China Modular Animal Feed Plant

High Output Animal Feed Pellet Machine
Making Pellet Plant
The following introduction and instructions are based on SKJZ3000 feed set.

ModelTotal Power
(kw)Output
(t/h)Floor Area (m)
(Lx W x H )Main EquipmentSKJZ300075Mash: 3-4
Granule: 0.5-28x 6 x 8SFSP568 22kw,
SLHY0.6, SZLH25, SNSZ80Re: We can choose the main single machine according to customer' s requirements and can specially design the size of a factory and technical format, etc,
Definition of 'feed set':
Feed set is short for manual feeding small feed production set, of which the capacity is usually less than 5 tons per hour. It takes modular design to make it easier to load, ship and install. Also, this feed set can save budget and get repaid more quickly. In this modular structure, feed set takes up less area, need lower requirements for workshop, and costs less for basement investment. Also, buyers can customize according to their specific needs. Feed set is particularly suitable for small feed plants or farms.
Brief introduction of processing flow:
SKJZ3000 feed set takes manual way of adding raw materials. Its designed capacity is 2-3T/H for powder feed and 1-1.5T/H for pellet feed. During the processing, raw materials need weighing ahead, and then will be put into the production line from two different feeding gates. Materials which need grinding will be put into the hammer mill from pellet feeding gate by lot. Materials which don't need grinding will be put into the line from powder feeding gate. The materials having been mixed can either be sent directly into product bin as powder feed or be sent into pelletizing process to be pelletized and cooled to be pellet feed, which need manual scaling and packing.
The total power of this feed set is about 87kw, taking an area of 12*6*8m, equipped with 0.2T boiler. The whole feed set takes joint frame that is in tight design, reasonable structure and is eco-friendly. Also, the feed set can be specially designed according to buyers needs.
Technical Procedure:
Introduction of technical features and processes
Raw material receiving and cleaning process:
Pellet and powder raw materials will be put into the production line separately from two different feeding gates. Pellet raw materials will be cleaned by pre-cleaner and then put into hammer mill. Powder raw materials need cleaning ahead.
Grinding process:Taking FDSP tear-circle hammer milll which can make both coarse grinding and fine grinding, the feeder is combined together with the pre-cleaner which can clean the material and also feeding into the hammer mill, variable frequency control, evenly feeding and equipped with pulse filter. Mechanical induct discharging. The process is simple and with low cost, it is suitable for small capacity and multi type of material's grinding.
Grinding machine: SFSP568-I, 22KW, designed capacity 2-3T/H.
Mixing process: Above the mixer, there is a bin for mixing that can make the production continuous. Materials having been mixed can be sent to bin for pelletizing or product bin, which satisfied the production need of both powder feed and pellet feed.
Mixing machine: Double shaft paddle mixer FHSJ0.5, 5.5KW, 250KG/LOT, designed capacity 2-3T/H. Mixing evenness CV≤5%.
Pelletizing process: Taking one pellet mill with single conditioner which is suitable for normal poultry feed and ruminant feed production. Finished pellets will be sent into cooling and vibrating sieve and then be packed.
Pelletizing machine: Pellet Mill SZLH25, 22KW, designed capacity 1-1.5T/H(¢3.5 ordinary chicken feed formula)
Cooling machine: Counter flow cooling sieve SNSZ120, designed capacity 1-2T/H.
Auxiliary Process: equipped with liquid adding system, oil can be added in mixer to improve the palatability of feed; equipped with air compressor, which provide compressed air for pneumatic parts of the production line.
According to individual needs of different buyers, the solution can be optimized: