC)

These I/O extension devices can be directly connected to FX1NC, FX3GC, FX2NC, FX3UC PLCs.
They can be compactly extended because connection cables are not needed.

ModelTotal number
of pointsNumber of input/output points
Input/output typeApplicable FX PLCInputOutputFX
3SFX
3GFX
3UFX
3GCFX
3UCInput extension blocks FX2NC-16EX-T
Terminal block input16 points16 points24 V DC
(sink)--xxx*
○*
○FX2NC-16EX-T-DS
Terminal block inputDC24V
(sink/
source) FX2NC-16EXDC24V
(sink)FX2NC-16EX-DSDC24V
(sink/
source)FX2NC-16EX-D/ULDC24V
(sink) FX2NC-32EX32 points32 points24 V DC
(sink)FX2NC-32EX-DSDC24V
(sink/
source)FX2NC-32EX-D/ULDC24V
(sink)Output extension blocks FX2NC-16EYR-T
Terminal block Output16 points--16 pointsRelayxxx*
○*
○FX2NC-16EYR-T-DS
Terminal block output FX2NC-16EYTTransistor
(sink)FX2NC-16EYT-DSSTransistor
(source)FX2NC-16EYT-D/ULTransistor
(sink) FX2NC-32EYT32 points32 pointsTransistor
(sink)FX2NC-32EYT-DSSTransistor
(source)FX2NC-32EYT-D/ULTransistor
(sink)Input/output extension blocks FX2NC-64ET64 points32 points24 V DC
(sink)32 pointsTransistor
(sink)xxx*
○*
○

*: Depending on the model name of the main unit, I/O extension device connection may or may not be allowed. For details, refer to the manual of the main unit
By using analog input blocks and output blocks, analog quanties (voltage, current, etc.) can be input or output.
Analog control, which is indispensable in FA control, can be easily realized with PLC.

Analog expansion board (A/D conversion, D/A conversion)

Model
(Number of channels)Input specificationsApplicable FX PLCItemInput voltageInput currentFX
3SFX
3GFX
3UFX
3GCFX
3UCFX3G-2AD-BD
(Input 2 ch)Input
range0 to 10 V DC
(Input resistance 198.7 kΩ)4 to 20 mA DC
(Input resistance 250 Ω)*3
○
Max.
1 unit*1*2
○
Max.
2 unitsxxxResolution2.5 mV
(10 V/4000)8 μA
{(20 - 4 mA)/2000}FX3G-1DA-BD
(Output 1 ch)Output
range0 to 10 V DC
(External load resistance value
2 kΩ to 1 MΩ)4 to 20 mA DC
(External load resistance value
500 Ω or less)*3
○
Max.
1 unit*1*2
○
Max.
2 unitsxxxResolution2.5 mV
(10 V/4000)8 μA
{(20 - 4 mA)/2000}

*1: Supported by FX3G ver. 1.10 and later.
*2: FX3G 14pt, 24pt models: 1 board. 40pt, 60pt models: 2 boards.
*3: Function expansion board and FX3S-CNV-ADP cannot be used together.

page topMixed Analog Input/Output (A/D conversion, D/A conversion)

Model
(Number of channels)Input/output specificationsApplicable FX PLCItemInput/output voltageInput/output currentFX
3SFX
3GFX
3UFX
3GCFX
3UCFX3U-3A-ADP
(Input 2 ch)
(Output 1ch)Input
range0 to 10 V DC
(Input resistance
198.7 kΩ)4 to 20 mA DC
(Input resistance 250 Ω)*7
○
Max.
1 unit*1*6
○
Max.
2 units*2
○
Max.
4 units○
Max.
2 units*3
○
Max.
4 unitsOutput
range0 to 10 V DC
(External load resistance value
5 kΩ to 1 MΩ)4 to 20 mA DC
(External load resistance value
500 Ω or less)Resolution[Input voltage]
2.5 mV (10 V/4000)
[Output voltage]
2.5 mV (10 V/4000)[Input current]
5 μA (16 mA/3200)
[onput current]
4 μA (16 mA/4000)FX2N-5A
(Input 4 ch)
(Output 1ch)Input
range-100 to 100 mV DC
-10 to 10 V DC
(Input resistance 200 kΩ)-20 to 20 mA DC
4 to 20 mA DC
(Input resistance 250 Ω)xx○
Max.
8 unitsx*4*5
○
Max.
8 unitsOutput
range-10 to 10 V DC
(External load resistance value
2 kΩ to 1 MΩ)0 to 20 mA DC,
4 to 20 mA DC
(External load resistance value
500 Ω or less)Resolution50 μV
(at ±100 mV)
312.5 μV
(at ±10 V)1.25 μA,10 μA
((depending on
mode used))

*1: Supported by FX3G ver.1.20 and later. For connection to FX3G, FX3G-CNV-ADP is required.
*2: Supported by FX3U ver.2.61 and later. For connection to FX3U, function expansion board is required.
*3: Supported by FX3UC ver.2.61 and later. When connecting to FX3UC-32MT-LT(-2), function expansion board is required.
*4: When connecting to FX3UC, FX2NC-CNV-IF or FX3UC-1PS-5V is required.
*5: FX3UC-32MT-LT(-2): 7 units. FX3UC-**MT/D, FX3UC-**MT/DSS, FX3UC-16MR/D(S)-T: 8 units.
*6: FX3G 14 pt, 24 pt models: 1 board. 40 pt, 60 pt models: 2 boards.
*7: For connection to FX3S, FX3S-CNV-ADP is required.

page topAnalog Input (A/D conversion)

Model
(Number of channels)Input specificationsApplicable FX PLCItemInput voltageInput currentFX
3SFX
3GFX
3UFX
3GCFX
3UCFX3S-30MR/ES-2AD
FX3S-30MT/ES-2AD
FX3S-30MT/ESS-2AD
(Input 2ch)Input
range0 to 10 V DC
(Input resistance 115.7 kΩ)------Resolution10 mV
(10 V/1000)-FX2N-2AD
(Input 2 ch)Input
range0 to 10 V DC,
0 to 5 V DC
(Input resistance 200 kΩ)
The input characteristic is the same for each channel.4 to 20 mA DC
(Input resistance 250 Ω)
The input characteristic is the same for each channel.xx○
Max.
8 unitsx*1*2
○
Max.
8 unitsResolution2.5 mV
(10 V x 1/4000)
1.25 mV
(5 V x 1/4000)4 μA
((20 - 4 mA) x 1/4000)FX3U-4AD
(Input 4ch)Input
range-10 to 10 V DC
(Input resistance 200 kΩ)-20 to 20 mA DC,
4 to 20 mA
(Input resistance 250 Ω)xx○
Max.
8 unitsx*1*2
○
Max.
8 unitsResolution0.32 mV
(20 V x 1/64000)1.25 μA
(40 mA x 1/32000)FX3U-4AD-ADP
(Input 4ch)Input
range0 to 10 V DC
(Input resistance 194 kΩ)4 to 20 mA DC
(Input resistance 250 Ω)*8
○
Max.
1 unit*4*3
○
Max.
2 units*5
○
Max.
4 units○
Max.
2 units*5*6
○
Max.
4 unitsResolution2.5 mV
(10 V/4000)10 μA
(16 mA/1600)FX3UC-4AD
(Input 4ch)Input
range-10 to 10 V DC
(Input resistance 200 kΩ)4 to 20 mA DC,
-20 to 20 mA DC
(Input resistance 250 Ω)xxxx*7*2
○
Max.
8 unitsResolution0.32 mV
(20 V x 1/64000)
2.50 mV
(20 V x 1/8000)1.25 μA
(40 mA x 1/32000)
5.0 μA
(40 mA x 1/8000)FX2N-8AD
(Input 8 ch)Input
range-10 to 10 V DC
(Input resistance 200 kΩ)4 to 20 mA DC
-20 to 20 mA DC
(Input resistance 250 Ω)xx○
Max.
8 unitsx*1*2
○
Max.
8 unitsResolution0.63 mV
(20 V x 1/32000)
2.50 mV
(20 V x 1/8000)2.5 μA
(40 mA x 1/16000)
2 μA
(16 mA x 1/8000)
5.0 μA
(40 mA x 1/8000)
4 μA
(16 mA x 1/4000)

*1: When connecting to FX3UC, FX2NC-CNV-IF or FX3UC-1PS-5V is required.
*2: FX3UC-32MT-LT(-2): 7 units. FX3UC-**MT/D, FX3UC-**MT/DSS, FX3UC-16MR/D(S)-T: 8 units.
*3: FX3G 14pt, 24pt models: 1 board. 40pt, 60pt models: 2 boards.
*4: When connecting to FX3G, FX3G-CNV-ADP is required.
*5: When connecting to FX3U, function expansion board is required.
*6: FX3UC-32MT-LT supported from version 1.20 or later.
*7: FX3UC-32MT-LT supported from version 1.30 or later.
*8: When connecting to FX3S, FX3S-CNV-ADP is required.

page topAnalog Output (D/A conversion)

Model
(Number of channels)Output specificationsApplicable FX PLCItemOutput voltageOutput currentFX
3SFX
3GFX
3UFX
3GCFX
3UCFX2N-2DA
(Output 2 ch)Output
range0 to 10 V DC,
0 to 5 V DC
(External load resistance value
2 kΩ to 1 MΩ)4 to 20 mA DC
(External load resistance value
400 Ω or less)xx○
Max.
8 unitsx*1*2
○
Max.
8 unitsResolution2.5 mV
(10 V x 1/4000)
1.25 mV
(5 V x 1/4000)4 μA
((20 - 4) mA x 1/4000)FX3U-4DA
(Output 4 ch)Output
range-10 to 10 V DC
(External load resistance value
1 kΩ to 1 MΩ)0 to 20 mA DC
4 to 20 mA DC
(External load resistance value
500 Ωor less)xx○
Max.
8 unitsx*1*2
○
Max.
8 unitsResolution0.32 mV
(20 V x 1/64000)0.63 μA
(20 mA x 1/32000)FX3U-4DA-ADP
(Output 4 ch)Output
range0 to 10 V DC
(External load resistance value
5 kΩ to 1 MΩ)4 to 20 mA DC
(External load resistance value
500 Ω or less)*7
○
Max.
1 unit*3*4
○
Max.
2 units*5
○
Max.
4 units○
Max.
2 units*5*6
○
Max.
4 unitsResolution2.5 mV
(10 V/4000)4 μA
(16 mA/4000)

*1: When connecting to FX3UC, FX2NC-CNV-IF or FX3UC-1PS-5V is required.
*2: FX3UC-32MT-LT(-2): 7 units. FX3UC-**MT/D, FX3UC-**MT/DSS, FX3UC-16MR/D(S)-T: 8 units.
*3: FX3G 14 pt, 24 pt models: 1 board. 40 pt, 60 pt models: 2 boards.
*4: When connecting to FX3G, FX3G-CNV-ADP is required.
*5: When connecting to FX3U, FX3UC-32MT-LT(-2), function expansion board is required.
*6: FX3UC-32MT-LT supported from version 1.20 or later.
*7: When connecting to FX3S, FX3S-CNV-ADP is required.
Using high speed counters, high speed signals from encoder ans sensors can be counted.
Because FX PLC has built-in high performance high speed counters, high speed control is possible with a simple program. A high speed counter block with hardware comparator is also available.

High speed counter block/adapter

Model
(Number of channels)TypeHighest response
frequencyHardware comparison
output function2-phase counter
edge count functionApplicable FX PLCFX
3SFX
3GFX
3UFX
3GCFX
3UCFX2N-1HC
(1ch)1-phase
1-countMax. 50 kHz○-xx○
Max.
8 unitsx*2*3
○
Max.
8 units1-phase
2-countMax. 50 kHz2-phase
2-count1 edge count:
Max. 50 kHz
2 edge count:
Max. 25 kHz
4 edge count:
Max. 12.5 kHz○FX3U-2HC
(2ch)1-phase
1-countMax. 200 kHz○-xx○
Max.
8 unitsx*2
○
Max.
4 units1-phase
2-countMax. 200 kHz2-phase
2-count1 edge count:
Max. 200 kHz
2 edge count:
Max. 100 kHz
4 edge count:
Max. 50 kHz○FX2NC-1HC
(1ch)1-phase
1-countMax. 50 kHz○-xxxx*3
○
Max.
8 units1-phase
2-countMax. 50 kHz2-phase
2-count1 edge count:
Max. 50 kHz
2 edge count:
Max. 25 kHz
4 edge count:
Max. 12.5 kHz○FX3U-4HSX-ADP
(4ch)1-phase
1-countMax. 200 kHzx○xx*1
○
Max.
2 unitsxx1-phase
2-countMax. 200 kHz2-phase
2-count1 edge count:
Max. 100 kHz
4 edge count:
Max. 100 kHz

*1: When used together with analog or communication adapters, function expansion board is required.
*2: When connecting to FX3UC, FX2NC-CNV-IF or FX3UC-1PS-5V is required.
*3: FX3UC-32MT-LT(-2): 7 units. FX3UC-**MT/D,FX3UC-**MT/DSS,FX3UC-16MR/D(S)-T: 8 units.

page topBuilt-in high speed counter function (high speed input adapter function)FX3S Series PLC

TypeCounter No.
Highest
response
frequency*Max. response
frequency when
high speed processing
instruction is used*Supported high speed processing instructionsHigh
speed
counter
move2 phase
counter
multi-
count
functionFX3U-4HSX-ADP
max. response
frequency
(FX3U only)When
high speed
comparison
SET/RESET
is usedWhen
high speed
band
comparison
HSZ
is usedHigh
speed
comparison
SETHigh
speed
comparison
RESETHigh
speed
band
comparisonCounter
interruptHigh
speed
table
comparison1-
phase
1-
countC235,
C236,
C241
Max. 2pts:
Max. 60 kHzoverall frequency
60 kHz○○○xxx-xC237 to C240,
C242 to C245
Max. 4pts:
Max. 10 kHz1-
phase
2-
countC246
Max. 1pt:
Max. 60 kHzC247,
C248,
C248(OP)
C249,
C250
Max. 2pts:
Max. 10 kHz2-
phase
2-
countC251
Max. 1pt:
Max. 30 kHzxC252,
C253,
C253(OP)
C254,
C255
Max. 2pts:
Max. 5 kHz

*: Regarding high speed counter reponse frequency, the overall frequency is limited. For details, please refer to the programming manual.

FX3G, FX3GC Series PLC

TypeCounter No.
Highest
response
frequency*Max. response
frequency when
high speed processing
instruction is used*Supported high speed processing instructionsHigh
speed
counter
move2 phase
counter
multi-
count
functionFX3U-4HSX-ADP
max. response
frequency
(FX3U only)When
high speed
comparison
SET/RESET
is usedWhen
high speed
band
comparison
HSZ
is usedHigh
speed
comparison
SETHigh
speed
comparison
RESETHigh
speed
band
comparisonCounter
interruptHigh
speed
table
comparison1-
phase
1-
countC235,
C236,
C238,
C239,
C241
Max. 4pts:
Max. 60 kHzoverall
frequency
60 kHz○○○xxx-xC237,
C240,
C242 to C245
Max. 2pts:
Max. 10 kHz1-
phase
2-
countC246,
C248(OP)
Max. 2pts:
Max. 60 kHzC247 to C250
Max. 2pts:
Max. 10 kHz2-
phase
2-
countC251,
C253(OP)
Max. 2pts:
Max. 30 kHzxC252 to C255,
C254(OP)
Max. 2pts:
Max. 5 kHz

*: Regarding high speed counter reponse frequency, the overall frequency is limited. For details, please refer to the programming manual.

FX3U, FX3UC Series PLC

TypeCounter No.
Highest
response
frequency*Max. response
frequency when
high speed processing
instruction is used*Supported high speed processing instructionsHigh
speed
counter
move2 phase
counter
multi-
count
functionFX3U-4HSX-ADP
max. response
frequency
(FX3U only)When
high speed
comparison
SET/RESET
is usedWhen
high speed
band
comparison
HSZ
is usedHigh
speed
comparison
SETHigh
speed
comparison
RESETHigh
speed
band
comparisonCounter
interruptHigh
speed
table
comparison1-
phase
1-
countC235 to C240
Max. 6pts:
Max. 100 kHz40 kHz40-
(Number
of times of
use of instruction)○○○○○○-200kHzC244(OP),
C245(OP)
Max. 2pts:
Max. 10 kHz10 kHz200 kHzC241 to C245
Max. 3pts:
Max. 40 kHz40 kHz-1-
phase
2-
countC246,
C248(OP)
Max. 2pts:
Max. 100 kHz40 kHz200 kHzC247 to C250
Max. 2pts:
Max. 40 kHz40 kHz-2-
phase
2-
countC251,
C253
Max. 2pts:
Max. 50 kHz
(1 edge count, 4 edge count)1 edge count40 kHz○100 kHz4 edge count10 kHz(40-
Number
of times of
use of
instruction)÷4C252,
C253(OP),
C254,
C255
Max. 2pts:
Max. 40 kHz1 edge count40 kHz40-
(Number
of times of use of instruction)-4 edge count10 kHz(40-
Number
of times of
use of
instruction)÷4

*: Regarding high speed counter reponse frequency, the overall frequency is limited. For details, please refer to the programming manual.

Variety of functions

Built-in high speed counter numbers and allocation

Maximum frequency that the PLC can process

High speed comparison results can be obtained by a simple program and no calculation delay

FX3U, FX3U PLC counter mod
The FX series offers low cost PLCs with built-in positioning instructions and pulse output blocks that can perform wide-ranging positioning control.
Additionally, dedicated positioning modules for complex control and multi-axis, interpolation control are also available

High-speed output special adapter

ModelNumber of
controlled axisMaximum
frequencyApplicable FX PLCFX
3SFX
3GFX
3UFX
3GCFX
3UC FX3U-2HSY-ADPIndependent two axes200kHzxx*
○
Max.
2 unitsxx

*: When used together with analog or communication adapters, function expansion board is required

page topPulse output block

ModelNumber of
controlled axisMaximum
frequencyApplicable FX PLCFX
3SFX
3GFX
3UFX
3GCFX
3UC FX3U-1PGIndependent one axis200kHzxx*3
○
Max.
8 unitsx*1*3
○
Max.
6 units FX2N-10PGIndependent one axis1MHz(1 Hz to 1 MHz
differential line driver output)xx○
Max.
8 unitsx*1*2
○
Max.
8 units

*1: When connecting to FX3UC, FX2NC-CNV-IF or FX3UC-1PS-5V is required.
*2: FX3UC-32MT-LT(-2): 7 units. FX3UC-**MT/D,FX3UC-**MT/DSS,FX3UC-16MR/D(S)-T: 8 units.
*3: FX3U, FX3UC supported from version 2.20 or later.

page topSSCNET

ModelNumber of
controlled axisMaximum
frequencyApplicable FX PLCFX
3SFX
3GFX
3UFX
3GCFX
3UC FX3U-20SSC-HTwo axes
(Independent/Simultaneous)-xx○
Max.
8 unitsx*1*2
○
Max.
8 units

*1: When connecting to FX3UC, FX2NC-CNV-IF or FX3UC-1PS-5V is required.
*2: FX3UC-32MT-LT(-2): 7 units. FX3UC-**MT/D,FX3UC-**MT/DSS,FX3UC-16MR/D(S)-T: 8 units.

page topPositioning dedicated unit

ModelNumber of
controlled axisMaximum
requencyApplicable FX PLCFX
3SFX
3GFX
3UFX
3GCFX
3UC FX2N-10GMIndependent one axis200kHzxx○
Max.
8 unitsx*1*2
○
Max.
8 units FX2N-20GMTwo axes
(Independent/Simultaneous)200kHz

*1: When connecting to FX3UC, FX2NC-CNV-IF or FX3UC-1PS-5V is required.
*2: FX3UC-32MT-LT(-2): 7 units. FX3UC-**MT/D,FX3UC-**MT/DSS,FX3UC-16MR/D(S)-T: 8 units.

page topFor FX2N-10GM/FX2N-20GM positioning teaching panel

ModelProductE-20TP-SET0
(with E-20TP-CAB0)FX2N-10GM, FX2N-20GME-20TP-E-SET0
(with E-20TP-CAB0)

page topAngle control unit

ModelNumber of
controlled axisMaximum
frequencyApplicable FX PLCFX
3SFX
3GFX
3UFX
3GCFX
3UC FX2N-1RM-SET*1One axis720 divisions/rotation (0.5 degree)
or 360 divisions/rotation (1 degree)xx○
Max.
3 unitsx*2*3
○
Max.
3 unitsFX2N-1RM-E-SET*1

*1: FX2N-1RM-SET is a Japanese domestic only product. For use overseas, please select FX2N-1RM-E-SET, which supports overseas standards.
*2: Extension cable cannot be used.
*3: When connecting to FX3UC, FX2NC-CNV-IF or FX3UC-1PS-5V is required.

page topPLC built-in pulse output functions and positioning functions

ItemsFX3SFX3G,FX3GCFX3U,FX3UCNumber of axisTwo axes[FX3G]
Two axes (14/24 points)
Three axes (40/60 points)
[FX3GC]
Two axesThree axesNumber of controlled axisIndependent two axes[FX3G]
Independent two axes (14/24 points)
Independent three axes (40/60 points)
[FX3GC]
Independent two axesIndependent three axesMaximum frequency100 kHz100 kHz100 kHzProgramming languagesSequence programsSequence programsSequence programsCompatible main unitTransistor
output type
main unitTransistor
output type
main unitTransistor
output type
main unitPulse
output instructionPulse Y Output
(PLSY)○○○Acceleration/Deceleration Setup
Pulse Y Output
(PLSR)○○○Pulse output typePulse train
(Direction is controlled
by PLC program)Pulse train
(Direction is controlled
by PLC program)Pulse train
(Direction is controlled
by PLC program)Positioning
instructionAbsolute Current Value Read
([D]ABS)○○○Dog Search
Zero Return
(DSZR)○○○Zero Return
(ZRN)○*1○*1○*1Variable Speed Pulse Output
(PLSV)○○○Drive to Increment
(DRVI)○○○Drive to Absolute
(DRVA)○○○Interrupt Positioning
(DVIT)xx○Batch Data Positioning Mode
([D]TBL)x○○*2Pulse output typePulse train + directionPulse train + directionPulse train + direction

Details

Details

Details

*1: No DOG search function Decelerate when near point DOG turns ON, and stop when near point DOG turns OFF (Different from zero return operation with zero signal count)
*2: FX3UC-32MT-LT supported from version 2.20 or later.

page topOptional parts and spare partsServo motor connection cable

ModelLengthDescription E-GMH-200CAB2 m[MR-H series servo amplifer connection cable]
Can direcly connect FX2N-10GM/FX2N-20GM and servo amplifer.
I/O operation signal part has 20-pin connector for connection to Mtisubishi terminal block. E-GMJ-200CAB2 m[MR-J series servo amplifer connection cable]
Can direcly connect FX2N-10GM/FX2N-20GM and servo amplifer.
I/O operation signal part has 20-pin connector for connection to Mtisubishi terminal block. E-GMJ2-200CAB1A2 m[MR-J2, MR-J2-Super series servo amplifer connection cable]
Can direcly connect FX2N-10GM/FX2N-20GM and servo amplifer. E-GMC-200CAB2 m[MR-C series servo amplifer connection cable]
Can direcly connect FX2N-10GM/FX2N-20GM and servo amplifer.
I/O operation signal part has 20-pin connector for connection to Mtisubishi terminal block. E-GM-200CAB2 m[General purpose connection cable]
Has connector on both sides.
Can connect to general purpose drive unit via Mitsubishi terminal block.

Connector for self-manufactured I/O cable (an electric wire or a crimp tool is not enclosed.)

ModelDescription FX2C-I/O-CON[Flat Cable Connector]
AWG28 (0.1 mm2): A set of 10 pcs
Crimp connector: FRC2-A020-3OS 1.27-pitch 20 cores
Crimp tool: Separately arrange the tool manufactured by DDK Ltd.
357J-4674D Main Unit
357J-4664N Attachment FX2C-I/O-CON-S[Connector for bared wire]
AWG22 (0.3 mm2): 5 sets
Housing: HU-200S2-001
Crimp contact: HU-411S
Crimp tool: A product manufactured by DDK Ltd. is separately required.
357J-5538FX2C-I/O-CON-SA[Connector for bared wire]
AWG20 (0.5mm2): 5 sets
Housing: HU-200S2-001
Crimp contact: HU-411SA
Crimp tool: A product manufactured by DDK Ltd. is separately required.
357J-13963

Extension connection cable

ModelLengthDescription FX2N-GM-65EC65 cm[Connection extension cable between PLC and FX2N-10GM/FX2N-20GM]
One cable cable can be used in a system.
Standard connection cable (55mm) is included with FX2N-10GM/FX2N-20GM.F2-RS-5CAB5 m[Resolver extension cable for FX2N-1RM]
Resolver can be extended up to 100m extension by linking multiple cables.

Connection cable for peripheral devices

ModelLengthDescription (1) E-20TP-CAB03 m[E-20TP connection cable]
FX2N-10GM/FX2N-20GM (MINI DIN 8-pin) ⇔ E-20TP (MINI DIN 8-pin)
Cable length is different between (1) and (2).
(1) E-20TP-CAB0 (3 m) is included with E-20TP-SET0.(2) FX-20P-CAB01.5 m

Spare parts

ModelLengthDescriptionFX2N-GM-5EC55 mm[Connection cable between PLC and FX2N-10GM/20GM]
One cable is included with FX2N-10GM/20GM.

CC-link

ModelMaster station
functionRemote/slave
functionDistanceApplicable FX PLCFX
3SFX
3GFX
3UFX
3GCFX
3UC FX3U-16CCL-M*1
CC-link
master block
(Master station)○x1,200 m maximumx○
Max.
1 unit*4
○
Max.
1 unit*2
○
Max.
1 unit*2
*3
○
Max.
1 unit FX2N-32CCL
CC-link
Interface block
(Remote device station)x○1,200 m maximumx○○*2
○*2
○ FX3U-64CCL
CC-link
Interface block
(Intelligent
device station)x○1,200 m maximumx○
Max.
1 unit○
Max.
1 unit*2
○
Max.
1 unit*2
*3
○
Max.
1 unit

*1: The FX3U-16CCL-M, FX2N-16CCL-M cannot be used at the same time with the FX2N-32ASI-M.
The FX3U-16CCL-M cannot be used at the same time with the FX2N-16CCL-M.
FX3U-16CCL-M and FX2N-16CCL-M cannot be used together.
[Remote I/O station]
Maximum 8 stations can be connected (1 station occupies 32 I/O points of the PLC)
[Total of remote device stations + intelligent device stations]
Maximum 8 stations can be connected (However, the total number of RX/RY points is 256 or less)

*2: When connecting to FX3GC,FX3UC, FX2NC-CNV-IF or FX3UC-1PS-5V is required.
*3: FX3UC supported from version 2.20 or later.
*4: FX3U supported from version 2.20 or later.

page topCC-link/LT

ModelMaster station
functionRemote/slave
functionApplicable FX PLCFX
3SFX
3GFX
3UFX
3GCFX
3UC FX2N-64CL-M
CC-link/LT
master block○xx○
Max.
8 units○
Max.
8 units*1
○
Max.
5 units*1
○
Max.
5 units FX3UC-32MT-LT
Built-in CC-link/LT
master○x----- FX3UC-32MT-LT-2
Built-in CC-link/LT
master○x-----

*1: When connecting to FX3GC,FX3UC, FX2NC-CNV-IF or FX3UC-1PS-5V is required.

page topCC-link/LT: Power AdapterDedicated Power Supply

ModelApplicable FX PLCFX
3SFX
3GFX
3UFX
3GCFX
3UC CL1PAD1
Power Adapterx○○○○CL1PSU-2A
Dedicated Power Supplyx○○○○

page topEthernet

ModelApplicable FX PLCFX
3SFX
3GFX
3UFX
3GCFX
3UC FX3U-ENET-Lxx*1
○
Max.
1 unitx*1
*2
○
Max.
1 unit FX3U-ENET-ADP*7
*8
○
Max.
1 unit*3
*5
○
Max.
1 unit*4
*6
○
Max.
1 unit*3
○
Max.
1 unit*4
*6
○
Max.
1 unit

*1: FX3U,FX3UC supported from version 2.21 or later.
*2: When connecting to FX3UC, FX2NC-CNV-IF or FX3UC-1PS-5V is required.
*3: FX3G, FX3GC supported from version 2.20 or later.
*4: FX3U, FX3UC supported from version 3.10 or later.
*5: When connecting to FX3G, FX3G-CNV-ADP is required.
*6: When connecting to FX3U or FX3UC-32MT-LT(-2), a function expansion board is required.
*7: When connecting to FX3S, FX3S-CNV-ADP is required.
*8: When connecting to FX3S, supported by FX3U-ENET-ADP Ver.1.20 or later.

page topMODBUS

ModelApplicable FX PLCFX
3SFX
3GFX
3UFX
3GCFX
3UC FX3U-232ADP-MB
Special adapter for
RS-232C communication*7
○
Max.
1 unit*1
*2
*3
○
Max.
2 units*4
*5
○
Max.
2 units*6
○
Max.
2 units*4
*5
○
Max.
2 units FX3U-485ADP-MB
Special adapter for
RS-485 communication*7
○
Max.
1 unit*1
*2
*3
○
Max.
2 units*4
*5
○
Max.
2 units*6
○
Max.
2 units*4
*5
○
Max.
2 units

*1: FX3G 14pt, 24pt models: 1 unit. 40pt, 60pt models: 2 units.
*2: When connecting to FX3G, FX3G-CNV-ADP is required.
*3: FX3G supported from version 1.30 or later.
*4: When connecting to FX3U,FX3UC-32MT-LT(-2), Function expansion board is required.
*5: FX3U, FX3UC supported from version 2.40 or later.
*6: FX3GC supported from version 1.40 or later.
*7: When connecting to FX3S, FX3S-CNV-ADP is required.

page topPROFIBUS

ModelApplicable FX PLCFX
3SFX
3GFX
3UFX
3GCFX
3UC FX3U-64DP-M
PROFIBUS-DP
Master blockxx*1
○x*1
*2
*3
○ FX3U-32DP
PROFIBUS-DP
Interface blockx*4
○*1
○*5
*6
○*1
*2
*3
○

*1: FX3U, FX3UC supported from version 2.21 or later.
*2: When connecting to FX3UC, FX2NC-CNV-IF or FX3UC-1PS-5V is required.
*3: FX3UC-32MT-LT(-2) is not supported.
*4: FX3G supported from version 1.00 or later.
*5: When connecting to FX3GC, FX2NC-CNV-IF or FX3UC-1PS-5V is required.
*6: FX3GC supported from version 1.40 or later.

page topSensor Solution

ModelApplicable FX PLCFX
3SFX
3GFX
3UFX
3GCFX
3UC FX3U-128BTY-M
AnyWire Bitty series
master blockx*1
○
Max.
1 unit*3
○
Max.
1 unit*2
*4
○
Max.
1 unit*3
*4
○
Max.
1 unit FX3U-128ASL-M
AnyWireASlink system
special adapterx*1
○
Max.
1 unit*3
○
Max.
1 unit*2
*4
○
Max.
1 unit*3
*4
○
Max.
1 unit

*1: FX3G supported from version 1.00 or later.
*2: FX3GC supported from version 1.40 or later.
*3: FX3U, FX3UC supported from version 2.20 or later.
*4: When connecting to FX3GC, FX3UC, FX2NC-CNV-IF or FX3UC-1PS-5V is required.

page topRS-232C communication

ModelCommunication FunctionApplicable FX PLCN:N networkParallel linkComputer linkNon-Protocol CommunicationPeripheral device communicationFX
3SFX
3GFX
3UFX
3GCFX
3UC FX3G-232-BD
Function expansion
board for RS-232C
communicationxx○○○*10
○
Max.
1 unit*1
○
Max.
2 unitsxxx FX3U-232-BD
Function expansion
board for RS-232C
communicationxx○
Max.
1 unitx*2
○
Max.
1 unit FX3U-232ADP-MB
Specific adapter
for RS-232C
communicationxx○○○*11
○
Max.
1 unit*1
*3
*7
○
Max.
2 units*4
*8
○
Max.
2 units*9
○
Max.
2 units*4
*8
○
Max.
2 units FX2N-232IF
Special block
for RS-232C
communicationxxx○xxx○
Max.
8 unitsx*5
*6
○
Max.
8 units

*1: FX3G 14pt, 24pt models: 1 unit. 40pt, 60pt models: 2 units.
*2: Can only be connected to FX3UC-32MT-LT(-2).
*3: When connecting to FX3G, FX3G-CNV-ADP is required.
*4: When connecting to FX3U,FX3UC-32MT-LT(-2), Function expansion board is required.
*5: When connecting to FX3UC, FX2NC-CNV-IF or FX3UC-1PS-5V is required.
*6: For FX3UC-32MT-LT(-2), 7 units. For FX3UC-**MT/D, FX3UC-**MT/DSS, and FX3UC-16MR/D(S)-T, 8 units.
*7: FX3GC supported from version 1.30 or later.
*8: FX3U, FX3UC supported from version 2.40 or later.
*9: FX3GC supported from version 1.40 or later.
*10: Function expansion board and FX3S-CNV-ADP cannot be used together.
*11: When connecting to FX3S, FX3S-CNV-ADP is required.

page topRS-485 communication

ModelCommunication FunctionApplicable FX PLCN:N networkParallel linkComputer linkNon-Protocol CommunicationPeripheral device communicationFX
3SFX
3GFX
3UFX
3GCFX
3UC FX3G-485-BD
Function expansion
board for RS-485
communication○○○○x*8
○
Max.
1 unit*1
○
Max.
2 unitsxxx FX3G-485-BD-RJ
Function expansion board
for RS-485 communication
(RJ-45 connector type)*8
○
Max.
1 unit*1
○
Max.
2 unitxxx FX3U-485-BD
Function expansion
board for RS-485
communicationxx○
Max.
1 unitx*2
○
Max.
1 unit FX3U-485ADP-MB
Specific adapter
for RS-485
communication○○○○x*9
○
Max.
1 unit*1
*3
*5
○
Max.
2 units*4
*6
○
Max.
2 units*7
○
Max.
2 units*4
*6
○
Max.
2 units FX-485PC-IF-SETRS-232C/RS-485
converter interfacexx○xx○○○○○

*1: FX3G 14pt, 24pt models: 1 unit. 40pt, 60pt models: 2 units.
*2: Can only be connected to FX3UC-32MT-LT(-2).
*3: When connecting to FX3G, FX3G-CNV-ADP is required.
*4: When connecting to FX3U,FX3UC-32MT-LT(-2), Function expansion board is required.
*5: FX3G supported from version 1.30 or later.
*6: FX3U, FX3UC supported from version 2.40 or later.
*7: FX3GC supported from version 1.40 or later.
*8: Function expansion board and FX3S-CNV-ADP cannot be used together.
*9: When connecting to FX3S, FX3S-CNV-ADP is required.

page topRS-422 communication

ModelCommunication FunctionApplicable FX PLCN:N networkParallel linkComputer linkNon-Protocol CommunicationPeripheral device communicationFX
3SFX
3GFX
3UFX
3GCFX
3UC FX3G-422-BD
Function expansion
board for RS-422
communicationxxxx○*3
○
Max.
1 unit*1
○
Max.
2 unitsxxx FX3U-422-BD
Function expansion
board for RS-422
communicationxx○
Max.
1 unitx*2
○
Max.
1 unit

*1: FX3G 14pt, 24pt models: 1 unit. 40pt, 60pt models: 2 units.
*2: Can only be connected to FX3UC-32MT-LT(-2).
*3: Function expansion board and FX3S-CNV-ADP cannot be used together.

page topUSB communication

ModelCommunication FunctionApplicable FX PLCN:N networkParallel linkComputer linkNon-Protocol CommunicationPeripheral device communicationFX
3SFX
3GFX
3UFX
3GCFX
3UC FX3U-USB-BD
Function expansion
board for USB
communicationxxxx○xx○
Max.
1 unitx*
○
Max.
1 unit

*: Can only be connected to FX3UC-32MT-LT(-2).

page topCommunication functionCC-link

CC-link is an open network enabling connection of various FA equipment.
We prepare a master unit setting FX PLC as master blocks of CC-link, as well as an interface setting them as remote device stations of CC-link.

Details

CC-link/LT

CC-link/LT is an open network in the open network CC-link family designed to reduce wiring in the cabinet and the machine.
Also, FX3UC-32MT-LT(-2) has CC-link/LT master functionality built-in, so reduced wiring network can be easily achieved.

Details

N:N network

This network connects multiple FX PLCs (maximum 8 units) and performs automatic data exchange between each PLC. linked devices are exchanged between each PLC, and all connected PLCs can share (monitor) linked devices.

Details

Parallel link

Bit devices (M) and word devices (D) automatically refresh.

Details

Computer link

A computer as master can connect to FX series as slave.
Supports "computer link protocol formats 1 and 4" on the computer side.

Details

Non-Protocol Communication

Non-proocol serial communication is possible to devices with RS-232C or RS-485 (422) communication interface (PC, barcode reader, etc).

Details

Peripheral device communication

PC, GOT, and HPP can connect to RS-232C/RS-422/USB (USB can be used by PC only) and perform PLC program transfer and monitoring.

Details

inverter communication

Mitsubishi inverter prococol and dedicated instructions for communication control are built into FX3 series PLC. Mitsubishi inverters can be easily controlled just by adding an RS-485 communication device.

Details