Business Type:
Manufacturer/Factory
Establishment:
2012
R&D Capacity:
ODM, OEM, Other
OEM/ODM Service
Sample Available

Organophilic Clay, Modified Bentonite, Rheological Additive manufacturer / supplier in China, offering Modified Bentonite Cp-10 for Inks, Easy Dispersion Organo Bentonite, Good Anti Setting Organic Bentonite Organoclay and so on.

1
    YRS
General Supplier
Supplier Homepage Chemicals Additive China Modified Bentonite Counter to Bentone 38

China Modified Bentonite Counter to Bentone 38

Get Latest Price
Min. Order / Reference FOB Price
1 Ton US $2000.00/ Ton
Local Area: Hangzhou, Zhejiang, China
R&D Capacity: OEM, ODM, Other
Payment Terms: LC, T/T, PayPal
Efficacy: Improve The Thixotropy
Classification: Chemical Additives
Type: Rheologial Additive
Solvent based Organoclay Rheological Additive CP-180
CP-180 is an organo clay (modified montmorillonite) counter to Bentone 38, designed especially for use in solvent based system including intermediate and low polarity range organic liquid.
Advantages
Exerts gelling efficiency over a wide range of intermediate and low polarity.
Easy dispersing.
The gel is colourless and of high clarity.
Produce reproducible thixotropic consistency over a wide temperature range
Imparts particle suspension, sag resistance without impairing flow and leveling, preventing hard settling of pigment and fillers.
Exerts strong film reinforcing action in organic binder systems.
Typical properties
CompositionOrganic derivative of a montmorillonite clay
AppearanceFine white powder
Moisture content(105º C, 2hr)≤ 3.5%
Loss on ignition, %(1000º C)27%-30%
Bulk density0.53G/cm3
Fineness (200 mesh)≥ 98%
Application
Transparent coatings
Lubricant Grease, ink, sealant.
Cosmetic.
Nano-composite.
Replacement of fumed silica.
Using
CP-180 disperses under high shear and requires a polar activator (30%~40%) for best efficiency. Heat is not required to obtain good dispersion. Addition levels are typically in 0.2%~2.0%. Polar activator (95% Ethanol or 95% Methanol) is needed. Normally addition level of polar activator is recommended to be 30%~40% of CP-180 in weight.