China Movable Frameless Glass Wall for Office Shopping Mall Hotel

Neuwall Glass Partition Walls (frameless)

General Description:Glass partition walls are suspended from overhead tracks - no floor tracks or guides are needed. Floor pins are required to keep the panels secure in the opening.
framework: A pre-finished 100mm length aluminium clip on top and bottom

Partitions Panel: 12mm toughened safety glass

Glass Tolerances: Toughened glass cannot be supplied completely flat. The maximum permitted deviation from a straight line is 0.30% (3mm per metre run) measured across the full pane of glass on the concave surface and in the vertical plane and supported at all four edges. 3mm - 5mm vertical edge tolerance to frameless glass doors assuming a flat and level floor and ceiling. This tolerance may be increased subject to prevailing site conditions.

Panel Joint: Clear dry pvc joint and Top&bottom Mohair Brush
Manifestation: A wide range of film manifestation and screen printing available as optional extra.

Module: 700mm - 1200mm maximum.

Height: Up to 3000mm.

Tolerance:+ / - 5mm.

Weight:30.00Kg/m2 for 12mm glass.

Finishes:Satin anodised or polyester powder coating to all exposed aluminium components available in a wide range of colours as standard.

Door Furniture: Satin stainless steel handle and hinge. Additional finishes and levers areavailable as optional extra.

Acoustic Performance: A glass module with 12mm glass will achieve up to 33 Rw db