China Mixer Meat Grinder Motor Stator Coil Winding Powder Coating Machine

Quick Detail:
1. Model No.: ND-XQTF-10
2. It is used for 2 poles commutator motor stator.
3. The armature stator powder coating machine has count function.
4. Working hours can be decied by customer.
5. The coil powser coating Machine working ability 120~180pcs/h

Description:
This Staotr Coil Powder Coating Machine is used for stator coil powder coating insulation.The machine has count function.Working hours can be decied by customer. Machine working ability 120~180pcs/h

Machine composition:
(1) XQTF-10 Coil powder coating machine: 1set, including:
1.1 Machine mainframe 1set
Outline dimension:L1253xW1300(include powder cleaning room 500mm) xH2100mm
The room body manufactured by 1.2mm A3 cold rolled plate.
1.2 DC electrical heating device: 1set
Heating power(0~10KW, clearance working way)adjustable,it can set heating time.
1.3 Pneumatic rise and decline device 1 set
1.4 Fluidized bed coating device: 1set
All PVC plate manufacture, with detachable air chamber and micro-hole sheet.
1.5 .Powder vibration device 1set
1.6. First step pulse recycling in the back 1set, with 2pcs filter element and pulse auto back flushingfunction, it can clean the powder in the filter element automatically without turning off the machine, with 1 set powder-blowing gun.
1.7 The coating room doorway install photo-electricity protection(raster)device, this keep the user saver when operating.
1.8 The machine has count function.
(1) Powder secondary recycling machine(outline dimension L830xW830xH1700mm): 1 set
(2) Use 25 type pulse back flushing filter element way recycling machine, motor power 2.2KW.

Working process:
(1) Load the coil (1pc) to the sling fitting and insert each wire head(heated) into the connection groove, compact inching cylinder.
(2)Turn on the switch (go up and down, heating, coating etc controlled by time relay to work automatically)
(3) After finish coating (the powder adhere to the stator coil and through melting and leveling preliminary, there's a little powder in the inside and outside of the stator lamination, but not melt, it can clean completely by preliminary air blowing and subsequent cleaning).Take it down and transmit toanother person, clean the inside and outside of the stator with air blowing gun in the powder cleaning entrance,then put it on the shelf (prepared by customer) for natural cooling -- put into oven together for baking (prepared by customer, the bake requirement of the powder in the oven is the oven temperature rise to the needed temperature for curing powder(this depend on the enameled wire heat- resisting temperature and powder curing requirement), keep hot insulation for over 40 minutes).

Electric requirement:
(1)Electricity: 380V±10%, 50HZ. Electricity supply way: three phase four wire system.
(2)Compressed air: 0.6Mpa containing oil:≤0.1ppm containing water: ≤ 1.3g/m3
NoNameDesign parameterRemark1Workpiece nameMotor stator coil 2Workpiece materialEnameled wire 3Workpiece DimensionStator lamination diameter<Φ95mm
stator lamination thickness(includecoil height)<100mm Max 4Workpiece weight<3 Kg Max/pc 5Output120~180pcs/hThis output means the machine working ability;
it depends on the powder characteristic.6Working hours Decide by customer


With good service, unique philosophy, professional team and reliable quality, we win the worldwide customers' confidence gradually. We directly and indirectly supply our products to more than 50 countries .
Customerized service1. Customized product design and manufacturing2. Customized tranning3.Technical suggestionsAfter-sales service1. Warranty Period: 12 month usually2. Overseas service center available
3. Engineers available to service overseas

Established in 2007, NIDE is a company devoted in the field of electric motors manufacturing, providing one-stop service for its customers.
NIDE has three main business divisions.
The first division is to provide different kinds of motor manufacturing machines, it is our Main business, including stand along machine, fully-auto complete line for armature and stator production, and the motor assembly line.
The second division is to supply the full range of motor components such as commutator, ball bearing, carbon brush, insulation paper, shaft, magnet, fan, motor cover, etc.
The third division is to provide technical support and consulting, project support and turn-key service for some motor manufacturing.